[Tue Aug 21 10:47:00 2012] Detection parameters:
  Position = (282.6, 229.0) = 16 40 21.86 46 36 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.4 +/- 12.9
  Background counts = 20.5
  Rate = 0.03 +/- 0.005

[Tue Aug 21 10:47:04 2012] Off-axis axis estimate = 5.16'
[Tue Aug 21 10:51:44 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:44 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Tue Aug 21 10:51:44 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.135
[Tue Aug 21 10:51:44 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.01"
[Tue Aug 21 19:48:06 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src31.ximg exists
[Tue Aug 21 19:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src31.csv
[Tue Aug 21 19:48:06 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Aug 21 19:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src31.csv
[Tue Aug 21 19:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:48:09 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Aug 21 19:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Aug 21 19:48:09 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Aug 21 19:48:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Aug 21 19:48:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:51:25 2012] Warning, spatial fit 31 centroid is now closest to src. 26
[Tue Aug 21 21:51:25 2012] Source 31 is offset by 1.262303 and 3.353038 pixels which is larger than
2 X fitted extent = 1.084032 x 1.084032, not incorporating fit results
[Tue Aug 21 21:51:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:51:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:51:25 2012] Assessing source extent using major
[Tue Aug 21 21:51:25 2012] Source does appear to be extended
[Tue Aug 21 21:51:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 21:51:46 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 21:51:46 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Tue Aug 21 21:51:46 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.135
[Tue Aug 21 21:51:46 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 9.01"
[Wed Aug 22 04:49:35 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src26.ximg exists
[Wed Aug 22 04:49:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src26.csv
[Wed Aug 22 04:49:35 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Aug 22 04:49:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src26.csv
[Wed Aug 22 04:49:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 04:49:37 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Aug 22 04:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Aug 22 04:49:37 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Aug 22 04:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Aug 22 04:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 06:34:22 2012] Source 31 is offset by 4.578119 and 6.797038 pixels which is larger than
2 X fitted extent = 1.035572 x 1.035572, not incorporating fit results
[Wed Aug 22 06:34:22 2012] Source 31 is offset by 1.262303 and 3.353038 pixels which is larger than
2 X fitted extent = 1.084032 x 1.084032, not incorporating fit results
[Wed Aug 22 06:34:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:34:22 2012] Assessing source extent using major
[Wed Aug 22 06:34:22 2012] Source does appear to be extended
[Wed Aug 22 06:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:34:22 2012] Source is confused with source 102
[Wed Aug 22 06:34:43 2012] XMMSAS src. selection expression = ellipse(24536.832336, 19876.702347, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 06:34:43 2012] Writing source region out to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src31_src.reg
[Wed Aug 22 06:34:43 2012] Extracting stamp from image fullrun_pn_xmm0112231801_pi300-10000_cl_sm2.00.img.gz, (245, 192) - (320, 267)
[Wed Aug 22 06:34:43 2012] XMMSAS bgd. selection expression = annulus(24536.832336, 19876.702347, 1087.500000, 2175.000000, X, Y) && !ellipse(24132.606781, 22486.454102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24026.575531, 20929.329865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.869781, 20826.772720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25326.323883, 19740.240479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24475.774628, 18570.672195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24236.322845, 18045.637497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24240.760000, 17012.914000, 858.616025, 858.616025, 0.000000, X, Y) && !ellipse(25273.459595, 20309.773468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.685120, 18136.873596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.210052, 17057.760834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26036.477844, 22761.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25427.613251, 22557.038055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.397797, 22314.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25095.288544, 22051.690399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26314.850000, 21481.546000, 1297.912037, 1297.912037, 0.000000, X, Y) && !ellipse(25823.995850, 21081.415253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.005800, 19636.180000, 1424.616041, 1424.616041, 0.000000, X, Y) && !ellipse(25184.120514, 18746.650192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.784760, 22831.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.588238, 19865.274000, 1416.528041, 1416.528041, 354.780000, X, Y)
[Wed Aug 22 06:34:43 2012] Writing fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src31.gif
[Wed Aug 22 06:44:35 2012] Mean detx,y = (-6938.05, -284.24) 
[Wed Aug 22 06:44:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 06:44:52 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 06:44:52 2012] Setting source spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Aug 22 06:44:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Wed Aug 22 07:22:03 2012] Not generating rmf since there are only 79 counts
[Wed Aug 22 07:22:03 2012] rmf not generated due to insufficient counts
[Wed Aug 22 08:17:12 2012] Updating aperture counts using extracted products
[Wed Aug 22 08:17:12 2012] Error reading totcts from fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Wed Aug 22 08:17:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 08:17:14 2012] Using photon index=1.80, rate=0.0288, arf fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src31.arf
[Wed Aug 22 08:17:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 08:17:14 2012] Updating source flux to 1.1e-13
[Wed Aug 22 08:17:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting