[Mon Feb 13 11:47:09 2012] Detection parameters:
  Position = (469.5, 305.2) = 16 16 0.43 -6 10 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.8 +/- 16.9
  Background counts = 93.6
  Rate = 0.003 +/- 0.0007

[Mon Feb 13 11:47:09 2012] Off-axis axis estimate = 12.41'
[Mon Feb 13 11:49:24 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 11:49:24 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Mon Feb 13 11:49:24 2012] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.035
[Mon Feb 13 11:49:24 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.64"
[Mon Feb 13 12:11:18 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src13.ximg exists
[Mon Feb 13 12:11:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src13.csv
[Mon Feb 13 12:11:18 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Feb 13 12:11:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src13.csv
[Mon Feb 13 12:11:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 12:11:18 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Feb 13 12:11:18 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Feb 13 12:11:18 2012] Fit fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Feb 13 12:58:16 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 16.232744 pixels away
[Mon Feb 13 12:58:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 12:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 12:58:16 2012] Assessing source extent using major
[Mon Feb 13 12:58:16 2012] Source does appear to be extended
[Mon Feb 13 12:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 12:58:27 2012] Using EEF radius (= 12.64 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 12:58:27 2012] Initial guess for spatial extent in simple fitting = 12.64"
[Mon Feb 13 12:58:27 2012] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.035
[Mon Feb 13 12:58:27 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.64"
[Mon Feb 13 13:31:00 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src12.ximg exists
[Mon Feb 13 13:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src12.csv
[Mon Feb 13 13:31:00 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Feb 13 13:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src12.csv
[Mon Feb 13 13:31:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 13:31:00 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Feb 13 13:31:00 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Feb 13 13:31:01 2012] Fit fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Feb 13 14:15:44 2012] Spatial fit model total counts = 2129.980000, observed total counts = 2225.000000
[Mon Feb 13 14:15:44 2012] Offset between fit and detection position for source 15 = 7.858472 pixels
[Mon Feb 13 14:15:44 2012] Warning, changing simple spatial fit ID from 12 to 11
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 7.858472 pixels
  Position = (462.8, 309.2) = 16 16 2.39 -6 9 48.4
  Extent = 46.4 (44.4-47.7)", rotation angle = 0
  Source counts = 2057.0 +/- 45.4
  Background counts = 0.0
  Rate = 0.1 +/- 0.003
[Mon Feb 13 14:15:44 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 14:15:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 14:15:44 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 14:15:44 2012] Source does appear to be extended
[Mon Feb 13 14:15:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 14:15:44 2012] Source is confused with source 2
[Mon Feb 13 14:15:44 2012] Source is confused with source 12
[Mon Feb 13 14:15:44 2012] Source is confused with source 13
[Mon Feb 13 14:15:53 2012] Counts = 2057.000000, rescaling region sizes by 2.000000
[Mon Feb 13 14:15:53 2012] XMMSAS src. selection expression = ellipse(40214.803000, 26853.826000, 5564.136160, 5564.136160, 0.000000, X, Y)
[Mon Feb 13 14:15:53 2012] Writing source region out to fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src15_src.reg
[Mon Feb 13 14:15:53 2012] Extracting stamp from image fullrun_pn_xmm0112230701_pi300-10000_cl_sm2.00.img.gz, (143, 0) - (595, 595)
[Mon Feb 13 14:15:53 2012] XMMSAS bgd. selection expression = annulus(40214.803000, 26853.826000, 18547.120534, 37094.241067, X, Y) && !ellipse(21678.605600, 33978.244600, 413.644812, 413.644812, 0.000000, X, Y) && !ellipse(40536.997345, 28831.737823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32771.416321, 23456.320374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14369.797226, 21265.388870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17480.383366, 18818.753333, 694.945107, 282.791812, 62.365406, X, Y) && !ellipse(26824.004000, 40164.355600, 342.596423, 342.596423, 0.000000, X, Y) && !ellipse(22760.992096, 32800.435791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34337.649963, 30745.485596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22221.582608, 30799.685600, 497.359652, 497.359652, 0.000000, X, Y) && !ellipse(34989.573822, 28428.916779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33104.744200, 28398.619800, 279.117239, 279.117239, 0.000000, X, Y) && !ellipse(40565.403503, 27955.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40109.355000, 27834.862000, 1906.192055, 1906.192055, 0.000000, X, Y) && !ellipse(18466.012540, 26027.596800, 366.202411, 366.202411, 0.000000, X, Y) && !ellipse(33928.335000, 22016.109200, 356.508010, 356.508010, 0.000000, X, Y) && !ellipse(28076.561400, 20931.345600, 510.486415, 258.212807, 340.137855, X, Y) && !ellipse(24412.322746, 14438.883525, 842.385524, 229.650234, 12.423415, X, Y)
[Mon Feb 13 14:15:53 2012] Writing fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src15.gif
[Mon Feb 13 14:21:31 2012] Mean detx,y = (11511.52, 3123.07) 
[Mon Feb 13 14:21:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 14:29:42 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 14:29:43 2012] Setting source spectrum file to fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon Feb 13 14:29:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Mon Feb 13 15:17:46 2012] Updating aperture counts using extracted products
[Mon Feb 13 15:17:46 2012] Error reading totcts from fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon Feb 13 15:17:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 15:17:47 2012] Using photon index=1.80, rate=0.145, arf fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src15.arf
[Mon Feb 13 15:17:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 15:17:47 2012] Updating source flux to 6.2e-13
[Mon Feb 13 15:18:21 2012] Flag c found in src. 15 procflags, skipping spectral fitting