[Fri Jun 22 03:59:15 2012] Detection parameters:
  Position = (306.9, 256.0) = 11 55 15.82 23 23 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 437.9 +/- 29.0
  Background counts = 52.6
  Rate = 0.02 +/- 0.001

[Fri Jun 22 03:59:16 2012] Off-axis axis estimate = 3.14'
[Fri Jun 22 04:41:46 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 04:41:46 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jun 22 04:41:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Fri Jun 22 04:41:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.00"
[Fri Jun 22 06:31:28 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 22 06:31:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src5.csv
[Fri Jun 22 06:31:28 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 22 06:31:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src5.csv
[Fri Jun 22 06:31:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 22 06:31:29 2012] Fit fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 22 09:01:32 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.876010 pixels away
[Fri Jun 22 09:01:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:32 2012] Assessing source extent using major
[Fri Jun 22 09:01:32 2012] Source does appear to be extended
[Fri Jun 22 09:01:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 09:15:38 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 09:15:38 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jun 22 09:15:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Fri Jun 22 09:15:38 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.00"
[Fri Jun 22 10:56:34 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 22 10:56:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src5.csv
[Fri Jun 22 10:56:34 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 22 10:56:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src5.csv
[Fri Jun 22 10:56:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 22 10:56:35 2012] Fit fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun 22 13:06:12 2012] Source 6 is offset by 4.975443 and -8.391155 pixels which is larger than
2 X fitted extent = 5.200782 x 5.200782, not incorporating fit results
[Fri Jun 22 13:06:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:12 2012] Assessing source extent using major
[Fri Jun 22 13:06:12 2012] Source does appear to be extended
[Fri Jun 22 13:06:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 13:10:40 2012] XMMSAS src. selection expression = ellipse(26648.135529, 22219.343552, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 13:10:40 2012] Writing source region out to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 22 13:10:40 2012] Extracting stamp from image fullrun_mos1_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (269, 218) - (344, 293)
[Fri Jun 22 13:10:40 2012] XMMSAS bgd. selection expression = annulus(26648.135529, 22219.343552, 1087.500000, 2175.000000, X, Y) && !ellipse(25893.157820, 23463.575400, 1187.840034, 1187.840034, 0.000000, X, Y) && !ellipse(25790.331400, 21854.346000, 899.152026, 899.152026, 0.000000, X, Y) && !ellipse(25085.246000, 21219.958000, 1380.248040, 1380.248040, 0.000000, X, Y) && !ellipse(25901.273132, 21098.691528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.937531, 20757.627792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24473.897522, 20841.184219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23960.061737, 20880.576889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28140.819550, 22850.086914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.481689, 19359.745575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28587.793732, 23020.104370, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 13:10:40 2012] Writing fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src6.gif
[Fri Jun 22 13:18:04 2012] Mean detx,y = (2076.97, -153.08) 
[Fri Jun 22 13:18:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 13:18:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 13:18:16 2012] Setting source spectrum file to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 22 13:18:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 22 14:11:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 14:11:23 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:23:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:38 2012] Error reading totcts from fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 22 20:23:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:41 2012] Using photon index=1.80, rate=0.0177, arf fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src6.arf
[Fri Jun 22 20:23:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:41 2012] Updating source flux to 1.8e-13
[Fri Jun 22 20:23:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting