[Fri Jul  6 12:14:54 2012] Detection parameters:
  Position = (300.6, 278.5) = 16 40 17.15 46 39 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.0 +/- 21.2
  Background counts = 284.0
  Rate = 0.04 +/- 0.005

[Fri Jul  6 12:14:54 2012] Off-axis axis estimate = 1.45'
[Fri Jul  6 12:19:10 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 12:19:10 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Fri Jul  6 12:19:10 2012] source mask rpix=1.6, npix_max = 18, mask sum = 25, frac = 1.359
[Fri Jul  6 12:19:10 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 7.16"
[Fri Jul  6 16:14:40 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src50.ximg exists
[Fri Jul  6 16:14:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src50.csv
[Fri Jul  6 16:14:40 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Jul  6 16:14:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src50.csv
[Fri Jul  6 16:14:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 16:14:42 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Jul  6 16:14:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Jul  6 16:14:42 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Jul  6 16:14:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Jul  6 16:14:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 17:27:18 2012] Spatial fit model total counts = 1914.480000, observed total counts = 1577.000000
[Fri Jul  6 17:27:18 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul  6 17:27:19 2012] Warning, spatial fit 50 centroid is now closest to src. 52
[Fri Jul  6 17:27:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 17:27:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 17:27:19 2012] Assessing source extent using major
[Fri Jul  6 17:27:19 2012] Source does appear to be extended
[Fri Jul  6 17:27:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 17:27:19 2012] Source is confused with source 46
[Fri Jul  6 17:27:33 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 17:27:33 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Fri Jul  6 17:27:33 2012] source mask rpix=1.6, npix_max = 18, mask sum = 25, frac = 1.359
[Fri Jul  6 17:27:33 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 7.16"
[Fri Jul  6 20:55:52 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src49.ximg exists
[Fri Jul  6 20:55:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src49.csv
[Fri Jul  6 20:55:52 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Jul  6 20:55:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src49.csv
[Fri Jul  6 20:55:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 20:55:53 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Jul  6 20:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri Jul  6 20:55:53 2012] fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Jul  6 20:55:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri Jul  6 20:55:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 22:05:29 2012] Spatial fit model total counts = 2067.380000, observed total counts = 1554.000000
[Fri Jul  6 22:05:29 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul  6 22:05:29 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 22:05:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 22:05:29 2012] Assessing source extent using major
[Fri Jul  6 22:05:29 2012] Source does appear to be extended
[Fri Jul  6 22:05:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 22:05:45 2012] XMMSAS src. selection expression = ellipse(26101.730499, 24181.844299, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 22:05:45 2012] Writing source region out to fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src50_src.reg
[Fri Jul  6 22:05:45 2012] Extracting stamp from image fullrun_pn_xmm0112231901_pi300-10000_cl_sm2.00.img.gz, (263, 241) - (338, 316)
[Fri Jul  6 22:05:45 2012] XMMSAS bgd. selection expression = annulus(26101.730499, 24181.844299, 1087.500000, 2175.000000, X, Y) && !ellipse(25627.844940, 23437.350189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25665.669451, 27817.828422, 1491.704043, 1277.991310, 133.405836, X, Y) && !ellipse(24915.636800, 27088.206600, 943.088027, 943.088027, 0.000000, X, Y) && !ellipse(23287.834869, 25212.516052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.251953, 24826.612854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28518.542603, 23291.520050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26995.001831, 22169.114380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25592.780000, 26409.212600, 820.552024, 820.552024, 0.000000, X, Y) && !ellipse(23984.314000, 25804.324000, 1136.600033, 1136.600033, 0.000000, X, Y) && !ellipse(25651.546387, 24359.250702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23302.758789, 24581.216461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25140.246155, 24540.448486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23732.836365, 24924.761322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24304.700470, 24382.320251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.508759, 23863.856750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27390.208252, 23458.460327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29073.125122, 23007.968231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28028.124176, 23011.879089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29137.897217, 22655.319275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28666.799438, 22555.097229, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 22:05:45 2012] Writing fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src50.gif
[Fri Jul  6 22:21:10 2012] Mean detx,y = (-2721.79, 2264.60) 
[Fri Jul  6 22:21:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 22:21:23 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 22:21:23 2012] Setting source spectrum file to fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jul  6 22:21:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Jul  6 23:10:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 23:10:27 2012] rmf not generated due to insufficient counts
[Fri Jul  6 23:41:37 2012] Updating aperture counts using extracted products
[Fri Jul  6 23:41:37 2012] Error reading totcts from fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jul  6 23:41:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 23:41:38 2012] Using photon index=1.80, rate=0.0355, arf fullrun_pn_xmm0112231901_pi300-10000_pass1_cl_src50.arf
[Fri Jul  6 23:41:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 23:41:38 2012] Updating source flux to 1.2e-13
[Fri Jul  6 23:41:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting