[Thu Jun 6 20:01:34 2013] Detection parameters: Position = (368.0, 348.1) = 15 22 20.75 27 44 53.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 185.0 +/- 29.8 Background counts = 304.4 Rate = 0.01 +/- 0.002 [Thu Jun 6 20:01:34 2013] Off-axis axis estimate = 6.20' [Thu Jun 6 20:04:53 2013] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting [Thu Jun 6 20:04:53 2013] Initial guess for spatial extent in simple fitting = 9.53" [Thu Jun 6 20:04:53 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.244 [Thu Jun 6 20:04:53 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 9.53" [Thu Jun 6 21:39:14 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src24.ximg exists [Thu Jun 6 21:39:14 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src24_1.ximg exists [Thu Jun 6 21:39:14 2013] Fit fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_src24 appears to have run properly [Thu Jun 6 21:39:15 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Thu Jun 6 21:39:15 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Thu Jun 6 21:39:15 2013] Fit fullrun_pn_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Fri Jun 7 01:55:53 2013] Spatial fit model total counts = 7735.420000, observed total counts = 3595.000000 [Fri Jun 7 01:55:53 2013] Poor agreement between spatial fit and data for source 25 It may help to tweak spatial fit manually Not incorporating fit results [Fri Jun 7 01:55:53 2013] Spatial fit model total counts = 4038.830000, observed total counts = 3839.000000 [Fri Jun 7 01:55:53 2013] Offset between fit and detection position for source 25 = 2.434248 pixels [Fri Jun 7 01:55:53 2013] 3900.497000 total counts/ 3662.080000 bgd. counts: snr = 3.939792 Spatial fit parameters: Offset between fit and detection position for source 25 = 2.434248 pixels Position = (368.2, 350.5) = 15 22 20.69 27 45 5.1 Extent = 14.3 (7.9-19.1)", rotation angle = 0 Source counts = 238.4 +/- 62.5 Background counts = 3662.1 Rate = 0.01 +/- 0.003 [Fri Jun 7 01:55:53 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 01:55:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 01:55:53 2013] Assessing source extent using major axis lower bound [Fri Jun 7 01:55:53 2013] Source does appear to be extended [Fri Jun 7 01:55:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 01:55:53 2013] Source is confused with source 21 [Fri Jun 7 01:56:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Jun 7 01:56:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Jun 7 01:56:36 2013] Initial guess for spatial extent in simple fitting = 14.34" [Fri Jun 7 01:56:36 2013] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.971 [Fri Jun 7 01:56:36 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 14.34" [Fri Jun 7 03:52:30 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src21.ximg exists [Fri Jun 7 03:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src21.csv [Fri Jun 7 03:52:30 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src21_1.ximg exists [Fri Jun 7 03:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src21.csv [Fri Jun 7 03:52:30 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 03:52:31 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists [Fri Jun 7 03:52:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src21.csv [Fri Jun 7 03:52:31 2013] fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists [Fri Jun 7 03:52:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src21.csv [Fri Jun 7 03:52:31 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112240201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 08:50:39 2013] Spatial fit model total counts = 5889.290000, observed total counts = 5300.000000 [Fri Jun 7 08:50:39 2013] Poor agreement between spatial fit and data for source 25 It may help to tweak spatial fit manually Not incorporating fit results [Fri Jun 7 08:50:39 2013] Source 25 is offset by -0.698183 and 2.977331 pixels which is larger than 2 X fitted extent = 8.599357 x 1.107030, not incorporating fit results [Fri Jun 7 08:50:39 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 08:50:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 08:50:39 2013] Assessing source extent using major axis lower bound [Fri Jun 7 08:50:39 2013] Source does appear to be extended [Fri Jun 7 08:50:39 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 08:51:07 2013] XMMSAS src. selection expression = ellipse(31981.988700, 30447.841800, 860.466025, 860.466025, 0.000000, X, Y) [Fri Jun 7 08:51:07 2013] Writing source region out to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src25_src.reg [Fri Jun 7 08:51:07 2013] Extracting stamp from image fullrun_pn_xmm0112240201_pi300-10000_cl_sm2.00.img.gz, (319, 301) - (418, 400) [Fri Jun 7 08:51:07 2013] XMMSAS bgd. selection expression = annulus(31981.988700, 30447.841800, 1434.110041, 2868.220083, X, Y) && !ellipse(29634.939941, 27089.974884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30642.125305, 29076.789062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29890.823700, 29112.655853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31352.404053, 29112.722229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30919.992706, 28132.811981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30565.947205, 27640.203156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31020.480255, 26752.804749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31819.251129, 31544.123718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32260.466553, 30921.646790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.718201, 30521.276337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31356.338806, 30043.182556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31936.343231, 29516.923889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32526.872192, 29013.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32382.730652, 27966.046936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32185.005310, 27029.599518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.954865, 32245.850616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32401.597290, 31907.958313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31183.719421, 31457.460907, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jun 7 08:51:07 2013] Writing fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src25.gif [Fri Jun 7 09:12:58 2013] Mean detx,y = (6214.34, -355.63) [Fri Jun 7 09:13:01 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 7 09:13:27 2013] Binned source spectrum to 10 counts/bin [Fri Jun 7 09:13:27 2013] Setting source spectrum file to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src25_src_b10.pi.gz [Fri Jun 7 09:13:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src25_bgd.pi.gz [Sat Jun 8 10:50:43 2013] Updating aperture counts using extracted products [Sat Jun 8 10:50:43 2013] Total counts from fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 4116.00 [Sat Jun 8 10:50:43 2013] Total counts from fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src25_bgd.pi.gz = 8097.00 [Sat Jun 8 10:50:43 2013] Got source and background scale factors 2065763.000000, 6913922.000000 [Sat Jun 8 10:50:43 2013] User source parameters: Position = (368.2, 350.5) = 15 22 20.69 27 45 5.1 Extent = 14.3 (7.9-19.1)", rotation angle = 0 Source aperture counts = 1696.8 +/- 65.2 Background aperture counts = 2419.2 Rate = 0.09 +/- 0.003 [Sat Jun 8 10:50:53 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 10:50:53 2013] Using photon index=1.80, rate=0.0128, arf fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src25.arf [Sat Jun 8 10:50:53 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 10:50:53 2013] Updating source flux to 4.5e-14 [Sat Jun 8 10:51:29 2013] Flag b found in src. 25 procflags, skipping spectral fitting [Sat Jun 8 10:51:29 2013] Flag p found in src. 25 procflags, skipping spectral fitting [Sat Jun 8 10:51:29 2013] Flag c found in src. 25 procflags, skipping spectral fitting [Sat Jun 8 10:51:33 2013] xmm0112240201/analysis//spectral/fullrun_pn_xmm0112240201_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete