[Tue Jul 17 10:19:11 2012] Detection parameters:
  Position = (308.2, 319.0) = 16 15 45.52 -6 9 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 801.1 +/- 39.2
  Background counts = 94.2
  Rate = 0.07 +/- 0.003

[Tue Jul 17 10:19:12 2012] Off-axis axis estimate = 1.65'
[Tue Jul 17 12:59:42 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 12:59:42 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jul 17 12:59:42 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Tue Jul 17 12:59:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Jul 17 14:08:03 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 17 14:08:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 14:08:03 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 17 14:08:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src1.csv
[Tue Jul 17 14:08:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 14:08:04 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 17 14:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 17 14:08:04 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 17 14:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 17 14:08:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 14:08:19 2012] Spatial fit model total counts = 3395.410000, observed total counts = 3080.000000
[Tue Jul 17 14:08:19 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 14:08:19 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 14:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 14:08:19 2012] Assessing source extent using major
[Tue Jul 17 14:08:19 2012] Source does appear to be extended
[Tue Jul 17 14:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 14:08:20 2012] Source is confused with source 2
[Tue Jul 17 16:28:15 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:28:15 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jul 17 16:28:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Tue Jul 17 16:28:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.25"
[Tue Jul 17 17:50:35 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 17 17:50:35 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 17 17:50:35 2012] Fit fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jul 17 17:50:36 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 17 17:50:36 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 17 17:50:36 2012] Fit fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 17 17:50:49 2012] Spatial fit model total counts = 3383.270000, observed total counts = 3080.000000
[Tue Jul 17 17:50:49 2012] Offset between fit and detection position for source 5 = 2.726022 pixels
[Tue Jul 17 17:50:49 2012] 3401.936000 total counts/ 3104.250000 bgd. counts: snr = 5.342937
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.726022 pixels
  Position = (305.8, 320.2) = 16 15 46.24 -6 9 0.3
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 297.7 +/- 58.3
  Background counts = 3104.2
  Rate = 0.03 +/- 0.007
[Tue Jul 17 17:50:49 2012] Spatial fit model total counts = 4461.840000, observed total counts = 4464.000000
[Tue Jul 17 17:50:49 2012] Offset between fit and detection position for source 5 = 0.592959 pixels
[Tue Jul 17 17:50:49 2012] Warning, changing simple spatial fit ID from 1 to 3
[Tue Jul 17 17:50:49 2012] 4212.740000 total counts/ 3379.880000 bgd. counts: snr = 14.325882
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.592959 pixels
  Position = (306.2, 320.5) = 16 15 46.09 -6 8 58.9
  Extent = 28.8 (27.0-29.7)", rotation angle = 0
  Source counts = 832.9 +/- 64.9
  Background counts = 3379.9
  Rate = 0.1 +/- 0.007
[Tue Jul 17 17:50:49 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 17:50:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 17:50:49 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 17:50:49 2012] Source does appear to be extended
[Tue Jul 17 17:50:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 12:50:51 2012] XMMSAS src. selection expression = ellipse(26595.098000, 27835.608000, 1727.346050, 1727.346050, 0.000000, X, Y)
[Wed Jul 18 12:50:51 2012] Writing source region out to fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5_src.reg
[Wed Jul 18 12:50:51 2012] Extracting stamp from image fullrun_mos2_xmm0112231501_pi300-10000_cl_sm2.00.img.gz, (207, 221) - (406, 420)
[Wed Jul 18 12:50:51 2012] XMMSAS bgd. selection expression = annulus(26595.098000, 27835.608000, 2878.910083, 5757.820166, X, Y) && !ellipse(27853.906000, 28213.838000, 1262.312036, 1262.312036, 0.000000, X, Y) && !ellipse(26151.388000, 27947.738000, 2332.976067, 1448.624042, 202.152000, X, Y) && !ellipse(25877.698000, 28095.627600, 1166.488034, 1166.488034, 0.000000, X, Y) && !ellipse(25454.978740, 28903.615800, 1161.448033, 1161.448033, 0.000000, X, Y) && !ellipse(27289.824249, 29104.611115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.997345, 27815.302338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28831.944916, 28218.861481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26961.386000, 26533.614000, 1138.232033, 1138.232033, 0.000000, X, Y) && !ellipse(23932.412000, 35997.059660, 3392.896098, 3392.896098, 0.000000, X, Y) && !ellipse(24947.012000, 29675.586000, 2319.632067, 2319.632067, 0.000000, X, Y) && !ellipse(27560.154022, 25888.900696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28826.214000, 29260.612000, 1353.840039, 1353.840039, 0.000000, X, Y) && !ellipse(29240.867218, 29023.916809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29710.664000, 30049.044000, 2707.680078, 2707.680078, 0.000000, X, Y)
[Wed Jul 18 12:50:51 2012] Writing fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5.gif
[Wed Jul 18 12:50:55 2012] Mean detx,y = (146.14, 134.83) 
[Wed Jul 18 12:50:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 12:51:15 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 12:51:16 2012] Setting source spectrum file to fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 18 12:51:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jul 18 16:01:07 2012] Updating aperture counts using extracted products
[Wed Jul 18 16:01:07 2012] Error reading totcts from fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 18 16:01:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 16:01:08 2012] Using photon index=1.80, rate=0.0959, arf fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5.arf
[Wed Jul 18 16:01:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 16:01:08 2012] Updating source flux to 8.3e-13
[Wed Jul 18 16:02:53 2012] Flag p found in src. 5 procflags, skipping spectral fitting
[Wed Jul 18 16:02:53 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Wed Jul 18 16:05:10 2012] Reading fit data from xmm0112231501/analysis//spectral/fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5_pl.csv
[Wed Jul 18 16:05:10 2012] Spectral fit parameter nH value = 2.27531e+21
[Wed Jul 18 16:05:10 2012] Spectral fit parameter PhoIndex value = 1.7059
[Wed Jul 18 16:05:10 2012] Failed to get F(0.3-8.0) from xmm0112231501/analysis//spectral/fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Jul 18 16:05:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 16:05:10 2012] Using Nh = 2.3e+21, photon index=1.71, rate=0.0959, arf fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src5.arf
[Wed Jul 18 16:05:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 16:05:10 2012] Updating source flux to 1.1e-12