[Thu Jul 19 10:17:47 2012] Detection parameters:
  Position = (284.5, 251.0) = 22 50 13.08 -64 26 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 347.6 +/- 49.2
  Background counts = 104.6
  Rate = 0.02 +/- 0.002

[Thu Jul 19 10:17:49 2012] Off-axis axis estimate = 3.58'
[Thu Jul 19 13:51:33 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 13:51:33 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Thu Jul 19 13:51:33 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.700
[Thu Jul 19 13:51:33 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.22"
[Thu Jul 19 15:27:27 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jul 19 15:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src5.csv
[Thu Jul 19 15:27:27 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jul 19 15:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src5.csv
[Thu Jul 19 15:27:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 15:27:28 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jul 19 15:27:28 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jul 19 15:27:28 2012] Fit fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jul 19 15:27:51 2012] Source 5 is offset by 0.877745 and 5.283389 pixels which is larger than
2 X fitted extent = 0.950198 x 0.950198, not incorporating fit results
[Thu Jul 19 15:27:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 15:27:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 15:27:51 2012] Assessing source extent using major
[Thu Jul 19 15:27:51 2012] Source does appear to be extended
[Thu Jul 19 15:27:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 17:52:18 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 17:52:18 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Thu Jul 19 17:52:18 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.700
[Thu Jul 19 17:52:18 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.22"
[Thu Jul 19 19:29:22 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jul 19 19:29:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src5.csv
[Thu Jul 19 19:29:22 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jul 19 19:29:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src5.csv
[Thu Jul 19 19:29:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:29:23 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jul 19 19:29:23 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jul 19 19:29:23 2012] Fit fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jul 19 19:29:40 2012] Source 5 is offset by 5.541057 and 6.564124 pixels which is larger than
2 X fitted extent = 1.674561 x 1.674561, not incorporating fit results
[Thu Jul 19 19:29:40 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:29:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:29:40 2012] Assessing source extent using major
[Thu Jul 19 19:29:40 2012] Source does appear to be extended
[Thu Jul 19 19:29:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:29:45 2012] XMMSAS src. selection expression = ellipse(24703.000000, 21788.924805, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 20:29:45 2012] Writing source region out to fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jul 19 20:29:45 2012] Extracting stamp from image fullrun_mos2_xmm0112240101_pi300-10000_cl_sm2.00.img.gz, (247, 214) - (322, 289)
[Thu Jul 19 20:29:45 2012] XMMSAS bgd. selection expression = annulus(24703.000000, 21788.924805, 1087.500000, 2175.000000, X, Y) && !ellipse(26843.198000, 23110.144400, 2449.088070, 2449.088070, 0.000000, X, Y) && !ellipse(25789.422058, 23560.827637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25126.432037, 24075.356384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25647.508087, 24591.478149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24806.068237, 22919.611511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24551.760000, 23806.062500, 1211.504035, 1211.504035, 0.000000, X, Y) && !ellipse(25111.797200, 24645.626200, 1132.392033, 1132.392033, 0.000000, X, Y) && !ellipse(27684.751892, 21299.906906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25832.709656, 21289.836380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26901.895264, 20842.024536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26426.337036, 20998.350006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25244.368000, 20685.000000, 1337.000038, 1337.000038, 0.000000, X, Y)
[Thu Jul 19 20:29:45 2012] Writing fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src5.gif
[Thu Jul 19 20:40:48 2012] Mean detx,y = (-782.63, -5412.53) 
[Thu Jul 19 20:40:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 20:41:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 20:41:07 2012] Setting source spectrum file to fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul 19 20:41:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul 20 05:42:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 05:42:13 2012] rmf not generated due to insufficient counts
[Fri Jul 20 06:05:39 2012] Updating aperture counts using extracted products
[Fri Jul 20 06:05:39 2012] Error reading totcts from fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 20 06:05:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 06:05:39 2012] Using photon index=1.80, rate=0.0161, arf fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src5.arf
[Fri Jul 20 06:05:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 06:05:39 2012] Updating source flux to 2.1e-13
[Fri Jul 20 06:07:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting