[Mon Feb 13 11:47:08 2012] Detection parameters:
  Position = (460.6, 316.1) = 16 16 3.01 -6 9 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.7 +/- 19.1
  Background counts = 103.3
  Rate = 0.004 +/- 0.0008

[Mon Feb 13 11:47:09 2012] Off-axis axis estimate = 11.83'
[Mon Feb 13 11:49:24 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 11:49:24 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Mon Feb 13 11:49:24 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Mon Feb 13 11:49:24 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.34"
[Mon Feb 13 12:11:18 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src11.ximg exists
[Mon Feb 13 12:11:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src11.csv
[Mon Feb 13 12:11:18 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Feb 13 12:11:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src11.csv
[Mon Feb 13 12:11:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 12:11:18 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Feb 13 12:11:18 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Feb 13 12:11:18 2012] Fit fullrun_pn_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Feb 13 12:58:16 2012] Spatial fit model total counts = 905.598000, observed total counts = 904.000000
[Mon Feb 13 12:58:16 2012] Offset between fit and detection position for source 13 = 4.526765 pixels
[Mon Feb 13 12:58:16 2012] 894.330000 total counts/ 679.542000 bgd. counts: snr = 8.239519
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 4.526765 pixels
  Position = (461.6, 320.5) = 16 16 2.74 -6 8 59.4
  Extent = 23.8 (22.1-24.7)", rotation angle = 0
  Source counts = 214.8 +/- 29.9
  Background counts = 679.5
  Rate = 0.02 +/- 0.002
[Mon Feb 13 12:58:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 12:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 12:58:16 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 12:58:16 2012] Source does appear to be extended
[Mon Feb 13 12:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 12:58:16 2012] Source is confused with source 2
[Mon Feb 13 12:58:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 13 12:58:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 12:58:27 2012] Initial guess for spatial extent in simple fitting = 23.83"
[Mon Feb 13 12:58:27 2012] source mask rpix=5.5, npix_max = 142, mask sum = 132, frac = 0.924
[Mon Feb 13 12:58:27 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 23.83"
[Mon Feb 13 13:31:00 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src11.ximg exists
[Mon Feb 13 13:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src11.csv
[Mon Feb 13 13:31:00 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Feb 13 13:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src11.csv
[Mon Feb 13 13:31:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 13:31:00 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Feb 13 13:31:00 2012] fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Feb 13 13:31:00 2012] Fit fullrun_pn_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Feb 13 14:15:44 2012] Warning, spatial fit 11 centroid is now closest to src. 15
[Mon Feb 13 14:15:44 2012] Source 13 is offset by 4.203115 and 2.879839 pixels which is larger than
2 X fitted extent = 1.452322 x 1.452322, not incorporating fit results
[Mon Feb 13 14:15:44 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 14:15:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 14:15:44 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 14:15:44 2012] Source does appear to be extended
[Mon Feb 13 14:15:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 14:15:53 2012] XMMSAS src. selection expression = ellipse(40109.355000, 27834.862000, 1429.644041, 1429.644041, 0.000000, X, Y)
[Mon Feb 13 14:15:53 2012] Writing source region out to fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src13_src.reg
[Mon Feb 13 14:15:53 2012] Extracting stamp from image fullrun_pn_xmm0112230701_pi300-10000_cl_sm2.00.img.gz, (379, 238) - (544, 403)
[Mon Feb 13 14:15:53 2012] XMMSAS bgd. selection expression = annulus(40109.355000, 27834.862000, 2382.740069, 4765.480137, X, Y) && !ellipse(40536.997345, 28831.737823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34989.573822, 28428.916779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40565.403503, 27955.527710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40214.803000, 26853.826000, 3709.424107, 3709.424107, 0.000000, X, Y)
[Mon Feb 13 14:15:53 2012] Writing fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src13.gif
[Mon Feb 13 14:20:59 2012] Mean detx,y = (12984.92, 2611.13) 
[Mon Feb 13 14:21:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 14:21:24 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 14:21:24 2012] Setting source spectrum file to fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Feb 13 14:21:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Feb 13 15:17:46 2012] Updating aperture counts using extracted products
[Mon Feb 13 15:17:46 2012] Error reading totcts from fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Feb 13 15:17:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 15:17:46 2012] Using photon index=1.80, rate=0.0151, arf fullrun_pn_xmm0112230701_pi300-10000_pass1_cl_src13.arf
[Mon Feb 13 15:17:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 15:17:47 2012] Updating source flux to 6.8e-14
[Mon Feb 13 15:18:21 2012] Flag b found in src. 13 procflags, skipping spectral fitting
[Mon Feb 13 15:18:21 2012] Flag c found in src. 13 procflags, skipping spectral fitting