[Fri Jun 22 03:59:52 2012] Detection parameters:
  Position = (144.1, 365.3) = 11 56 7.28 23 31 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.2 +/- 21.1
  Background counts = 5.0
  Rate = 0.01 +/- 0.0008

[Fri Jun 22 03:59:53 2012] Off-axis axis estimate = 12.19'
[Fri Jun 22 06:31:30 2012] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 06:31:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 06:31:30 2012] Initial guess for spatial extent in simple fitting = 12.52"
[Fri Jun 22 06:31:30 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.073
[Fri Jun 22 06:31:30 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.52"
[Fri Jun 22 09:01:15 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun 22 09:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src13.csv
[Fri Jun 22 09:01:15 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun 22 09:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src13.csv
[Fri Jun 22 09:01:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 09:01:17 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun 22 09:01:17 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun 22 09:01:17 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun 22 09:01:44 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.580929 pixels away
[Fri Jun 22 09:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:44 2012] Assessing source extent using major
[Fri Jun 22 09:01:44 2012] Source does appear to be extended
[Fri Jun 22 09:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 10:56:36 2012] Using EEF radius (= 12.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 10:56:36 2012] Initial guess for spatial extent in simple fitting = 12.52"
[Fri Jun 22 10:56:36 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.073
[Fri Jun 22 10:56:36 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.52"
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jun 22 13:05:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src13.csv
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jun 22 13:05:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src13.csv
[Fri Jun 22 13:05:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jun 22 13:05:57 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jun 22 13:06:25 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.681184 pixels away
[Fri Jun 22 13:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:25 2012] Assessing source extent using major
[Fri Jun 22 13:06:25 2012] Source does appear to be extended
[Fri Jun 22 13:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 15:16:43 2012] XMMSAS src. selection expression = ellipse(12490.821045, 31729.978424, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing source region out to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 22 15:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (107, 328) - (182, 403)
[Fri Jun 22 15:16:43 2012] XMMSAS bgd. selection expression = annulus(12490.821045, 31729.978424, 1087.500000, 2175.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src5.gif
[Fri Jun 22 15:25:18 2012] Mean detx,y = (-7705.76, -13211.37) 
[Fri Jun 22 15:25:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 15:25:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 15:25:35 2012] Setting source spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 15:25:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 22 19:22:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 19:22:48 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:23:43 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:43 2012] Error reading totcts from fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 20:23:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:45 2012] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src5.arf
[Fri Jun 22 20:23:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:45 2012] Updating source flux to 2.5e-13
[Fri Jun 22 20:25:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting