[Mon Feb 13 11:47:44 2012] Detection parameters:
  Position = (502.5, 324.0) = 16 15 50.81 -6 8 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 275.1 +/- 26.8
  Background counts = 119.2
  Rate = 0.01 +/- 0.001

[Mon Feb 13 11:47:44 2012] Off-axis axis estimate = 14.91'
[Mon Feb 13 12:30:50 2012] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 12:30:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 12:30:50 2012] Initial guess for spatial extent in simple fitting = 13.88"
[Mon Feb 13 12:30:50 2012] source mask rpix=3.2, npix_max = 54, mask sum = 48, frac = 0.881
[Mon Feb 13 12:30:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.88"
[Mon Feb 13 12:58:12 2012] fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 13 12:58:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 12:58:12 2012] fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 13 12:58:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_src1.csv
[Mon Feb 13 12:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 12:58:12 2012] fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 13 12:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Feb 13 12:58:12 2012] fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 13 12:58:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Feb 13 12:58:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 12:58:20 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Mon Feb 13 12:58:20 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.183913 pixels away
[Mon Feb 13 12:58:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 12:58:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 12:58:20 2012] Assessing source extent using major
[Mon Feb 13 12:58:20 2012] Source does appear to be extended
[Mon Feb 13 12:58:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 13:53:26 2012] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 13:53:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 13 13:53:26 2012] Initial guess for spatial extent in simple fitting = 13.88"
[Mon Feb 13 13:53:26 2012] source mask rpix=3.2, npix_max = 54, mask sum = 48, frac = 0.881
[Mon Feb 13 13:53:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.88"
[Mon Feb 13 14:15:40 2012] fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 13 14:15:40 2012] fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 13 14:15:40 2012] Fit fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Feb 13 14:15:40 2012] fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 13 14:15:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Feb 13 14:15:40 2012] fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 13 14:15:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Feb 13 14:15:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 14:15:47 2012] Spatial fit model total counts = 1994.940000, observed total counts = 2164.000000
[Mon Feb 13 14:15:47 2012] Offset between fit and detection position for source 1 = 1.240553 pixels
[Mon Feb 13 14:15:47 2012] 1877.927000 total counts/ 1668.030000 bgd. counts: snr = 5.139304
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.240553 pixels
  Position = (501.9, 322.9) = 16 15 50.97 -6 8 48.8
  Extent = 8.6" x 6.8", rotation angle = 83
  Source counts = 209.9 +/- 43.3
  Background counts = 1668.0
  Rate = 0.01 +/- 0.002
[Mon Feb 13 14:15:47 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 14:15:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 14:15:47 2012] Assessing source extent using major
[Mon Feb 13 14:15:47 2012] Source does appear to be extended
[Mon Feb 13 14:15:47 2012] Computing asymmetry using major and minor axis, asym = 1.26
[Mon Feb 13 15:02:53 2012] XMMSAS src. selection expression = ellipse(43620.835512, 28046.012879, 516.327615, 410.886528, 82.965415, X, Y)
[Mon Feb 13 15:02:53 2012] Writing source region out to fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 13 15:02:53 2012] Extracting stamp from image fullrun_mos2_xmm0112230701_pi300-10000_cl_sm2.00.img.gz, (472, 293) - (532, 353)
[Mon Feb 13 15:02:53 2012] XMMSAS bgd. selection expression = annulus(43620.835512, 28046.012879, 860.546025, 1721.092050, X, Y) && !ellipse(43644.733032, 28838.733826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43814.012390, 29227.318604, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 13 15:02:53 2012] Writing fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1.gif
[Mon Feb 13 15:02:55 2012] Mean detx,y = (-16533.29, -3097.89) 
[Mon Feb 13 15:02:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 13 15:03:03 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 13 15:03:03 2012] Setting source spectrum file to fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 15:03:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 13 15:17:47 2012] Updating aperture counts using extracted products
[Mon Feb 13 15:17:47 2012] Error reading totcts from fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 13 15:17:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 15:17:47 2012] Using photon index=1.80, rate=0.00969, arf fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 15:17:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 15:17:47 2012] Updating source flux to 2.4e-13
[Mon Feb 13 15:18:21 2012] Reading fit data from xmm0112230701/analysis//spectral/fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 13 15:18:21 2012] Spectral fit parameter nH value = 3.72015e+21
[Mon Feb 13 15:18:21 2012] Spectral fit parameter PhoIndex value = 2.04259
[Mon Feb 13 15:18:21 2012] Failed to get F(0.3-8.0) from xmm0112230701/analysis//spectral/fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 13 15:18:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 15:18:21 2012] Using Nh = 3.7e+21, photon index=2.04, rate=0.00969, arf fullrun_mos2_xmm0112230701_pi300-10000_pass1_cl_src1.arf
[Mon Feb 13 15:18:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 13 15:18:21 2012] Updating source flux to 3e-13