[Thu Aug  2 13:35:08 2012] Detection parameters:
  Position = (309.9, 310.5) = 4 12 36.34 10 15 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 401.3 +/- 26.5
  Background counts = 49.6
  Rate = 0.01 +/- 0.0008

[Thu Aug  2 13:35:08 2012] Off-axis axis estimate = 1.21'
[Thu Aug  2 14:09:50 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 14:09:50 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Thu Aug  2 14:09:50 2012] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.781
[Thu Aug  2 14:09:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.03"
[Thu Aug  2 14:29:47 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 14:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 14:29:47 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 14:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src1.csv
[Thu Aug  2 14:29:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 14:29:47 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 14:29:47 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 14:29:47 2012] Fit fullrun_mos2_xmm0112231601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  2 14:29:54 2012] Spatial fit model total counts = 507.958000, observed total counts = 515.000000
[Thu Aug  2 14:29:54 2012] Offset between fit and detection position for source 1 = 0.728447 pixels
[Thu Aug  2 14:29:54 2012] 512.014000 total counts/ 304.110000 bgd. counts: snr = 11.921955
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.728447 pixels
  Position = (309.7, 309.8) = 4 12 36.42 10 15 18.5
  Extent = 5.8 (4.9-6.9)", rotation angle = 0
  Source counts = 207.9 +/- 22.6
  Background counts = 304.1
  Rate = 0.006 +/- 0.0007
[Thu Aug  2 14:29:54 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 14:29:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 14:29:54 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 14:29:54 2012] Source does appear to be extended
[Thu Aug  2 14:29:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 15:00:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 15:00:29 2012] Initial guess for spatial extent in simple fitting = 5.79"
[Thu Aug  2 15:00:29 2012] source mask rpix=1.3, npix_max = 13, mask sum = 8, frac = 0.597
[Thu Aug  2 15:00:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.79"
[Thu Aug  2 15:18:54 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  2 15:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 15:18:54 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  2 15:18:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src1.csv
[Thu Aug  2 15:18:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 15:18:55 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  2 15:18:55 2012] fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  2 15:18:55 2012] Fit fullrun_mos2_xmm0112231601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  2 15:19:02 2012] Spatial fit model total counts = 510.007000, observed total counts = 515.000000
[Thu Aug  2 15:19:02 2012] Offset between fit and detection position for source 1 = 0.013449 pixels
[Thu Aug  2 15:19:02 2012] 514.890000 total counts/ 308.335000 bgd. counts: snr = 11.763168
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013449 pixels
  Position = (309.6, 309.8) = 4 12 36.43 10 15 18.5
  Extent = 5.7 (4.8-6.8)", rotation angle = 0
  Source counts = 206.6 +/- 22.7
  Background counts = 308.3
  Rate = 0.006 +/- 0.0007
[Thu Aug  2 15:19:02 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 15:19:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 15:19:02 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 15:19:02 2012] Source does appear to be extended
[Thu Aug  2 15:19:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 15:55:29 2012] XMMSAS src. selection expression = ellipse(26890.707400, 26903.368800, 344.427010, 344.427010, 0.000000, X, Y)
[Thu Aug  2 15:55:29 2012] Writing source region out to fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug  2 15:55:29 2012] Extracting stamp from image fullrun_mos2_xmm0112231601_pi300-10000_cl_sm2.00.img.gz, (290, 290) - (329, 330)
[Thu Aug  2 15:55:29 2012] XMMSAS bgd. selection expression = annulus(26890.707400, 26903.368800, 574.045017, 1148.090033, X, Y)
[Thu Aug  2 15:55:29 2012] Writing fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1.gif
[Thu Aug  2 15:55:32 2012] Mean detx,y = (356.72, -503.14) 
[Thu Aug  2 15:55:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 15:55:42 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 15:55:42 2012] Setting source spectrum file to fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 15:55:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  2 16:09:23 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:09:23 2012] Error reading totcts from fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 16:09:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:09:23 2012] Using photon index=1.80, rate=0.00638, arf fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 16:09:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:09:23 2012] Updating source flux to 8e-14
[Thu Aug  2 16:09:56 2012] Reading fit data from xmm0112231601/analysis//spectral/fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug  2 16:09:56 2012] Spectral fit parameter nH value = 2.69664e+21
[Thu Aug  2 16:09:56 2012] Spectral fit parameter PhoIndex value = 2.17565
[Thu Aug  2 16:09:56 2012] Failed to get F(0.3-8.0) from xmm0112231601/analysis//spectral/fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 16:09:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:09:56 2012] Using Nh = 2.7e+21, photon index=2.18, rate=0.00638, arf fullrun_mos2_xmm0112231601_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 16:09:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:09:56 2012] Updating source flux to 8.5e-14