[Tue Aug 21 10:46:59 2012] Detection parameters:
  Position = (277.9, 259.0) = 16 40 23.83 46 38 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 13.5
  Background counts = 16.7
  Rate = 0.03 +/- 0.004

[Tue Aug 21 10:47:04 2012] Off-axis axis estimate = 3.22'
[Tue Aug 21 10:51:44 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:44 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Tue Aug 21 10:51:44 2012] source mask rpix=1.8, npix_max = 22, mask sum = 16, frac = 0.726
[Tue Aug 21 10:51:44 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.04"
[Tue Aug 21 19:48:06 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src19.ximg exists
[Tue Aug 21 19:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src19.csv
[Tue Aug 21 19:48:06 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Aug 21 19:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src19.csv
[Tue Aug 21 19:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:48:09 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Aug 21 19:48:09 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Aug 21 19:48:09 2012] Fit fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Aug 21 21:51:25 2012] Warning, spatial fit 19 centroid is now closest to src. 21
[Tue Aug 21 21:51:25 2012] Source 19 is offset by 0.962855 and 2.496323 pixels which is larger than
2 X fitted extent = 1.152818 x 1.152818, not incorporating fit results
[Tue Aug 21 21:51:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:51:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:51:25 2012] Assessing source extent using major
[Tue Aug 21 21:51:25 2012] Source does appear to be extended
[Tue Aug 21 21:51:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 21:51:25 2012] Source is confused with source 85
[Tue Aug 21 21:51:46 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 21:51:46 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Tue Aug 21 21:51:46 2012] source mask rpix=1.8, npix_max = 22, mask sum = 16, frac = 0.726
[Tue Aug 21 21:51:46 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.04"
[Wed Aug 22 04:49:34 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src17.ximg exists
[Wed Aug 22 04:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src17.csv
[Wed Aug 22 04:49:34 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Aug 22 04:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src17.csv
[Wed Aug 22 04:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 04:49:37 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Aug 22 04:49:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Aug 22 04:49:37 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Aug 22 04:49:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Aug 22 04:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 06:34:22 2012] Warning, spatial fit 17 centroid is now closest to src. 16
[Wed Aug 22 06:34:22 2012] Spatial fit model total counts = 308.098000, observed total counts = 254.000000
[Wed Aug 22 06:34:22 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 22 06:34:22 2012] Source 19 is offset by -1.776796 and -5.638505 pixels which is larger than
2 X fitted extent = 1.994667 x 1.994667, not incorporating fit results
[Wed Aug 22 06:34:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:34:22 2012] Assessing source extent using major
[Wed Aug 22 06:34:22 2012] Source does appear to be extended
[Wed Aug 22 06:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:34:43 2012] XMMSAS src. selection expression = ellipse(24132.606781, 22486.454102, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 06:34:43 2012] Writing source region out to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src19_src.reg
[Wed Aug 22 06:34:43 2012] Extracting stamp from image fullrun_pn_xmm0112231801_pi300-10000_cl_sm2.00.img.gz, (240, 222) - (315, 297)
[Wed Aug 22 06:34:43 2012] XMMSAS bgd. selection expression = annulus(24132.606781, 22486.454102, 1087.500000, 2175.000000, X, Y) && !ellipse(23970.458832, 23543.888550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24026.575531, 20929.329865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.869781, 20826.772720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25326.323883, 19740.240479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24536.832336, 19876.702347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23884.526154, 24051.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25273.459595, 20309.773468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.032440, 25428.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.633698, 23630.115936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.122864, 24198.796661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.531097, 24224.425659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.514496, 23936.437286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.864990, 23699.712219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26036.477844, 22761.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25427.613251, 22557.038055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.397797, 22314.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25095.288544, 22051.690399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26314.850000, 21481.546000, 1297.912037, 1297.912037, 0.000000, X, Y) && !ellipse(25823.995850, 21081.415253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.005800, 19636.180000, 1424.616041, 1424.616041, 0.000000, X, Y) && !ellipse(25848.499115, 24326.620392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.784760, 22831.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.588238, 19865.274000, 1416.528041, 1416.528041, 354.780000, X, Y) && !ellipse(23690.966553, 25454.046722, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 06:34:43 2012] Writing fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src19.gif
[Wed Aug 22 06:41:34 2012] Mean detx,y = (-4434.39, -458.01) 
[Wed Aug 22 06:41:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 06:41:50 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 06:41:51 2012] Setting source spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Aug 22 06:41:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Aug 22 07:20:41 2012] Not generating rmf since there are only 93 counts
[Wed Aug 22 07:20:41 2012] rmf not generated due to insufficient counts
[Wed Aug 22 08:17:12 2012] Updating aperture counts using extracted products
[Wed Aug 22 08:17:12 2012] Error reading totcts from fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Aug 22 08:17:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 08:17:14 2012] Using photon index=1.80, rate=0.0292, arf fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src19.arf
[Wed Aug 22 08:17:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 08:17:14 2012] Updating source flux to 9.6e-14
[Wed Aug 22 08:17:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting