[Tue Aug 21 10:47:02 2012] Detection parameters:
  Position = (282.3, 305.1) = 16 40 21.98 46 42 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.9 +/- 12.7
  Background counts = 21.7
  Rate = 0.02 +/- 0.003

[Tue Aug 21 10:47:04 2012] Off-axis axis estimate = 1.26'
[Tue Aug 21 10:51:44 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:44 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Tue Aug 21 10:51:44 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Tue Aug 21 10:51:44 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 7.06"
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src74.ximg exists
[Tue Aug 21 19:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src74.csv
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src74_1.ximg exists
[Tue Aug 21 19:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src74.csv
[Tue Aug 21 19:48:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:48:11 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Tue Aug 21 19:48:11 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Tue Aug 21 19:48:11 2012] Fit fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Tue Aug 21 21:51:25 2012] Warning, spatial fit 74 centroid is now closest to src. 99
[Tue Aug 21 21:51:25 2012] Source 74 is offset by -2.231073 and -0.480738 pixels which is larger than
2 X fitted extent = 0.820423 x 0.820423, not incorporating fit results
[Tue Aug 21 21:51:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:51:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:51:25 2012] Assessing source extent using major
[Tue Aug 21 21:51:25 2012] Source does appear to be extended
[Tue Aug 21 21:51:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 21:51:25 2012] Source is confused with source 73
[Tue Aug 21 21:51:46 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 21:51:46 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Tue Aug 21 21:51:46 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Tue Aug 21 21:51:46 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 7.06"
[Wed Aug 22 04:49:36 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src64.ximg exists
[Wed Aug 22 04:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src64.csv
[Wed Aug 22 04:49:36 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src64_1.ximg exists
[Wed Aug 22 04:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src64.csv
[Wed Aug 22 04:49:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 04:49:39 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Wed Aug 22 04:49:39 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Wed Aug 22 04:49:39 2012] Fit fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Wed Aug 22 06:34:22 2012] Warning, spatial fit 64 centroid is now closest to src. 73
[Wed Aug 22 06:34:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:34:22 2012] Assessing source extent using major
[Wed Aug 22 06:34:22 2012] Source does appear to be extended
[Wed Aug 22 06:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:34:44 2012] XMMSAS src. selection expression = ellipse(24514.410614, 26493.689819, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 06:34:44 2012] Writing source region out to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src74_src.reg
[Wed Aug 22 06:34:44 2012] Extracting stamp from image fullrun_pn_xmm0112231801_pi300-10000_cl_sm2.00.img.gz, (245, 268) - (320, 343)
[Wed Aug 22 06:34:44 2012] XMMSAS bgd. selection expression = annulus(24514.410614, 26493.689819, 1087.500000, 2175.000000, X, Y) && !ellipse(23970.458832, 23543.888550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23884.526154, 24051.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24904.946800, 26455.528000, 1064.240031, 1064.240031, 0.000000, X, Y) && !ellipse(24018.116608, 26479.673920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.032440, 25428.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.633698, 23630.115936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.122864, 24198.796661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.531097, 24224.425659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.514496, 23936.437286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.864990, 23699.712219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25301.684000, 27092.076000, 2018.080058, 2018.080058, 0.000000, X, Y) && !ellipse(24154.826721, 26913.064972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25134.967957, 26058.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.054000, 26087.074000, 1123.440032, 1123.440032, 0.000000, X, Y) && !ellipse(25848.499115, 24326.620392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25271.380707, 27764.001862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24363.952759, 27792.636353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23929.908569, 27365.994385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23540.373291, 26247.401337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23690.966553, 25454.046722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25705.990417, 28140.615112, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 06:34:44 2012] Writing fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src74.gif
[Wed Aug 22 06:58:57 2012] Mean detx,y = (-402.88, 137.12) 
[Wed Aug 22 06:58:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 06:59:14 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 06:59:15 2012] Setting source spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed Aug 22 06:59:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Wed Aug 22 07:28:50 2012] Not generating rmf since there are only 60 counts
[Wed Aug 22 07:28:50 2012] rmf not generated due to insufficient counts
[Wed Aug 22 08:17:13 2012] Updating aperture counts using extracted products
[Wed Aug 22 08:17:13 2012] Error reading totcts from fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Wed Aug 22 08:17:15 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 08:17:15 2012] Using photon index=1.80, rate=0.016, arf fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src74.arf
[Wed Aug 22 08:17:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 08:17:15 2012] Updating source flux to 3.9e-14
[Wed Aug 22 08:17:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting