[Sun Aug 12 09:07:07 2012] Detection parameters:
  Position = (229.7, 232.5) = 16 16 8.82 -6 33 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.0 +/- 8.9
  Background counts = 8.8
  Rate = 0.003 +/- 0.0006

[Sun Aug 12 09:07:07 2012] Off-axis axis estimate = 6.90'
[Sun Aug 12 10:24:29 2012] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 10:24:29 2012] Initial guess for spatial extent in simple fitting = 9.88"
[Sun Aug 12 10:24:29 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.814
[Sun Aug 12 10:24:29 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.88"
[Sun Aug 12 11:06:36 2012] fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_src7.ximg exists
[Sun Aug 12 11:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_src7.csv
[Sun Aug 12 11:06:36 2012] fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Aug 12 11:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_src7.csv
[Sun Aug 12 11:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 11:06:37 2012] fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Aug 12 11:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Aug 12 11:06:37 2012] fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Aug 12 11:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Aug 12 11:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112231001_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 11:06:58 2012] Warning, spatial fit 7 centroid is now closest to src. 15
[Sun Aug 12 11:06:58 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 11:06:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 11:06:58 2012] Assessing source extent using major
[Sun Aug 12 11:06:58 2012] Source does appear to be extended
[Sun Aug 12 11:06:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 12:38:32 2012] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 12:38:32 2012] Initial guess for spatial extent in simple fitting = 9.88"
[Sun Aug 12 12:38:32 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.814
[Sun Aug 12 12:38:32 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.88"
[Sun Aug 12 13:12:55 2012] fullrun_mos2_xmm0112231001_pi300-10000_cl_pass1_src7.ximg exists
[Sun Aug 12 13:12:55 2012] fullrun_mos2_xmm0112231001_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Aug 12 13:12:55 2012] Fit fullrun_mos2_xmm0112231001_pi300-10000_cl_pass1_src7 appears to have run properly
[Sun Aug 12 13:12:56 2012] fullrun_mos2_xmm0112231001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Aug 12 13:12:56 2012] fullrun_mos2_xmm0112231001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Aug 12 13:12:56 2012] Fit fullrun_mos2_xmm0112231001_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Aug 12 13:13:17 2012] Spatial fit model total counts = 159.545000, observed total counts = 157.000000
[Sun Aug 12 13:13:17 2012] Offset between fit and detection position for source 16 = 1.433003 pixels
[Sun Aug 12 13:13:17 2012] 161.306400 total counts/ 113.674000 bgd. counts: snr = 4.467575
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.433003 pixels
  Position = (231.0, 231.9) = 16 16 8.44 -6 33 24.2
  Extent = 10.2 (4.2-16.2)", rotation angle = 0
  Source counts = 47.6 +/- 12.7
  Background counts = 113.7
  Rate = 0.002 +/- 0.0005
[Sun Aug 12 13:13:17 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 13:13:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 13:13:17 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 13:13:17 2012] Source does appear to be extended
[Sun Aug 12 13:13:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 14:02:56 2012] XMMSAS src. selection expression = ellipse(20049.321600, 20129.523000, 613.716018, 613.716018, 0.000000, X, Y)
[Sun Aug 12 14:02:56 2012] Writing source region out to fullrun_mos2_xmm0112231001_pi300-10000_pass1_cl_src16_src.reg
[Sun Aug 12 14:02:56 2012] Extracting stamp from image fullrun_mos2_xmm0112231001_pi300-10000_cl_sm2.00.img.gz, (196, 197) - (266, 267)
[Sun Aug 12 14:02:56 2012] XMMSAS bgd. selection expression = annulus(20049.321600, 20129.523000, 1022.860029, 2045.720059, X, Y) && !ellipse(18869.899800, 20903.637640, 335.145610, 335.145610, 0.000000, X, Y)
[Sun Aug 12 14:02:56 2012] Writing fullrun_mos2_xmm0112231001_pi300-10000_pass1_cl_src16.gif
[Sun Aug 12 14:04:49 2012] Mean detx,y = (7929.01, -6346.68) 
[Sun Aug 12 14:04:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 14:05:28 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 14:05:28 2012] Setting source spectrum file to fullrun_mos2_xmm0112231001_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Aug 12 14:05:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112231001_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Aug 12 14:15:19 2012] Not generating rmf since there are only 47 counts
[Sun Aug 12 14:15:19 2012] rmf not generated due to insufficient counts
[Sun Aug 12 14:21:49 2012] Updating aperture counts using extracted products
[Sun Aug 12 14:21:49 2012] Error reading totcts from fullrun_mos2_xmm0112231001_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Aug 12 14:21:50 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 14:21:50 2012] Using photon index=1.80, rate=0.00169, arf fullrun_mos2_xmm0112231001_pi300-10000_pass1_cl_src16.arf
[Sun Aug 12 14:21:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 14:21:50 2012] Updating source flux to 3e-14
[Sun Aug 12 14:22:22 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting