[Tue Aug 21 10:48:29 2012] Detection parameters:
  Position = (301.0, 312.9) = 16 40 14.09 46 42 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218.0 +/- 25.3
  Background counts = 115.1
  Rate = 0.02 +/- 0.002

[Tue Aug 21 10:48:30 2012] Off-axis axis estimate = 1.06'
[Tue Aug 21 20:41:34 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 20:41:34 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Tue Aug 21 20:41:34 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Tue Aug 21 20:41:34 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 6.96"
[Tue Aug 21 21:50:59 2012] fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_src8.ximg exists
[Tue Aug 21 21:50:59 2012] fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Aug 21 21:50:59 2012] Fit fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_src8 appears to have run properly
[Tue Aug 21 21:50:59 2012] fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Aug 21 21:50:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Aug 21 21:50:59 2012] fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Aug 21 21:50:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Aug 21 21:50:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231801_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:51:32 2012] Source 9 is offset by -6.174823 and -2.626581 pixels which is larger than
2 X fitted extent = 0.799917 x 0.799917, not incorporating fit results
[Tue Aug 21 21:51:32 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 21:51:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 21:51:32 2012] Assessing source extent using major
[Tue Aug 21 21:51:32 2012] Source does appear to be extended
[Tue Aug 21 21:51:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 05:37:11 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 05:37:11 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Wed Aug 22 05:37:11 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Wed Aug 22 05:37:11 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 6.96"
[Wed Aug 22 06:34:00 2012] fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_src8.ximg exists
[Wed Aug 22 06:34:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_src8.csv
[Wed Aug 22 06:34:00 2012] fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Aug 22 06:34:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_src8.csv
[Wed Aug 22 06:34:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 06:34:00 2012] fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Aug 22 06:34:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Aug 22 06:34:00 2012] fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Aug 22 06:34:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Aug 22 06:34:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231801_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 06:34:29 2012] Source 9 is offset by -6.210501 and -2.651227 pixels which is larger than
2 X fitted extent = 0.808579 x 0.808579, not incorporating fit results
[Wed Aug 22 06:34:29 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 06:34:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 06:34:29 2012] Assessing source extent using major
[Wed Aug 22 06:34:29 2012] Source does appear to be extended
[Wed Aug 22 06:34:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 06:34:29 2012] Source is confused with source 1
[Wed Aug 22 08:04:40 2012] XMMSAS src. selection expression = ellipse(26138.250427, 27169.532837, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 08:04:40 2012] Writing source region out to fullrun_mos2_xmm0112231801_pi300-10000_pass1_cl_src9_src.reg
[Wed Aug 22 08:04:40 2012] Extracting stamp from image fullrun_mos2_xmm0112231801_pi300-10000_cl_sm2.00.img.gz, (263, 275) - (338, 350)
[Wed Aug 22 08:04:40 2012] XMMSAS bgd. selection expression = annulus(26138.250427, 27169.532837, 1087.500000, 2175.000000, X, Y) && !ellipse(24862.994000, 27004.462000, 2339.328067, 2339.328067, 0.000000, X, Y) && !ellipse(25096.486000, 27058.256000, 1123.152032, 1123.152032, 0.000000, X, Y) && !ellipse(25364.596130, 26404.329498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.962000, 26756.060600, 1160.720033, 1160.720033, 0.000000, X, Y) && !ellipse(24178.616000, 26505.320000, 1169.664034, 1169.664034, 0.000000, X, Y) && !ellipse(24350.636000, 25480.738000, 1154.080033, 1154.080033, 0.000000, X, Y) && !ellipse(23317.287109, 25607.244568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25747.135406, 28042.591431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.646790, 28525.262482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24255.866516, 27987.698700, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 08:04:40 2012] Writing fullrun_mos2_xmm0112231801_pi300-10000_pass1_cl_src9.gif
[Wed Aug 22 08:06:07 2012] Mean detx,y = (-8.69, -1822.36) 
[Wed Aug 22 08:06:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 08:06:15 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 08:06:16 2012] Setting source spectrum file to fullrun_mos2_xmm0112231801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Aug 22 08:06:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112231801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Aug 22 08:15:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 08:15:31 2012] rmf not generated due to insufficient counts
[Wed Aug 22 08:17:17 2012] Updating aperture counts using extracted products
[Wed Aug 22 08:17:17 2012] Error reading totcts from fullrun_mos2_xmm0112231801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Aug 22 08:17:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 08:17:17 2012] Using photon index=1.80, rate=0.0214, arf fullrun_mos2_xmm0112231801_pi300-10000_pass1_cl_src9.arf
[Wed Aug 22 08:17:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 08:17:17 2012] Updating source flux to 2.2e-13
[Wed Aug 22 08:17:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting