[Fri Jul  6 12:14:54 2012] Detection parameters:
  Position = (356.5, 233.6) = 16 39 53.53 46 36 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.4 +/- 26.1
  Background counts = 288.6
  Rate = 0.02 +/- 0.004

[Fri Jul  6 12:14:54 2012] Off-axis axis estimate = 6.31'
[Fri Jul  6 12:19:10 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 12:19:10 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Fri Jul  6 12:19:10 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.855
[Fri Jul  6 12:19:10 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.58"
[Fri Jul  6 16:14:41 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src63.ximg exists
[Fri Jul  6 16:14:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src63.csv
[Fri Jul  6 16:14:41 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src63_1.ximg exists
[Fri Jul  6 16:14:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src63.csv
[Fri Jul  6 16:14:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 16:14:42 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Fri Jul  6 16:14:42 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Fri Jul  6 16:14:42 2012] Fit fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Fri Jul  6 17:27:19 2012] Spatial fit model total counts = 1709.880000, observed total counts = 1572.000000
[Fri Jul  6 17:27:19 2012] Offset between fit and detection position for source 63 = 2.789218 pixels
[Fri Jul  6 17:27:19 2012] 1687.284100 total counts/ 1590.130000 bgd. counts: snr = 2.436379
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 2.789218 pixels
  Position = (359.3, 233.3) = 16 39 52.36 46 36 29.9
  Extent = 10.5 (5.2-19.2)", rotation angle = 0
  Source counts = 97.2 +/- 41.1
  Background counts = 1590.1
  Rate = 0.04 +/- 0.02
[Fri Jul  6 17:27:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 17:27:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 17:27:19 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 17:27:19 2012] Source does appear to be extended
[Fri Jul  6 17:27:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 17:27:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 17:27:33 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Jul  6 17:27:33 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.067
[Fri Jul  6 17:27:33 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 10.46"
[Fri Jul  6 20:55:53 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src62.ximg exists
[Fri Jul  6 20:55:53 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Jul  6 20:55:53 2012] Fit fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src62 appears to have run properly
[Fri Jul  6 20:55:54 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Jul  6 20:55:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri Jul  6 20:55:54 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Jul  6 20:55:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri Jul  6 20:55:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 22:05:29 2012] Warning, spatial fit 62 centroid is now closest to src. 64
[Fri Jul  6 22:05:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 22:05:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 22:05:29 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 22:05:29 2012] Source does appear to be extended
[Fri Jul  6 22:05:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 22:05:45 2012] XMMSAS src. selection expression = ellipse(31211.548000, 20246.435000, 627.396018, 627.396018, 0.000000, X, Y)
[Fri Jul  6 22:05:45 2012] Writing source region out to fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src63_src.reg
[Fri Jul  6 22:05:45 2012] Extracting stamp from image fullrun_pn_xmm0112231901_pi300-10000_cl_sm2.00.img.gz, (323, 197) - (395, 269)
[Fri Jul  6 22:05:45 2012] XMMSAS bgd. selection expression = annulus(31211.548000, 20246.435000, 1045.660030, 2091.320060, X, Y) && !ellipse(32531.507874, 21711.999313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30152.174164, 21745.491180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33948.106720, 21148.987076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29073.125122, 23007.968231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29137.897217, 22655.319275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28666.799438, 22555.097229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30132.426056, 22483.398163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.790588, 22225.616058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31657.257172, 21881.363632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30829.065918, 21873.152954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30219.545532, 20397.697418, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 22:05:45 2012] Writing fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src63.gif
[Fri Jul  6 22:24:42 2012] Mean detx,y = (-4436.78, 8475.31) 
[Fri Jul  6 22:24:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 22:24:56 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 22:24:56 2012] Setting source spectrum file to fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Jul  6 22:24:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Fri Jul  6 23:11:59 2012] Not generating rmf since there are only 97 counts
[Fri Jul  6 23:11:59 2012] rmf not generated due to insufficient counts
[Fri Jul  6 23:41:37 2012] Updating aperture counts using extracted products
[Fri Jul  6 23:41:37 2012] Error reading totcts from fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Jul  6 23:41:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 23:41:38 2012] Using photon index=1.80, rate=0.0393, arf fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src63.arf
[Fri Jul  6 23:41:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 23:41:38 2012] Updating source flux to 1.7e-13
[Fri Jul  6 23:41:48 2012] Source 63 has fewer than 100.000000 counts, skipping spectral fitting