[Tue Aug 21 10:47:02 2012] Detection parameters:
  Position = (378.8, 279.8) = 16 39 41.20 46 40 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.9 +/- 12.5
  Background counts = 42.3
  Rate = 0.01 +/- 0.002

[Tue Aug 21 10:47:04 2012] Off-axis axis estimate = 5.98'
[Tue Aug 21 10:51:44 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:44 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Tue Aug 21 10:51:44 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.880
[Tue Aug 21 10:51:44 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 9.42"
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src77.ximg exists
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src77_1.ximg exists
[Tue Aug 21 19:48:08 2012] Fit fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src77 appears to have run properly
[Tue Aug 21 19:48:11 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Tue Aug 21 19:48:11 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Tue Aug 21 19:48:11 2012] Fit fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Tue Aug 21 21:51:25 2012] Spatial fit model total counts = 323.582000, observed total counts = 303.000000
[Tue Aug 21 21:51:25 2012] Offset between fit and detection position for source 77 = 6.073534 pixels
[Tue Aug 21 21:51:25 2012] 332.272100 total counts/ 255.653000 bgd. counts: snr = 4.791943
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 6.073534 pixels
  Position = (373.8, 276.4) = 16 39 43.31 46 40 9.1
  Extent = 18.8 (18.8-37.7)", rotation angle = 0
  Source counts = 76.6 +/- 18.2
  Background counts = 255.7
  Rate = 0.2 +/- 0.05
[Tue Aug 21 21:51:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:51:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:51:25 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 21:51:25 2012] Source does appear to be extended
[Tue Aug 21 21:51:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 21:51:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 21:51:46 2012] Initial guess for spatial extent in simple fitting = 18.84"
[Tue Aug 21 21:51:46 2012] source mask rpix=4.3, npix_max = 93, mask sum = 61, frac = 0.653
[Tue Aug 21 21:51:46 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 18.84"
[Wed Aug 22 04:49:36 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src67.ximg exists
[Wed Aug 22 04:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src67.csv
[Wed Aug 22 04:49:36 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src67_1.ximg exists
[Wed Aug 22 04:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src67.csv
[Wed Aug 22 04:49:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 04:49:39 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Wed Aug 22 04:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src67.csv
[Wed Aug 22 04:49:39 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Wed Aug 22 04:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src67.csv
[Wed Aug 22 04:49:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 06:34:22 2012] Spatial fit model total counts = 1321.040000, observed total counts = 1126.000000
[Wed Aug 22 06:34:22 2012] Poor agreement between spatial fit and data for source 77
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 22 06:34:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:34:22 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 06:34:22 2012] Source does appear to be extended
[Wed Aug 22 06:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:34:44 2012] XMMSAS src. selection expression = ellipse(32473.644000, 23994.970000, 1130.322033, 1130.322033, 0.000000, X, Y)
[Wed Aug 22 06:34:44 2012] Writing source region out to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src77_src.reg
[Wed Aug 22 06:34:44 2012] Extracting stamp from image fullrun_pn_xmm0112231801_pi300-10000_cl_sm2.00.img.gz, (309, 211) - (439, 341)
[Wed Aug 22 06:34:45 2012] XMMSAS bgd. selection expression = annulus(32473.644000, 23994.970000, 1883.870054, 3767.740108, X, Y) && !ellipse(34914.932983, 24839.503021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36621.296417, 24648.871918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35537.510803, 24659.122986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36946.652000, 23926.760000, 1821.296052, 1821.296052, 0.000000, X, Y) && !ellipse(36670.685272, 21988.207321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35300.140564, 21126.006470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36469.906000, 19200.622000, 1452.184042, 1452.184042, 0.000000, X, Y) && !ellipse(35843.858704, 25025.771912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34310.770447, 24664.520660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35253.568695, 23152.205353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34715.288055, 22062.484421, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 06:34:45 2012] Writing fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src77.gif
[Wed Aug 22 07:00:13 2012] Mean detx,y = (-3352.92, 7885.05) 
[Wed Aug 22 07:00:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 07:00:39 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 07:00:40 2012] Setting source spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed Aug 22 07:00:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Wed Aug 22 07:31:33 2012] Not generating rmf since there are only 76 counts
[Wed Aug 22 07:31:33 2012] rmf not generated due to insufficient counts
[Wed Aug 22 08:17:13 2012] Updating aperture counts using extracted products
[Wed Aug 22 08:17:13 2012] Error reading totcts from fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed Aug 22 08:17:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 08:17:15 2012] Using photon index=1.80, rate=0.204, arf fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src77.arf
[Wed Aug 22 08:17:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 08:17:15 2012] Updating source flux to 7.7e-13
[Wed Aug 22 08:17:40 2012] Flag p found in src. 77 procflags, skipping spectral fitting
[Wed Aug 22 08:17:40 2012] Source 77 has fewer than 100.000000 counts, skipping spectral fitting