[Fri Jun 22 03:59:52 2012] Detection parameters:
  Position = (395.2, 297.3) = 11 54 47.90 23 26 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 621.6 +/- 30.1
  Background counts = 8.3
  Rate = 0.04 +/- 0.002

[Fri Jun 22 03:59:53 2012] Off-axis axis estimate = 7.01'
[Fri Jun 22 06:31:30 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 06:31:30 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Fri Jun 22 06:31:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.161
[Fri Jun 22 06:31:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.94"
[Fri Jun 22 09:01:15 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 22 09:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src3.csv
[Fri Jun 22 09:01:15 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 22 09:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src3.csv
[Fri Jun 22 09:01:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 22 09:01:16 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 22 09:01:44 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.539928 pixels away
[Fri Jun 22 09:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:44 2012] Assessing source extent using major
[Fri Jun 22 09:01:44 2012] Source does appear to be extended
[Fri Jun 22 09:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 10:56:36 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 10:56:36 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Fri Jun 22 10:56:36 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.161
[Fri Jun 22 10:56:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.94"
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 22 13:05:56 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 22 13:05:57 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 22 13:06:25 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.583105 pixels away
[Fri Jun 22 13:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:25 2012] Assessing source extent using major
[Fri Jun 22 13:06:25 2012] Source does appear to be extended
[Fri Jun 22 13:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 15:16:43 2012] XMMSAS src. selection expression = ellipse(34332.387695, 25812.627014, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing source region out to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 22 15:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (358, 260) - (433, 335)
[Fri Jun 22 15:16:43 2012] XMMSAS bgd. selection expression = annulus(34332.387695, 25812.627014, 1087.500000, 2175.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src4.gif
[Fri Jun 22 15:20:53 2012] Mean detx,y = (8487.50, 2515.62) 
[Fri Jun 22 15:20:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 15:21:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 15:21:09 2012] Setting source spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 15:21:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 22 18:57:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 18:57:12 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:23:43 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:43 2012] Error reading totcts from fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 20:23:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:45 2012] Using photon index=1.80, rate=0.0405, arf fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src4.arf
[Fri Jun 22 20:23:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:45 2012] Updating source flux to 7e-13
[Fri Jun 22 20:25:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting