[Thu Aug  2 13:35:08 2012] Detection parameters:
  Position = (355.7, 329.1) = 4 12 22.84 10 16 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.4 +/- 13.8
  Background counts = 50.2
  Rate = 0.002 +/- 0.0004

[Thu Aug  2 13:35:08 2012] Off-axis axis estimate = 4.71'
[Thu Aug  2 14:09:50 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 14:09:50 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Thu Aug  2 14:09:50 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Thu Aug  2 14:09:50 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.78"
[Thu Aug  2 14:29:47 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src11.ximg exists
[Thu Aug  2 14:29:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src11.csv
[Thu Aug  2 14:29:47 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Aug  2 14:29:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src11.csv
[Thu Aug  2 14:29:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 14:29:47 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Aug  2 14:29:47 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Aug  2 14:29:47 2012] Fit fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Aug  2 14:29:54 2012] Spatial fit model total counts = 300.283000, observed total counts = 308.000000
[Thu Aug  2 14:29:54 2012] Offset between fit and detection position for source 11 = 0.603323 pixels
[Thu Aug  2 14:29:54 2012] 297.492200 total counts/ 262.712000 bgd. counts: snr = 2.145814
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.603323 pixels
  Position = (355.6, 328.5) = 4 12 22.87 10 16 39.8
  Extent = 4.3 (3.0-6.2)", rotation angle = 0
  Source counts = 34.8 +/- 17.2
  Background counts = 262.7
  Rate = 0.001 +/- 0.0005
[Thu Aug  2 14:29:54 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 14:29:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 14:29:54 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 14:29:54 2012] Source does appear to be extended
[Thu Aug  2 14:29:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 15:00:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 15:00:29 2012] Initial guess for spatial extent in simple fitting = 4.31"
[Thu Aug  2 15:00:29 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.013
[Thu Aug  2 15:00:29 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 4.31"
[Thu Aug  2 15:18:55 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src11.ximg exists
[Thu Aug  2 15:18:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src11.csv
[Thu Aug  2 15:18:55 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Aug  2 15:18:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src11.csv
[Thu Aug  2 15:18:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 15:18:55 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Aug  2 15:18:55 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Aug  2 15:18:55 2012] Fit fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Aug  2 15:19:02 2012] Spatial fit model total counts = 295.457000, observed total counts = 302.000000
[Thu Aug  2 15:19:02 2012] Offset between fit and detection position for source 11 = 0.007328 pixels
[Thu Aug  2 15:19:02 2012] 293.868800 total counts/ 258.754000 bgd. counts: snr = 2.182964
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.007328 pixels
  Position = (355.7, 328.5) = 4 12 22.87 10 16 39.8
  Extent = 4.3 (3.0-6.3)", rotation angle = 0
  Source counts = 35.1 +/- 17.1
  Background counts = 258.8
  Rate = 0.001 +/- 0.0005
[Thu Aug  2 15:19:02 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 15:19:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 15:19:02 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 15:19:02 2012] Source does appear to be extended
[Thu Aug  2 15:19:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 15:55:29 2012] XMMSAS src. selection expression = ellipse(30893.345200, 28530.011800, 259.460407, 259.460407, 0.000000, X, Y)
[Thu Aug  2 15:55:29 2012] Writing source region out to fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src11_src.reg
[Thu Aug  2 15:55:29 2012] Extracting stamp from image fullrun_mos2_xmm0112231601_pi300-10000_cl_sm2.00.img.gz, (341, 314) - (371, 343)
[Thu Aug  2 15:55:29 2012] XMMSAS bgd. selection expression = annulus(30893.345200, 28530.011800, 432.434012, 864.868025, X, Y)
[Thu Aug  2 15:55:29 2012] Writing fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src11.gif
[Thu Aug  2 15:58:51 2012] Mean detx,y = (-3367.21, 1659.97) 
[Thu Aug  2 15:58:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 15:58:59 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 15:58:59 2012] Setting source spectrum file to fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Aug  2 15:58:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Aug  2 16:08:00 2012] Not generating rmf since there are only 35 counts
[Thu Aug  2 16:08:00 2012] rmf not generated due to insufficient counts
[Thu Aug  2 16:09:23 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:09:23 2012] Error reading totcts from fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Aug  2 16:09:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:09:23 2012] Using photon index=1.80, rate=0.00108, arf fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src11.arf
[Thu Aug  2 16:09:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:09:23 2012] Updating source flux to 1.7e-14
[Thu Aug  2 16:09:46 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting