[Tue Jul 17 10:18:45 2012] Detection parameters:
  Position = (299.0, 412.0) = 16 15 48.22 -6 2 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.7 +/- 17.4
  Background counts = 38.4
  Rate = 0.02 +/- 0.002

[Tue Jul 17 10:18:46 2012] Off-axis axis estimate = 8.23'
[Tue Jul 17 11:43:55 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 11:43:55 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Tue Jul 17 11:43:55 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.053
[Tue Jul 17 11:43:55 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.54"
[Tue Jul 17 12:59:42 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jul 17 12:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src11.csv
[Tue Jul 17 12:59:42 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jul 17 12:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src11.csv
[Tue Jul 17 12:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 12:59:42 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jul 17 12:59:42 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jul 17 12:59:42 2012] Fit fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jul 17 14:08:15 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.490836 pixels away
[Tue Jul 17 14:08:15 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 14:08:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 14:08:15 2012] Assessing source extent using major
[Tue Jul 17 14:08:15 2012] Source does appear to be extended
[Tue Jul 17 14:08:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 14:08:15 2012] Source is confused with source 15
[Tue Jul 17 14:59:47 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 14:59:47 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Tue Jul 17 14:59:47 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.053
[Tue Jul 17 14:59:47 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.54"
[Tue Jul 17 16:28:15 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jul 17 16:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src11.csv
[Tue Jul 17 16:28:15 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jul 17 16:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src11.csv
[Tue Jul 17 16:28:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 16:28:15 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jul 17 16:28:15 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jul 17 16:28:15 2012] Fit fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jul 17 17:50:46 2012] Spatial fit model total counts = 395.855000, observed total counts = 397.000000
[Tue Jul 17 17:50:46 2012] Offset between fit and detection position for source 7 = 0.820463 pixels
[Tue Jul 17 17:50:46 2012] 333.894000 total counts/ 221.015000 bgd. counts: snr = 7.592806
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.820463 pixels
  Position = (298.2, 412.3) = 16 15 48.44 -6 2 19.6
  Extent = 10.9 (7.8-17.0)", rotation angle = 0
  Source counts = 112.9 +/- 18.3
  Background counts = 221.0
  Rate = 0.01 +/- 0.002
[Tue Jul 17 17:50:46 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 17:50:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 17:50:46 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 17:50:46 2012] Source does appear to be extended
[Tue Jul 17 17:50:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:19:24 2012] XMMSAS src. selection expression = ellipse(25895.513600, 35820.769000, 654.582019, 654.582019, 0.000000, X, Y)
[Wed Jul 18 10:19:24 2012] Writing source region out to fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src7_src.reg
[Wed Jul 18 10:19:24 2012] Extracting stamp from image fullrun_mos1_xmm0112231501_pi300-10000_cl_sm2.00.img.gz, (261, 375) - (336, 450)
[Wed Jul 18 10:19:24 2012] XMMSAS bgd. selection expression = annulus(25895.513600, 35820.769000, 1090.970031, 2181.940063, X, Y) && !ellipse(26357.614258, 38054.983032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25522.480600, 35772.246400, 1317.752038, 1317.752038, 0.000000, X, Y)
[Wed Jul 18 10:19:24 2012] Writing fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src7.gif
[Wed Jul 18 10:35:05 2012] Mean detx,y = (8284.85, 620.37) 
[Wed Jul 18 10:35:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 10:35:41 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 10:35:41 2012] Setting source spectrum file to fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 18 10:35:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jul 18 16:01:06 2012] Updating aperture counts using extracted products
[Wed Jul 18 16:01:06 2012] Error reading totcts from fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 18 16:01:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 16:01:07 2012] Using photon index=1.80, rate=0.013, arf fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src7.arf
[Wed Jul 18 16:01:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 16:01:07 2012] Updating source flux to 1.8e-13
[Wed Jul 18 16:01:10 2012] Flag c found in src. 7 procflags, skipping spectral fitting