[Tue Jul 17 10:18:17 2012] Detection parameters:
  Position = (304.9, 320.9) = 16 15 46.48 -6 8 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1120.0 +/- 46.5
  Background counts = 109.2
  Rate = 0.2 +/- 0.007

[Tue Jul 17 10:18:18 2012] Off-axis axis estimate = 1.70'
[Tue Jul 17 10:21:12 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 10:21:12 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jul 17 10:21:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Jul 17 10:21:12 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.28"
[Tue Jul 17 11:43:54 2012] fullrun_pn_xmm0112231501_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul 17 11:43:54 2012] fullrun_pn_xmm0112231501_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul 17 11:43:54 2012] Fit fullrun_pn_xmm0112231501_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue Jul 17 11:43:55 2012] fullrun_pn_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul 17 11:43:55 2012] fullrun_pn_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul 17 11:43:55 2012] Fit fullrun_pn_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jul 17 14:08:11 2012] Spatial fit model total counts = 5477.390000, observed total counts = 5314.000000
[Tue Jul 17 14:08:11 2012] Offset between fit and detection position for source 2 = 4.961092 pixels
[Tue Jul 17 14:08:11 2012] 5564.665000 total counts/ 5203.420000 bgd. counts: snr = 5.007920
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.961092 pixels
  Position = (300.1, 322.1) = 16 15 47.89 -6 8 52.0
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source counts = 361.2 +/- 74.6
  Background counts = 5203.4
  Rate = 0.06 +/- 0.01
[Tue Jul 17 14:08:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 14:08:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 14:08:11 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 14:08:11 2012] Source does appear to be extended
[Tue Jul 17 14:08:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 14:08:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 14:08:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 14:08:27 2012] Initial guess for spatial extent in simple fitting = 14.56"
[Tue Jul 17 14:08:27 2012] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.082
[Tue Jul 17 14:08:27 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 14.56"
[Tue Jul 17 14:59:46 2012] fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jul 17 14:59:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_src2.csv
[Tue Jul 17 14:59:47 2012] fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jul 17 14:59:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_src2.csv
[Tue Jul 17 14:59:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 14:59:47 2012] fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jul 17 14:59:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jul 17 14:59:47 2012] fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jul 17 14:59:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jul 17 14:59:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 17:50:41 2012] Warning, spatial fit 2 centroid is now closest to src. 16
[Tue Jul 17 17:50:41 2012] Source 2 is offset by 4.055793 and -3.843393 pixels which is larger than
2 X fitted extent = 2.358285 x 2.358285, not incorporating fit results
[Tue Jul 17 17:50:41 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 17:50:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 17:50:41 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 17:50:41 2012] Source does appear to be extended
[Tue Jul 17 17:50:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 17:50:41 2012] Source is confused with source 3
[Tue Jul 17 17:50:56 2012] XMMSAS src. selection expression = ellipse(26059.640000, 27973.134800, 873.342025, 873.342025, 0.000000, X, Y)
[Tue Jul 17 17:50:56 2012] Writing source region out to fullrun_pn_xmm0112231501_pi300-10000_pass1_cl_src2_src.reg
[Tue Jul 17 17:50:56 2012] Extracting stamp from image fullrun_pn_xmm0112231501_pi300-10000_cl_sm2.00.img.gz, (250, 272) - (350, 372)
[Tue Jul 17 17:50:56 2012] XMMSAS bgd. selection expression = annulus(26059.640000, 27973.134800, 1455.570042, 2911.140084, X, Y) && !ellipse(26763.738000, 27127.064000, 891.640026, 891.640026, 0.000000, X, Y) && !ellipse(26913.318000, 27448.090400, 2314.880067, 2314.880067, 0.000000, X, Y) && !ellipse(27117.316200, 27850.046400, 1181.152034, 1181.152034, 0.000000, X, Y) && !ellipse(25784.704071, 28951.676117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.981995, 29052.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26358.588654, 30131.289703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25254.744293, 28863.454803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29110.850433, 28481.011108, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 17:50:56 2012] Writing fullrun_pn_xmm0112231501_pi300-10000_pass1_cl_src2.gif
[Tue Jul 17 17:51:26 2012] Mean detx,y = (-424.30, -407.40) 
[Tue Jul 17 17:51:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 17:52:04 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 17:52:05 2012] Setting source spectrum file to fullrun_pn_xmm0112231501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 17 17:52:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112231501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 18 16:01:04 2012] Updating aperture counts using extracted products
[Wed Jul 18 16:01:04 2012] Error reading totcts from fullrun_pn_xmm0112231501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 18 16:01:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 16:01:04 2012] Using photon index=1.80, rate=0.0615, arf fullrun_pn_xmm0112231501_pi300-10000_pass1_cl_src2.arf
[Wed Jul 18 16:01:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 16:01:04 2012] Updating source flux to 1.5e-13
[Wed Jul 18 16:05:10 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Wed Jul 18 16:05:10 2012] Flag c found in src. 2 procflags, skipping spectral fitting