[Fri Jun 22 03:59:52 2012] Detection parameters:
  Position = (304.1, 239.8) = 11 55 16.69 23 21 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.8 +/- 16.9
  Background counts = 38.5
  Rate = 0.006 +/- 0.0008

[Fri Jun 22 03:59:53 2012] Off-axis axis estimate = 4.27'
[Fri Jun 22 06:31:30 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 06:31:30 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Fri Jun 22 06:31:30 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.943
[Fri Jun 22 06:31:30 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.56"
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun 22 09:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src23.csv
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun 22 09:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src23.csv
[Fri Jun 22 09:01:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 09:01:17 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun 22 09:01:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 22 09:01:17 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun 22 09:01:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 22 09:01:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 09:01:44 2012] Warning, spatial fit 23 centroid is now closest to src. 17
[Fri Jun 22 09:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:44 2012] Assessing source extent using major
[Fri Jun 22 09:01:44 2012] Source does appear to be extended
[Fri Jun 22 09:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 09:01:44 2012] Source is confused with source 35
[Fri Jun 22 10:56:36 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 10:56:36 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Fri Jun 22 10:56:36 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.943
[Fri Jun 22 10:56:36 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.56"
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src22.ximg exists
[Fri Jun 22 13:05:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src22.csv
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Jun 22 13:05:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src22.csv
[Fri Jun 22 13:05:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Jun 22 13:05:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jun 22 13:05:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Jun 22 13:05:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 13:06:25 2012] Warning, spatial fit 22 centroid is now closest to src. 34
[Fri Jun 22 13:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:25 2012] Assessing source extent using major
[Fri Jun 22 13:06:25 2012] Source does appear to be extended
[Fri Jun 22 13:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 15:16:44 2012] XMMSAS src. selection expression = ellipse(26407.982819, 20811.826233, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 15:16:44 2012] Writing source region out to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src25_src.reg
[Fri Jun 22 15:16:44 2012] Extracting stamp from image fullrun_mos2_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (267, 202) - (342, 277)
[Fri Jun 22 15:16:44 2012] XMMSAS bgd. selection expression = annulus(26407.982819, 20811.826233, 1087.500000, 2175.000000, X, Y) && !ellipse(25881.628800, 23450.271800, 5453.832157, 5453.832157, 0.000000, X, Y) && !ellipse(24702.904000, 23150.342000, 762.043222, 762.043222, 0.000000, X, Y) && !ellipse(25695.962372, 21269.196182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26323.364000, 22037.640000, 2636.336076, 2636.336076, 0.000000, X, Y) && !ellipse(27060.713806, 20671.541122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.279633, 22139.472305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26366.296204, 20242.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25162.097046, 20131.486923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.091980, 21677.732178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.666000, 21254.118000, 1318.168038, 1318.168038, 0.000000, X, Y) && !ellipse(24851.414000, 19676.522000, 1417.432041, 1417.432041, 0.000000, X, Y) && !ellipse(26944.754000, 19064.772000, 1404.592040, 1404.592040, 0.000000, X, Y)
[Fri Jun 22 15:16:44 2012] Writing fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src25.gif
[Fri Jun 22 15:30:02 2012] Mean detx,y = (-899.15, 3012.69) 
[Fri Jun 22 15:30:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 15:30:18 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 15:30:19 2012] Setting source spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jun 22 15:30:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Jun 22 19:59:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 19:59:45 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:23:44 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:44 2012] Error reading totcts from fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jun 22 20:23:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:45 2012] Using photon index=1.80, rate=0.00646, arf fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src25.arf
[Fri Jun 22 20:23:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:45 2012] Updating source flux to 7.8e-14
[Fri Jun 22 20:25:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting