[Fri Jul  6 12:15:40 2012] Detection parameters:
  Position = (289.2, 312.0) = 16 40 21.96 46 42 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 639.1 +/- 39.4
  Background counts = 173.4
  Rate = 0.05 +/- 0.003

[Fri Jul  6 12:15:40 2012] Off-axis axis estimate = 1.19'
[Fri Jul  6 16:40:23 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 16:40:23 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Fri Jul  6 16:40:23 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Fri Jul  6 16:40:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.02"
[Fri Jul  6 17:27:08 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul  6 17:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src3.csv
[Fri Jul  6 17:27:08 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul  6 17:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src3.csv
[Fri Jul  6 17:27:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 17:27:08 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul  6 17:27:08 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul  6 17:27:08 2012] Fit fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul  6 17:27:24 2012] Source 4 is offset by 1.757780 and 1.508756 pixels which is larger than
2 X fitted extent = 0.817462 x 0.817462, not incorporating fit results
[Fri Jul  6 17:27:24 2012] Spatial fit model total counts = 630.463000, observed total counts = 611.000000
[Fri Jul  6 17:27:24 2012] Offset between fit and detection position for source 4 = 3.479828 pixels
[Fri Jul  6 17:27:24 2012] 629.007900 total counts/ 555.687000 bgd. counts: snr = 3.110374
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.479828 pixels
  Position = (287.8, 308.8) = 16 40 22.55 46 41 58.5
  Extent = 14.0 (14.0-28.1)", rotation angle = 0
  Source counts = 73.3 +/- 25.1
  Background counts = 555.7
  Rate = 0.04 +/- 0.02
[Fri Jul  6 17:27:24 2012] Source 4 is offset by -1.557421 and -2.841448 pixels which is larger than
2 X fitted extent = 1.003871 x 1.003871, not incorporating fit results
[Fri Jul  6 17:27:24 2012] Source 4 is offset by -3.072432 and -1.305724 pixels which is larger than
2 X fitted extent = 1.762340 x 1.762340, not incorporating fit results
[Fri Jul  6 17:27:24 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 17:27:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 17:27:24 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 17:27:24 2012] Source does appear to be extended
[Fri Jul  6 17:27:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 17:27:24 2012] Source is confused with source 19
[Fri Jul  6 21:17:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 21:17:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul  6 21:17:29 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Fri Jul  6 21:17:29 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.151
[Fri Jul  6 21:17:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.04"
[Fri Jul  6 22:05:18 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul  6 22:05:18 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul  6 22:05:18 2012] Fit fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jul  6 22:05:18 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul  6 22:05:18 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul  6 22:05:18 2012] Fit fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul  6 22:05:34 2012] Source 4 is offset by 0.366097 and -1.680667 pixels which is larger than
2 X fitted extent = 0.817462 x 0.817462, not incorporating fit results
[Fri Jul  6 22:05:34 2012] Spatial fit model total counts = 760.249000, observed total counts = 740.000000
[Fri Jul  6 22:05:34 2012] Offset between fit and detection position for source 4 = 4.700039 pixels
[Fri Jul  6 22:05:34 2012] 769.998500 total counts/ 690.314000 bgd. counts: snr = 3.032847
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.700039 pixels
  Position = (285.5, 304.7) = 16 40 23.52 46 41 40.6
  Extent = 14.0" x 14.0", rotation angle = 0
  Source counts = 79.7 +/- 27.7
  Background counts = 690.3
  Rate = 0.05 +/- 0.02
[Fri Jul  6 22:05:34 2012] Source 4 is offset by 3.087848 and -2.671636 pixels which is larger than
2 X fitted extent = 0.844303 x 0.844303, not incorporating fit results
[Fri Jul  6 22:05:34 2012] Source 4 is offset by -2.169018 and -0.457360 pixels which is larger than
2 X fitted extent = 0.865646 x 0.865646, not incorporating fit results
[Fri Jul  6 22:05:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 22:05:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 22:05:34 2012] Assessing source extent using major
[Fri Jul  6 22:05:34 2012] Source does appear to be extended
[Fri Jul  6 22:05:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 23:37:59 2012] XMMSAS src. selection expression = ellipse(24792.432800, 26458.653701, 840.660024, 840.660024, 0.000000, X, Y)
[Fri Jul  6 23:37:59 2012] Writing source region out to fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul  6 23:37:59 2012] Extracting stamp from image fullrun_mos2_xmm0112231901_pi300-10000_cl_sm2.00.img.gz, (237, 256) - (334, 353)
[Fri Jul  6 23:37:59 2012] XMMSAS bgd. selection expression = annulus(24792.432800, 26458.653701, 1401.100040, 2802.200081, X, Y) && !ellipse(26862.588000, 29797.928000, 1012.600029, 1012.600029, 0.000000, X, Y) && !ellipse(25530.673523, 27509.740326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26210.477844, 27268.337097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25870.862427, 28200.077148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26462.310028, 28039.519562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25956.967682, 26913.091522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24639.571350, 27608.284393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24141.761322, 26402.285126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25001.704071, 25982.232941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27161.347382, 27001.766846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26155.396606, 29267.526367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27042.367554, 28642.869659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.589935, 25460.017883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23474.111725, 27999.795013, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 23:37:59 2012] Writing fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src4.gif
[Fri Jul  6 23:38:15 2012] Mean detx,y = (1009.14, -372.13) 
[Fri Jul  6 23:38:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 23:38:21 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 23:38:21 2012] Setting source spectrum file to fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul  6 23:38:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul  6 23:40:10 2012] Not generating rmf since there are only 79 counts
[Fri Jul  6 23:40:10 2012] rmf not generated due to insufficient counts
[Fri Jul  6 23:41:38 2012] Updating aperture counts using extracted products
[Fri Jul  6 23:41:38 2012] Error reading totcts from fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul  6 23:41:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 23:41:39 2012] Using photon index=1.80, rate=0.0482, arf fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src4.arf
[Fri Jul  6 23:41:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 23:41:39 2012] Updating source flux to 5e-13
[Fri Jul  6 23:41:47 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Fri Jul  6 23:41:47 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Fri Jul  6 23:41:47 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jul  6 23:41:48 2012] xmm0112231901/analysis//spectral/fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete