[Tue Jul 17 10:18:45 2012] Detection parameters:
  Position = (289.8, 337.5) = 16 15 50.90 -6 7 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.4 +/- 21.0
  Background counts = 87.6
  Rate = 0.01 +/- 0.002

[Tue Jul 17 10:18:46 2012] Off-axis axis estimate = 2.90'
[Tue Jul 17 11:43:55 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 11:43:55 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Tue Jul 17 11:43:55 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.983
[Tue Jul 17 11:43:55 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.88"
[Tue Jul 17 12:59:42 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jul 17 12:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src12.csv
[Tue Jul 17 12:59:42 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jul 17 12:59:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src12.csv
[Tue Jul 17 12:59:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 12:59:42 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jul 17 12:59:42 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jul 17 12:59:42 2012] Fit fullrun_mos1_xmm0112231501_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Jul 17 14:08:15 2012] Warning, spatial fit 12 centroid is now closest to src. 11
[Tue Jul 17 14:08:15 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 14:08:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 14:08:15 2012] Assessing source extent using major
[Tue Jul 17 14:08:15 2012] Source does appear to be extended
[Tue Jul 17 14:08:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 14:08:15 2012] Source is confused with source 11
[Tue Jul 17 14:59:47 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 14:59:47 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Tue Jul 17 14:59:47 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.983
[Tue Jul 17 14:59:47 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.88"
[Tue Jul 17 16:28:15 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jul 17 16:28:15 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jul 17 16:28:15 2012] Fit fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_src12 appears to have run properly
[Tue Jul 17 16:28:15 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jul 17 16:28:15 2012] fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jul 17 16:28:15 2012] Fit fullrun_mos1_xmm0112231501_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jul 17 17:50:46 2012] Source 12 is offset by 5.117995 and -8.008635 pixels which is larger than
2 X fitted extent = 1.810998 x 1.810998, not incorporating fit results
[Tue Jul 17 17:50:46 2012] Warning, spatial fit 12 centroid is now closest to src. 11
[Tue Jul 17 17:50:46 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 17:50:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 17:50:46 2012] Assessing source extent using major
[Tue Jul 17 17:50:46 2012] Source does appear to be extended
[Tue Jul 17 17:50:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 10:19:24 2012] XMMSAS src. selection expression = ellipse(25161.531525, 29311.084778, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 10:19:24 2012] Writing source region out to fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src12_src.reg
[Wed Jul 18 10:19:24 2012] Extracting stamp from image fullrun_mos1_xmm0112231501_pi300-10000_cl_sm2.00.img.gz, (252, 300) - (327, 375)
[Wed Jul 18 10:19:24 2012] XMMSAS bgd. selection expression = annulus(25161.531525, 29311.084778, 1087.500000, 2175.000000, X, Y) && !ellipse(26181.012600, 28148.085600, 1167.720034, 1167.720034, 0.000000, X, Y) && !ellipse(27476.453600, 27734.437200, 1182.648034, 1182.648034, 0.000000, X, Y) && !ellipse(26607.990000, 27819.390000, 2335.440067, 2335.440067, 0.000000, X, Y) && !ellipse(25848.807600, 27965.769800, 1171.024034, 1171.024034, 0.000000, X, Y) && !ellipse(27198.257560, 27420.442000, 1153.368033, 1153.368033, 0.000000, X, Y) && !ellipse(25525.796000, 28727.272000, 1260.456036, 1260.456036, 0.000000, X, Y) && !ellipse(26019.605133, 29599.017395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.954041, 29704.828278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24572.882324, 27809.296661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25114.279968, 27111.310699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27480.043823, 29832.142242, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 10:19:24 2012] Writing fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src12.gif
[Wed Jul 18 10:35:48 2012] Mean detx,y = (2003.36, -1359.15) 
[Wed Jul 18 10:35:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 10:36:10 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 10:36:10 2012] Setting source spectrum file to fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 18 10:36:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jul 18 12:46:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 12:46:41 2012] rmf not generated due to insufficient counts
[Wed Jul 18 16:01:06 2012] Updating aperture counts using extracted products
[Wed Jul 18 16:01:07 2012] Error reading totcts from fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 18 16:01:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 16:01:07 2012] Using photon index=1.80, rate=0.013, arf fullrun_mos1_xmm0112231501_pi300-10000_pass1_cl_src12.arf
[Wed Jul 18 16:01:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 16:01:07 2012] Updating source flux to 1.4e-13
[Wed Jul 18 16:01:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting