[Fri Jun 22 03:59:52 2012] Detection parameters:
  Position = (310.9, 250.1) = 11 55 14.55 23 22 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.1 +/- 22.0
  Background counts = 45.3
  Rate = 0.009 +/- 0.0009

[Fri Jun 22 03:59:53 2012] Off-axis axis estimate = 3.62'
[Fri Jun 22 06:31:30 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 06:31:30 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Fri Jun 22 06:31:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Fri Jun 22 06:31:30 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.24"
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src17.ximg exists
[Fri Jun 22 09:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src17.csv
[Fri Jun 22 09:01:16 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Jun 22 09:01:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src17.csv
[Fri Jun 22 09:01:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 09:01:17 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Jun 22 09:01:17 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jun 22 09:01:17 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Jun 22 09:01:44 2012] Warning, spatial fit 17 centroid is now closest to src. 59
[Fri Jun 22 09:01:44 2012] Source 16 is offset by -2.363874 and -4.470241 pixels which is larger than
2 X fitted extent = 0.968823 x 0.968823, not incorporating fit results
[Fri Jun 22 09:01:44 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:44 2012] Assessing source extent using major
[Fri Jun 22 09:01:44 2012] Source does appear to be extended
[Fri Jun 22 09:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 09:01:44 2012] Source is confused with source 59
[Fri Jun 22 10:56:36 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 10:56:36 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Fri Jun 22 10:56:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Fri Jun 22 10:56:36 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.24"
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun 22 13:05:56 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun 22 13:05:56 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun 22 13:05:57 2012] fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun 22 13:05:57 2012] Fit fullrun_mos2_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jun 22 13:06:25 2012] Spatial fit model total counts = 1963.360000, observed total counts = 1829.000000
[Fri Jun 22 13:06:25 2012] Offset between fit and detection position for source 16 = 9.888166 pixels
[Fri Jun 22 13:06:25 2012] 1895.522000 total counts/ 1631.010000 bgd. counts: snr = 6.549635
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 9.888166 pixels
  Position = (303.6, 256.8) = 11 55 16.84 23 23 9.4
  Extent = 16.5 (16.4-33.0)", rotation angle = 0
  Source counts = 264.5 +/- 43.5
  Background counts = 1631.0
  Rate = 0.01 +/- 0.002
[Fri Jun 22 13:06:25 2012] Spatial fit model total counts = 2348.280000, observed total counts = 2210.000000
[Fri Jun 22 13:06:25 2012] Offset between fit and detection position for source 16 = 2.965453 pixels
[Fri Jun 22 13:06:25 2012] Warning, changing simple spatial fit ID from 17 to 36
[Fri Jun 22 13:06:25 2012] 2290.478000 total counts/ 1764.130000 bgd. counts: snr = 12.531633
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.965453 pixels
  Position = (303.1, 253.9) = 11 55 17.00 23 22 56.7
  Extent = 33.0 (29.2-65.9)", rotation angle = 0
  Source counts = 526.3 +/- 47.9
  Background counts = 1764.1
  Rate = 0.02 +/- 0.002
[Fri Jun 22 13:06:25 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:25 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 13:06:25 2012] Source does appear to be extended
[Fri Jun 22 13:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 15:16:43 2012] XMMSAS src. selection expression = ellipse(26323.364000, 22037.640000, 1977.252057, 1977.252057, 0.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing source region out to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src16_src.reg
[Fri Jun 22 15:16:43 2012] Extracting stamp from image fullrun_mos2_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (189, 140) - (417, 367)
[Fri Jun 22 15:16:43 2012] XMMSAS bgd. selection expression = annulus(26323.364000, 22037.640000, 3295.420095, 6590.840190, X, Y) && !ellipse(25881.628800, 23450.271800, 5453.832157, 5453.832157, 0.000000, X, Y) && !ellipse(24702.904000, 23150.342000, 762.043222, 762.043222, 0.000000, X, Y) && !ellipse(21881.343719, 17939.672623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24206.819800, 24003.647600, 368.228811, 368.228811, 0.000000, X, Y) && !ellipse(20996.349680, 27213.774800, 404.960812, 404.960812, 0.000000, X, Y) && !ellipse(26037.342000, 25602.342000, 1072.320031, 1072.320031, 0.000000, X, Y) && !ellipse(25695.962372, 21269.196182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27717.337067, 24337.883026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25969.162000, 28278.868200, 349.099210, 349.099210, 0.000000, X, Y) && !ellipse(26407.982819, 20811.826233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20697.817800, 25201.832800, 346.720010, 346.720010, 0.000000, X, Y) && !ellipse(33624.718842, 17627.885895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24135.078613, 25156.675476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27060.713806, 20671.541122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19523.542297, 23948.698212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.279633, 22139.472305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26366.296204, 20242.213593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26342.966461, 26637.326904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25162.097046, 20131.486923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.091980, 21677.732178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27492.666000, 21254.118000, 1318.168038, 1318.168038, 0.000000, X, Y) && !ellipse(27037.656000, 26923.506000, 1396.016040, 1396.016040, 0.000000, X, Y) && !ellipse(24851.414000, 19676.522000, 1417.432041, 1417.432041, 0.000000, X, Y) && !ellipse(26944.754000, 19064.772000, 1404.592040, 1404.592040, 0.000000, X, Y)
[Fri Jun 22 15:16:43 2012] Writing fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src16.gif
[Fri Jun 22 15:26:37 2012] Mean detx,y = (-189.56, 1158.65) 
[Fri Jun 22 15:26:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 15:28:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 15:28:11 2012] Setting source spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 22 15:28:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jun 22 20:23:43 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:44 2012] Error reading totcts from fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 22 20:23:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:45 2012] Using photon index=1.80, rate=0.0204, arf fullrun_mos2_xmm0112230501_pi300-10000_pass1_cl_src16.arf
[Fri Jun 22 20:23:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:45 2012] Updating source flux to 2.1e-13
[Fri Jun 22 20:25:33 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Fri Jun 22 20:25:33 2012] Flag c found in src. 16 procflags, skipping spectral fitting