[Fri Jun 22 03:59:52 2012] Detection parameters:
  Position = (298.0, 271.0) = 11 55 18.62 23 24 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4728.7 +/- 83.9
  Background counts = 65.0
  Rate = 0.2 +/- 0.003

[Fri Jun 22 03:59:53 2012] Off-axis axis estimate = 1.99'
[Fri Jun 22 06:31:30 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 06:31:30 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Fri Jun 22 06:31:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821
[Fri Jun 22 06:31:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.42"
[Fri Jun 22 09:01:15 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 22 09:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 09:01:15 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 22 09:01:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 09:01:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 22 09:01:16 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 22 09:01:44 2012] Spatial fit model total counts = 14275.000000, observed total counts = 13424.000000
[Fri Jun 22 09:01:44 2012] Offset between fit and detection position for source 2 = 0.739235 pixels
[Fri Jun 22 09:01:44 2012] 14335.230000 total counts/ 8914.280000 bgd. counts: snr = 57.415912
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.739235 pixels
  Position = (298.3, 270.3) = 11 55 18.53 23 24 8.2
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 5420.9 +/- 119.7
  Background counts = 8914.3
  Rate = 0.2 +/- 0.005
[Fri Jun 22 09:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:44 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 09:01:44 2012] Source does appear to be extended
[Fri Jun 22 09:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 10:56:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 10:56:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 10:56:36 2012] Initial guess for spatial extent in simple fitting = 14.85"
[Fri Jun 22 10:56:36 2012] source mask rpix=3.4, npix_max = 61, mask sum = 60, frac = 0.979
[Fri Jun 22 10:56:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.85"
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 22 13:05:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 22 13:05:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 13:05:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 22 13:05:56 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 22 13:06:25 2012] Spatial fit model total counts = 25599.900000, observed total counts = 23673.000000
[Fri Jun 22 13:06:25 2012] Offset between fit and detection position for source 2 = 0.310782 pixels
[Fri Jun 22 13:06:25 2012] 25693.000000 total counts/ 12453.000000 bgd. counts: snr = 118.645424
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.310782 pixels
  Position = (298.0, 270.1) = 11 55 18.60 23 24 7.3
  Extent = 22.7 (22.0-23.4)", rotation angle = 0
  Source counts = 13240.0 +/- 160.3
  Background counts = 12453.0
  Rate = 0.5 +/- 0.006
[Fri Jun 22 13:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:25 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 13:06:25 2012] Source does appear to be extended
[Fri Jun 22 13:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 13:06:25 2012] Source is confused with source 3
[Fri Jun 22 13:06:25 2012] Source is confused with source 16
[Fri Jun 22 15:16:43 2012] Counts = 13240.000000, rescaling region sizes by 3.000000
[Fri Jun 22 15:16:43 2012] XMMSAS src. selection expression = ellipse(25881.628800, 23450.271800, 4090.374118, 4090.374118, 0.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing source region out to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 22 15:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (63, 35) - (533, 505)
[Fri Jun 22 15:16:43 2012] XMMSAS bgd. selection expression = annulus(25881.628800, 23450.271800, 20451.870588, 40903.741177, X, Y) && !ellipse(34332.387695, 25812.627014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.904000, 23150.342000, 762.043222, 762.043222, 0.000000, X, Y) && !ellipse(21881.343719, 17939.672623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24206.819800, 24003.647600, 368.228811, 368.228811, 0.000000, X, Y) && !ellipse(20996.349680, 27213.774800, 404.960812, 404.960812, 0.000000, X, Y) && !ellipse(33775.721669, 19497.690751, 510.738348, 339.708832, 121.018750, X, Y) && !ellipse(16991.366516, 23100.748230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29715.430080, 31924.512400, 482.570414, 482.570414, 0.000000, X, Y) && !ellipse(34501.244904, 29468.297028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26037.342000, 25602.342000, 1072.320031, 1072.320031, 0.000000, X, Y) && !ellipse(12490.821045, 31729.978424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.962372, 21269.196182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33318.535553, 36232.050537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26323.364000, 22037.640000, 2636.336076, 2636.336076, 0.000000, X, Y) && !ellipse(15114.161240, 26217.388885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.442800, 34132.659800, 381.987211, 381.987211, 0.000000, X, Y) && !ellipse(27717.337067, 24337.883026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25969.162000, 28278.868200, 349.099210, 349.099210, 0.000000, X, Y) && !ellipse(26407.982819, 20811.826233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20697.817800, 25201.832800, 346.720010, 346.720010, 0.000000, X, Y) && !ellipse(26241.939941, 37446.962738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33624.718842, 17627.885895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20435.364319, 35441.664246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24135.078613, 25156.675476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27060.713806, 20671.541122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19523.542297, 23948.698212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.279633, 22139.472305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26366.296204, 20242.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26342.966461, 26637.326904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25162.097046, 20131.486923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.091980, 21677.732178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.666000, 21254.118000, 1318.168038, 1318.168038, 0.000000, X, Y) && !ellipse(27037.656000, 26923.506000, 1396.016040, 1396.016040, 0.000000, X, Y) && !ellipse(24851.414000, 19676.522000, 1417.432041, 1417.432041, 0.000000, X, Y) && !ellipse(26944.754000, 19064.772000, 1404.592040, 1404.592040, 0.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2.gif
[Fri Jun 22 15:16:53 2012] Mean detx,y = (19.84, 393.46) 
[Fri Jun 22 15:16:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 15:20:47 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 15:20:47 2012] Setting source spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 22 15:20:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 22 20:23:43 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:43 2012] Error reading totcts from fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 22 20:23:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:45 2012] Using photon index=1.80, rate=0.513, arf fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2.arf
[Fri Jun 22 20:23:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:45 2012] Updating source flux to 4.3e-12
[Fri Jun 22 20:25:33 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jun 22 20:28:08 2012] Reading fit data from xmm0112230501/analysis//spectral/fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jun 22 20:28:08 2012] Spectral fit parameter nH value = 4.80301e+20
[Fri Jun 22 20:28:08 2012] Spectral fit parameter PhoIndex value = 1.72346
[Fri Jun 22 20:28:08 2012] Failed to get F(0.3-8.0) from xmm0112230501/analysis//spectral/fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 20:28:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:28:08 2012] Using Nh = 4.8e+20, photon index=1.72, rate=0.513, arf fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src2.arf
[Fri Jun 22 20:28:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:28:08 2012] Updating source flux to 4.7e-12