[Tue Aug 21 10:47:03 2012] Detection parameters:
  Position = (297.7, 280.2) = 16 40 15.49 46 40 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.6 +/- 10.5
  Background counts = 28.1
  Rate = 0.01 +/- 0.003

[Tue Aug 21 10:47:04 2012] Off-axis axis estimate = 1.33'
[Tue Aug 21 10:51:44 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:44 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Tue Aug 21 10:51:44 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Tue Aug 21 10:51:44 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 7.09"
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src100.ximg exists
[Tue Aug 21 19:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src100.csv
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src100_1.ximg exists
[Tue Aug 21 19:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src100.csv
[Tue Aug 21 19:48:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:48:11 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Tue Aug 21 19:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src100.csv
[Tue Aug 21 19:48:11 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Tue Aug 21 19:48:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src100.csv
[Tue Aug 21 19:48:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:51:25 2012] Warning, spatial fit 100 centroid is now closest to src. 80
[Tue Aug 21 21:51:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:51:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:51:25 2012] Assessing source extent using major
[Tue Aug 21 21:51:25 2012] Source does appear to be extended
[Tue Aug 21 21:51:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 21:51:25 2012] Source is confused with source 80
[Tue Aug 21 21:51:46 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 21:51:46 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Tue Aug 21 21:51:46 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.882
[Tue Aug 21 21:51:46 2012] Giving source the simple spatial ID 86 for pass 1, mean size = 7.09"
[Wed Aug 22 04:49:36 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src86.ximg exists
[Wed Aug 22 04:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src86.csv
[Wed Aug 22 04:49:36 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src86_1.ximg exists
[Wed Aug 22 04:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src86.csv
[Wed Aug 22 04:49:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 04:49:39 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Wed Aug 22 04:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src86.csv
[Wed Aug 22 04:49:39 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Wed Aug 22 04:49:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src86.csv
[Wed Aug 22 04:49:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 06:34:22 2012] Warning, spatial fit 86 centroid is now closest to src. 80
[Wed Aug 22 06:34:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:34:22 2012] Assessing source extent using major
[Wed Aug 22 06:34:22 2012] Source does appear to be extended
[Wed Aug 22 06:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:34:45 2012] XMMSAS src. selection expression = ellipse(25848.499115, 24326.620392, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 06:34:45 2012] Writing source region out to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src100_src.reg
[Wed Aug 22 06:34:45 2012] Extracting stamp from image fullrun_pn_xmm0112231801_pi300-10000_cl_sm2.00.img.gz, (260, 243) - (335, 318)
[Wed Aug 22 06:34:45 2012] XMMSAS bgd. selection expression = annulus(25848.499115, 24326.620392, 1087.500000, 2175.000000, X, Y) && !ellipse(23970.458832, 23543.888550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24132.606781, 22486.454102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23884.526154, 24051.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24904.946800, 26455.528000, 1064.240031, 1064.240031, 0.000000, X, Y) && !ellipse(24514.410614, 26493.689819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24018.116608, 26479.673920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24176.032440, 25428.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.633698, 23630.115936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.122864, 24198.796661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25357.531097, 24224.425659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.514496, 23936.437286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25564.864990, 23699.712219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26036.477844, 22761.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25427.613251, 22557.038055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.397797, 22314.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25095.288544, 22051.690399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26314.850000, 21481.546000, 1297.912037, 1297.912037, 0.000000, X, Y) && !ellipse(25301.684000, 27092.076000, 2018.080058, 2018.080058, 0.000000, X, Y) && !ellipse(24154.826721, 26913.064972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25134.967957, 26058.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24281.054000, 26087.074000, 1123.440032, 1123.440032, 0.000000, X, Y) && !ellipse(26787.784760, 22831.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23929.908569, 27365.994385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23540.373291, 26247.401337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23690.966553, 25454.046722, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 06:34:45 2012] Writing fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src100.gif
[Wed Aug 22 07:07:57 2012] Mean detx,y = (-2729.86, 1288.16) 
[Wed Aug 22 07:07:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 07:08:19 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 07:08:20 2012] Setting source spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Wed Aug 22 07:08:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Wed Aug 22 07:47:02 2012] Not generating rmf since there are only 46 counts
[Wed Aug 22 07:47:02 2012] rmf not generated due to insufficient counts
[Wed Aug 22 08:17:13 2012] Updating aperture counts using extracted products
[Wed Aug 22 08:17:13 2012] Error reading totcts from fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Wed Aug 22 08:17:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 08:17:16 2012] Using photon index=1.80, rate=0.0147, arf fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src100.arf
[Wed Aug 22 08:17:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 08:17:16 2012] Updating source flux to 4.8e-14
[Wed Aug 22 08:17:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting