[Fri Jul  6 12:15:40 2012] Detection parameters:
  Position = (402.5, 326.2) = 16 39 34.04 46 43 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.5 +/- 21.2
  Background counts = 117.5
  Rate = 0.02 +/- 0.002

[Fri Jul  6 12:15:40 2012] Off-axis axis estimate = 7.81'
[Fri Jul  6 16:40:23 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 16:40:23 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Fri Jul  6 16:40:23 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.907
[Fri Jul  6 16:40:23 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 10.33"
[Fri Jul  6 17:27:08 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src16.ximg exists
[Fri Jul  6 17:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src16.csv
[Fri Jul  6 17:27:08 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Jul  6 17:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src16.csv
[Fri Jul  6 17:27:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 17:27:08 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Jul  6 17:27:08 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Jul  6 17:27:08 2012] Fit fullrun_mos2_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Jul  6 17:27:24 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.597754 pixels away
[Fri Jul  6 17:27:24 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 17:27:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 17:27:24 2012] Assessing source extent using major
[Fri Jul  6 17:27:24 2012] Source does appear to be extended
[Fri Jul  6 17:27:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 21:17:29 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 21:17:29 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Fri Jul  6 21:17:29 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.907
[Fri Jul  6 21:17:29 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.33"
[Fri Jul  6 22:05:18 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul  6 22:05:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src13.csv
[Fri Jul  6 22:05:18 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul  6 22:05:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src13.csv
[Fri Jul  6 22:05:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 22:05:19 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul  6 22:05:19 2012] fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul  6 22:05:19 2012] Fit fullrun_mos2_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jul  6 22:05:34 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.448030 pixels away
[Fri Jul  6 22:05:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 22:05:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 22:05:34 2012] Assessing source extent using major
[Fri Jul  6 22:05:34 2012] Source does appear to be extended
[Fri Jul  6 22:05:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 23:37:59 2012] XMMSAS src. selection expression = ellipse(34967.707001, 28328.092041, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 23:37:59 2012] Writing source region out to fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src10_src.reg
[Fri Jul  6 23:37:59 2012] Extracting stamp from image fullrun_mos2_xmm0112231901_pi300-10000_cl_sm2.00.img.gz, (365, 289) - (440, 364)
[Fri Jul  6 23:37:59 2012] XMMSAS bgd. selection expression = annulus(34967.707001, 28328.092041, 1087.500000, 2175.000000, X, Y) && !ellipse(36749.977722, 26575.045227, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 23:37:59 2012] Writing fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src10.gif
[Fri Jul  6 23:39:10 2012] Mean detx,y = (-4444.12, -9108.07) 
[Fri Jul  6 23:39:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 23:39:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 23:39:16 2012] Setting source spectrum file to fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul  6 23:39:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jul  6 23:40:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 23:40:47 2012] rmf not generated due to insufficient counts
[Fri Jul  6 23:41:38 2012] Updating aperture counts using extracted products
[Fri Jul  6 23:41:38 2012] Error reading totcts from fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul  6 23:41:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 23:41:39 2012] Using photon index=1.80, rate=0.0169, arf fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src10.arf
[Fri Jul  6 23:41:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 23:41:39 2012] Updating source flux to 2.6e-13
[Fri Jul  6 23:41:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul  6 23:41:48 2012] xmm0112231901/analysis//spectral/fullrun_mos2_xmm0112231901_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete