[Tue Aug 21 10:46:59 2012] Detection parameters:
  Position = (449.7, 220.9) = 16 39 11.30 46 36 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.2 +/- 12.3
  Background counts = 25.6
  Rate = 0.01 +/- 0.002

[Tue Aug 21 10:47:04 2012] Off-axis axis estimate = 12.33'
[Tue Aug 21 10:51:44 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:44 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Tue Aug 21 10:51:44 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.063
[Tue Aug 21 10:51:44 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.59"
[Tue Aug 21 19:48:06 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src5.ximg exists
[Tue Aug 21 19:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src5.csv
[Tue Aug 21 19:48:06 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Aug 21 19:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src5.csv
[Tue Aug 21 19:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Aug 21 19:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Aug 21 19:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Aug 21 19:48:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:51:25 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Tue Aug 21 21:51:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:51:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:51:25 2012] Assessing source extent using major
[Tue Aug 21 21:51:25 2012] Source does appear to be extended
[Tue Aug 21 21:51:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 21:51:46 2012] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 21:51:46 2012] Initial guess for spatial extent in simple fitting = 12.59"
[Tue Aug 21 21:51:46 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.063
[Tue Aug 21 21:51:46 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.59"
[Wed Aug 22 04:49:34 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src5.ximg exists
[Wed Aug 22 04:49:34 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Aug 22 04:49:34 2012] Fit fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Aug 22 04:49:37 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Aug 22 04:49:37 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Aug 22 04:49:37 2012] Fit fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Aug 22 06:34:22 2012] Spatial fit model total counts = 208.338000, observed total counts = 200.000000
[Wed Aug 22 06:34:22 2012] Offset between fit and detection position for source 5 = 0.788514 pixels
[Wed Aug 22 06:34:22 2012] 176.965700 total counts/ 146.908000 bgd. counts: snr = 2.479893
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.788514 pixels
  Position = (450.3, 221.5) = 16 39 11.08 46 36 9.5
  Extent = 7.7 (3.1-14.3)", rotation angle = 0
  Source counts = 30.1 +/- 13.3
  Background counts = 146.9
  Rate = 0.08 +/- 0.04
[Wed Aug 22 06:34:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:34:22 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 06:34:22 2012] Source does appear to be extended
[Wed Aug 22 06:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:34:22 2012] Source is confused with source 33
[Wed Aug 22 06:34:42 2012] XMMSAS src. selection expression = ellipse(39125.630000, 19219.874920, 464.011813, 464.011813, 0.000000, X, Y)
[Wed Aug 22 06:34:42 2012] Writing source region out to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src5_src.reg
[Wed Aug 22 06:34:42 2012] Extracting stamp from image fullrun_pn_xmm0112231801_pi300-10000_cl_sm2.00.img.gz, (424, 195) - (477, 248)
[Wed Aug 22 06:34:42 2012] XMMSAS bgd. selection expression = annulus(39125.630000, 19219.874920, 773.353022, 1546.706045, X, Y) && !ellipse(38778.749329, 20557.985519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39226.923584, 17931.507080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36469.906000, 19200.622000, 1452.184042, 1452.184042, 0.000000, X, Y) && !ellipse(38195.580000, 18830.050000, 1356.344039, 1356.344039, 0.000000, X, Y)
[Wed Aug 22 06:34:42 2012] Writing fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src5.gif
[Wed Aug 22 06:36:09 2012] Mean detx,y = (-8642.14, 14086.17) 
[Wed Aug 22 06:36:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 06:36:24 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 06:36:24 2012] Setting source spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Aug 22 06:36:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Aug 22 07:12:35 2012] Not generating rmf since there are only 30 counts
[Wed Aug 22 07:12:35 2012] rmf not generated due to insufficient counts
[Wed Aug 22 08:17:12 2012] Updating aperture counts using extracted products
[Wed Aug 22 08:17:12 2012] Error reading totcts from fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Aug 22 08:17:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 08:17:14 2012] Using photon index=1.80, rate=0.0799, arf fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src5.arf
[Wed Aug 22 08:17:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 08:17:14 2012] Updating source flux to 7.5e-13
[Wed Aug 22 08:17:40 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Wed Aug 22 08:17:40 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 22 08:18:16 2012] xmm0112231801/analysis//spectral/fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete