[Tue Jul 17 10:19:11 2012] Detection parameters:
  Position = (285.5, 320.3) = 16 15 52.14 -6 8 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.1 +/- 19.0
  Background counts = 102.0
  Rate = 0.01 +/- 0.002

[Tue Jul 17 10:19:12 2012] Off-axis axis estimate = 1.84'
[Tue Jul 17 12:59:42 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 12:59:42 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Tue Jul 17 12:59:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Tue Jul 17 12:59:42 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.35"
[Tue Jul 17 14:08:04 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jul 17 14:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src9.csv
[Tue Jul 17 14:08:04 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jul 17 14:08:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src9.csv
[Tue Jul 17 14:08:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 14:08:04 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jul 17 14:08:04 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jul 17 14:08:04 2012] Fit fullrun_mos2_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jul 17 14:08:19 2012] Source 12 is offset by -4.597203 and -2.674729 pixels which is larger than
2 X fitted extent = 3.028515 x 3.028515, not incorporating fit results
[Tue Jul 17 14:08:19 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 14:08:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 14:08:19 2012] Assessing source extent using major
[Tue Jul 17 14:08:19 2012] Source does appear to be extended
[Tue Jul 17 14:08:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 16:28:15 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 16:28:15 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Tue Jul 17 16:28:15 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Tue Jul 17 16:28:15 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.35"
[Tue Jul 17 17:50:36 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jul 17 17:50:36 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jul 17 17:50:36 2012] Fit fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_src7 appears to have run properly
[Tue Jul 17 17:50:36 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jul 17 17:50:36 2012] fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jul 17 17:50:36 2012] Fit fullrun_mos2_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jul 17 17:50:49 2012] Source 12 is offset by -4.422168 and -2.808460 pixels which is larger than
2 X fitted extent = 3.002602 x 3.002602, not incorporating fit results
[Tue Jul 17 17:50:49 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 17:50:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 17:50:49 2012] Assessing source extent using major
[Tue Jul 17 17:50:49 2012] Source does appear to be extended
[Tue Jul 17 17:50:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 17:50:49 2012] Source is confused with source 2
[Wed Jul 18 12:50:52 2012] XMMSAS src. selection expression = ellipse(24789.997345, 27815.302338, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 12:50:52 2012] Writing source region out to fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src12_src.reg
[Wed Jul 18 12:50:52 2012] Extracting stamp from image fullrun_mos2_xmm0112231501_pi300-10000_cl_sm2.00.img.gz, (248, 283) - (323, 358)
[Wed Jul 18 12:50:52 2012] XMMSAS bgd. selection expression = annulus(24789.997345, 27815.302338, 1087.500000, 2175.000000, X, Y) && !ellipse(26595.098000, 27835.608000, 2303.128066, 2303.128066, 0.000000, X, Y) && !ellipse(27853.906000, 28213.838000, 1262.312036, 1262.312036, 0.000000, X, Y) && !ellipse(26151.388000, 27947.738000, 2332.976067, 1448.624042, 202.152000, X, Y) && !ellipse(25877.698000, 28095.627600, 1166.488034, 1166.488034, 0.000000, X, Y) && !ellipse(25454.978740, 28903.615800, 1161.448033, 1161.448033, 0.000000, X, Y) && !ellipse(27289.824249, 29104.611115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26961.386000, 26533.614000, 1138.232033, 1138.232033, 0.000000, X, Y) && !ellipse(24947.012000, 29675.586000, 2319.632067, 2319.632067, 0.000000, X, Y) && !ellipse(27560.154022, 25888.900696, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 12:50:52 2012] Writing fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src12.gif
[Wed Jul 18 12:52:34 2012] Mean detx,y = (1795.98, 457.46) 
[Wed Jul 18 12:52:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 12:52:43 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 12:52:43 2012] Setting source spectrum file to fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 18 12:52:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jul 18 13:41:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 13:41:34 2012] rmf not generated due to insufficient counts
[Wed Jul 18 16:01:07 2012] Updating aperture counts using extracted products
[Wed Jul 18 16:01:08 2012] Error reading totcts from fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 18 16:01:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 16:01:08 2012] Using photon index=1.80, rate=0.0136, arf fullrun_mos2_xmm0112231501_pi300-10000_pass1_cl_src12.arf
[Wed Jul 18 16:01:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 16:01:09 2012] Updating source flux to 1.5e-13
[Wed Jul 18 16:02:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting