[Tue Aug 21 10:46:59 2012] Detection parameters:
  Position = (285.1, 150.9) = 16 40 20.81 46 31 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.2 +/- 15.0
  Background counts = 19.8
  Rate = 0.02 +/- 0.003

[Tue Aug 21 10:47:04 2012] Off-axis axis estimate = 10.74'
[Tue Aug 21 10:51:44 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 10:51:44 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Tue Aug 21 10:51:44 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Tue Aug 21 10:51:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.80"
[Tue Aug 21 19:48:06 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 21 19:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 19:48:06 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 21 19:48:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src1.csv
[Tue Aug 21 19:48:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 21 19:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 21 19:48:08 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 21 19:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 21 19:48:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:51:25 2012] Warning, spatial fit 1 centroid is now closest to src. 54
[Tue Aug 21 21:51:25 2012] Spatial fit model total counts = 214.071000, observed total counts = 171.000000
[Tue Aug 21 21:51:25 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 21 21:51:25 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:51:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:51:25 2012] Assessing source extent using major
[Tue Aug 21 21:51:25 2012] Source does appear to be extended
[Tue Aug 21 21:51:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 21:51:46 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 21:51:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 21:51:46 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Tue Aug 21 21:51:46 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Tue Aug 21 21:51:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.80"
[Wed Aug 22 04:49:34 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 22 04:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 04:49:34 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 22 04:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 04:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 04:49:37 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 22 04:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Aug 22 04:49:37 2012] fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 22 04:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Aug 22 04:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 06:34:22 2012] Warning, spatial fit 1 centroid is now closest to src. 52
[Wed Aug 22 06:34:22 2012] Spatial fit model total counts = 265.017000, observed total counts = 228.000000
[Wed Aug 22 06:34:22 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 22 06:34:22 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:34:22 2012] Assessing source extent using major
[Wed Aug 22 06:34:22 2012] Source does appear to be extended
[Wed Aug 22 06:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:34:42 2012] XMMSAS src. selection expression = ellipse(24751.435699, 13076.166061, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 06:34:42 2012] Writing source region out to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 22 06:34:42 2012] Extracting stamp from image fullrun_pn_xmm0112231801_pi300-10000_cl_sm2.00.img.gz, (248, 113) - (323, 188)
[Wed Aug 22 06:34:42 2012] XMMSAS bgd. selection expression = annulus(24751.435699, 13076.166061, 1087.500000, 2175.000000, X, Y) && !ellipse(24740.071600, 10008.658720, 1199.896035, 1199.896035, 0.000000, X, Y) && !ellipse(25295.828217, 10125.509872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26201.307373, 10048.904312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25118.448364, 15967.174362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25647.253204, 15264.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.407135, 15178.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24339.183990, 15105.335922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26265.774139, 14662.003113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.579987, 14555.707687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25636.431305, 14272.332428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.789825, 14831.952866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25580.564178, 13583.916519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25913.188904, 13080.777847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.978760, 12305.822586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24583.544922, 12036.732712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.829041, 12118.483719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.507660, 11574.823990, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 06:34:42 2012] Writing fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src1.gif
[Wed Aug 22 06:34:49 2012] Mean detx,y = (-13813.59, -520.10) 
[Wed Aug 22 06:34:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 06:35:08 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 06:35:08 2012] Setting source spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 06:35:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 22 07:11:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 07:11:54 2012] rmf not generated due to insufficient counts
[Wed Aug 22 08:17:11 2012] Updating aperture counts using extracted products
[Wed Aug 22 08:17:12 2012] Error reading totcts from fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 22 08:17:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 08:17:14 2012] Using photon index=1.80, rate=0.021, arf fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src1.arf
[Wed Aug 22 08:17:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 08:17:14 2012] Updating source flux to 1.4e-13
[Wed Aug 22 08:17:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 22 08:18:16 2012] xmm0112231801/analysis//spectral/fullrun_pn_xmm0112231801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete