[Fri Jun 22 03:59:52 2012] Detection parameters:
  Position = (289.7, 393.0) = 11 55 21.24 23 33 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.5 +/- 13.5
  Background counts = 7.7
  Rate = 0.007 +/- 0.0009

[Fri Jun 22 03:59:53 2012] Off-axis axis estimate = 6.88'
[Fri Jun 22 06:31:30 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 06:31:30 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Fri Jun 22 06:31:30 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Fri Jun 22 06:31:30 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.87"
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src20.ximg exists
[Fri Jun 22 09:01:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src20.csv
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Jun 22 09:01:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src20.csv
[Fri Jun 22 09:01:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 09:01:17 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Jun 22 09:01:17 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Jun 22 09:01:17 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Jun 22 09:01:44 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 14.080555 pixels away
[Fri Jun 22 09:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:44 2012] Assessing source extent using major
[Fri Jun 22 09:01:44 2012] Source does appear to be extended
[Fri Jun 22 09:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 10:56:36 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 10:56:36 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Fri Jun 22 10:56:36 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Fri Jun 22 10:56:36 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 9.87"
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jun 22 13:05:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src19.csv
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jun 22 13:05:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src19.csv
[Fri Jun 22 13:05:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jun 22 13:05:57 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Jun 22 13:06:25 2012] Spatial fit model total counts = 177.379000, observed total counts = 177.000000
[Fri Jun 22 13:06:25 2012] Offset between fit and detection position for source 19 = 0.218626 pixels
[Fri Jun 22 13:06:25 2012] 179.253600 total counts/ 103.327000 bgd. counts: snr = 7.469423
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.218626 pixels
  Position = (289.5, 392.9) = 11 55 21.31 23 33 1.5
  Extent = 4.8 (3.8-6.2)", rotation angle = 0
  Source counts = 75.9 +/- 13.4
  Background counts = 103.3
  Rate = 0.003 +/- 0.0005
[Fri Jun 22 13:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:25 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 13:06:25 2012] Source does appear to be extended
[Fri Jun 22 13:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 15:16:43 2012] XMMSAS src. selection expression = ellipse(25138.442800, 34132.659800, 286.490408, 286.490408, 0.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing source region out to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src19_src.reg
[Fri Jun 22 15:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (273, 376) - (306, 409)
[Fri Jun 22 15:16:43 2012] XMMSAS bgd. selection expression = annulus(25138.442800, 34132.659800, 477.484014, 954.968027, X, Y)
[Fri Jun 22 15:16:43 2012] Writing fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src19.gif
[Fri Jun 22 15:28:52 2012] Mean detx,y = (4482.82, -9199.74) 
[Fri Jun 22 15:28:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 15:29:02 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 15:29:03 2012] Setting source spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 22 15:29:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jun 22 19:59:29 2012] Not generating rmf since there are only 75 counts
[Fri Jun 22 19:59:29 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:23:44 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:44 2012] Error reading totcts from fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jun 22 20:23:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:45 2012] Using photon index=1.80, rate=0.00294, arf fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src19.arf
[Fri Jun 22 20:23:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:45 2012] Updating source flux to 6.6e-14
[Fri Jun 22 20:25:33 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting