[Thu Jun  6 20:02:04 2013] Detection parameters:
  Position = (273.3, 201.7) = 15 22 51.77 27 34 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.7 +/- 9.5
  Background counts = 21.2
  Rate = 0.002 +/- 0.0004

[Thu Jun  6 20:02:04 2013] Off-axis axis estimate = 7.24'
[Thu Jun  6 21:39:15 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 21:39:15 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Thu Jun  6 21:39:15 2013] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.570
[Thu Jun  6 21:39:15 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 10.05"
[Thu Jun  6 23:38:24 2013] fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_src42.ximg exists
[Thu Jun  6 23:38:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_src42.csv
[Thu Jun  6 23:38:24 2013] fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_src42_1.ximg exists
[Thu Jun  6 23:38:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_src42.csv
[Thu Jun  6 23:38:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  6 23:38:25 2013] fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Thu Jun  6 23:38:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu Jun  6 23:38:25 2013] fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Thu Jun  6 23:38:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu Jun  6 23:38:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112240201_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 01:56:06 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 12.482909 pixels away
[Fri Jun  7 01:56:06 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 01:56:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 01:56:06 2013] Assessing source extent using major
[Fri Jun  7 01:56:06 2013] Source does appear to be extended
[Fri Jun  7 01:56:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 01:56:06 2013] Deleting source due to low Poisson probability 0.8