[Fri Jul  6 12:15:16 2012] Detection parameters:
  Position = (297.0, 318.0) = 16 40 18.66 46 42 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 796.9 +/- 42.1
  Background counts = 169.9
  Rate = 0.06 +/- 0.003

[Fri Jul  6 12:15:16 2012] Off-axis axis estimate = 1.42'
[Fri Jul  6 16:14:42 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 16:14:42 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Fri Jul  6 16:14:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Fri Jul  6 16:14:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.14"
[Fri Jul  6 16:40:22 2012] fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul  6 16:40:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_src1.csv
[Fri Jul  6 16:40:22 2012] fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul  6 16:40:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_src1.csv
[Fri Jul  6 16:40:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 16:40:22 2012] fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul  6 16:40:22 2012] fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul  6 16:40:22 2012] Fit fullrun_mos1_xmm0112231901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul  6 17:27:21 2012] Spatial fit model total counts = 559.628000, observed total counts = 559.000000
[Fri Jul  6 17:27:21 2012] Offset between fit and detection position for source 2 = 1.527941 pixels
[Fri Jul  6 17:27:21 2012] 555.485000 total counts/ 443.588000 bgd. counts: snr = 5.312862
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.527941 pixels
  Position = (296.1, 316.8) = 16 40 19.07 46 42 33.4
  Extent = 14.3 (14.2-28.6)", rotation angle = 0
  Source counts = 111.9 +/- 23.6
  Background counts = 443.6
  Rate = 0.08 +/- 0.02
[Fri Jul  6 17:27:21 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 17:27:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 17:27:21 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 17:27:21 2012] Source does appear to be extended
[Fri Jul  6 17:27:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 20:55:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul  6 20:55:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul  6 20:55:54 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Fri Jul  6 20:55:54 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.118
[Fri Jul  6 20:55:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.28"
[Fri Jul  6 21:17:28 2012] fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul  6 21:17:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_src1.csv
[Fri Jul  6 21:17:28 2012] fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul  6 21:17:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_src1.csv
[Fri Jul  6 21:17:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 21:17:28 2012] fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul  6 21:17:28 2012] fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul  6 21:17:28 2012] Fit fullrun_mos1_xmm0112231901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul  6 22:05:31 2012] Spatial fit model total counts = 1187.740000, observed total counts = 1185.000000
[Fri Jul  6 22:05:31 2012] Offset between fit and detection position for source 2 = 2.037540 pixels
[Fri Jul  6 22:05:31 2012] 1174.285000 total counts/ 583.652000 bgd. counts: snr = 24.447853
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.037540 pixels
  Position = (295.0, 315.1) = 16 40 19.51 46 42 25.8
  Extent = 28.6 (28.5-57.1)", rotation angle = 0
  Source counts = 590.6 +/- 34.3
  Background counts = 583.7
  Rate = 0.4 +/- 0.03
[Fri Jul  6 22:05:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 22:05:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 22:05:31 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 22:05:31 2012] Source does appear to be extended
[Fri Jul  6 22:05:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 22:05:31 2012] Source is confused with source 1
[Fri Jul  6 22:05:31 2012] Source is confused with source 16
[Fri Jul  6 22:05:31 2012] Source is confused with source 9
[Fri Jul  6 22:05:31 2012] Source is confused with source 12
[Fri Jul  6 23:17:01 2012] XMMSAS src. selection expression = ellipse(25616.348200, 27361.686000, 1713.468049, 1713.468049, 0.000000, X, Y)
[Fri Jul  6 23:17:01 2012] Writing source region out to fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul  6 23:17:01 2012] Extracting stamp from image fullrun_mos1_xmm0112231901_pi300-10000_cl_sm2.00.img.gz, (197, 217) - (393, 414)
[Fri Jul  6 23:17:01 2012] XMMSAS bgd. selection expression = annulus(25616.348200, 27361.686000, 2855.780082, 5711.560164, X, Y) && !ellipse(24899.652600, 26994.712000, 657.745619, 657.745619, 0.000000, X, Y) && !ellipse(25184.952000, 29190.240000, 1211.096035, 1211.096035, 0.000000, X, Y) && !ellipse(24349.788000, 26395.781400, 1160.320033, 1160.320033, 0.000000, X, Y) && !ellipse(27081.234528, 27969.163940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23417.770000, 25670.644000, 2320.640067, 2320.640067, 0.000000, X, Y) && !ellipse(26661.535461, 26591.278076, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 23:17:01 2012] Writing fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2.gif
[Fri Jul  6 23:17:03 2012] Mean detx,y = (-522.99, -127.71) 
[Fri Jul  6 23:17:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 23:17:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 23:17:16 2012] Setting source spectrum file to fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  6 23:17:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul  6 23:41:38 2012] Updating aperture counts using extracted products
[Fri Jul  6 23:41:38 2012] Error reading totcts from fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul  6 23:41:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 23:41:38 2012] Using photon index=1.80, rate=0.431, arf fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2.arf
[Fri Jul  6 23:41:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 23:41:38 2012] Updating source flux to 3.7e-12
[Fri Jul  6 23:41:40 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jul  6 23:41:47 2012] Reading fit data from xmm0112231901/analysis//spectral/fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul  6 23:41:47 2012] Spectral fit parameter nH value = 6.92438e+20
[Fri Jul  6 23:41:47 2012] Spectral fit parameter PhoIndex value = 1.6949
[Fri Jul  6 23:41:47 2012] Failed to get F(0.3-8.0) from xmm0112231901/analysis//spectral/fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul  6 23:41:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 23:41:47 2012] Using Nh = 6.9e+20, photon index=1.69, rate=0.431, arf fullrun_mos1_xmm0112231901_pi300-10000_pass1_cl_src2.arf
[Fri Jul  6 23:41:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 23:41:47 2012] Updating source flux to 4.2e-12