[Thu Jul 19 10:17:48 2012] Detection parameters:
  Position = (407.7, 363.5) = 22 48 50.60 -64 18 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.3 +/- 13.1
  Background counts = 12.7
  Rate = 0.004 +/- 0.0004

[Thu Jul 19 10:17:49 2012] Off-axis axis estimate = 9.22'
[Thu Jul 19 13:51:33 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 13:51:33 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Thu Jul 19 13:51:33 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.948
[Thu Jul 19 13:51:33 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.04"
[Thu Jul 19 15:27:28 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src27.ximg exists
[Thu Jul 19 15:27:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src27.csv
[Thu Jul 19 15:27:28 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu Jul 19 15:27:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src27.csv
[Thu Jul 19 15:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 15:27:28 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu Jul 19 15:27:28 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Jul 19 15:27:28 2012] Fit fullrun_mos2_xmm0112240101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Jul 19 15:27:51 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.834810 pixels away
[Thu Jul 19 15:27:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 15:27:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 15:27:51 2012] Assessing source extent using major
[Thu Jul 19 15:27:51 2012] Source does appear to be extended
[Thu Jul 19 15:27:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 17:52:18 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 17:52:18 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Thu Jul 19 17:52:18 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.948
[Thu Jul 19 17:52:18 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 11.04"
[Thu Jul 19 19:29:22 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src27.ximg exists
[Thu Jul 19 19:29:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src27.csv
[Thu Jul 19 19:29:23 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Jul 19 19:29:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src27.csv
[Thu Jul 19 19:29:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:29:23 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Jul 19 19:29:23 2012] fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Jul 19 19:29:23 2012] Fit fullrun_mos2_xmm0112240101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Jul 19 19:29:40 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 14.500634 pixels away
[Thu Jul 19 19:29:40 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:29:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:29:40 2012] Assessing source extent using major
[Thu Jul 19 19:29:40 2012] Source does appear to be extended
[Thu Jul 19 19:29:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 20:29:46 2012] XMMSAS src. selection expression = ellipse(35422.829468, 31578.243500, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 20:29:46 2012] Writing source region out to fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src17_src.reg
[Thu Jul 19 20:29:46 2012] Extracting stamp from image fullrun_mos2_xmm0112240101_pi300-10000_cl_sm2.00.img.gz, (370, 326) - (445, 401)
[Thu Jul 19 20:29:46 2012] XMMSAS bgd. selection expression = annulus(35422.829468, 31578.243500, 1087.500000, 2175.000000, X, Y)
[Thu Jul 19 20:29:46 2012] Writing fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src17.gif
[Thu Jul 19 20:45:50 2012] Mean detx,y = (-1771.99, 8967.36) 
[Thu Jul 19 20:45:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 20:46:00 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 20:46:00 2012] Setting source spectrum file to fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jul 19 20:46:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Jul 20 06:00:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 06:00:54 2012] rmf not generated due to insufficient counts
[Fri Jul 20 06:05:39 2012] Updating aperture counts using extracted products
[Fri Jul 20 06:05:39 2012] Error reading totcts from fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Jul 20 06:05:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 06:05:40 2012] Using photon index=1.80, rate=0.00352, arf fullrun_mos2_xmm0112240101_pi300-10000_pass1_cl_src17.arf
[Fri Jul 20 06:05:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 06:05:40 2012] Updating source flux to 6.5e-14
[Fri Jul 20 06:07:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting