[Fri Jun 22 03:59:16 2012] Detection parameters:
  Position = (281.9, 240.1) = 11 55 23.71 23 21 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.0 +/- 15.9
  Background counts = 46.3
  Rate = 0.004 +/- 0.0006

[Fri Jun 22 03:59:16 2012] Off-axis axis estimate = 4.40'
[Fri Jun 22 04:41:46 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 04:41:46 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Fri Jun 22 04:41:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.014
[Fri Jun 22 04:41:46 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.63"
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jun 22 06:31:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src30.csv
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jun 22 06:31:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src30.csv
[Fri Jun 22 06:31:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jun 22 06:31:29 2012] Fit fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Jun 22 09:01:32 2012] Warning, spatial fit 30 centroid is now closest to src. 15
[Fri Jun 22 09:01:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:32 2012] Assessing source extent using major
[Fri Jun 22 09:01:32 2012] Source does appear to be extended
[Fri Jun 22 09:01:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 09:01:32 2012] Source is confused with source 15
[Fri Jun 22 09:15:38 2012] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 09:15:38 2012] Initial guess for spatial extent in simple fitting = 8.63"
[Fri Jun 22 09:15:38 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.014
[Fri Jun 22 09:15:38 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 8.63"
[Fri Jun 22 10:56:34 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src29.ximg exists
[Fri Jun 22 10:56:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src29.csv
[Fri Jun 22 10:56:34 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Jun 22 10:56:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src29.csv
[Fri Jun 22 10:56:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Jun 22 10:56:35 2012] Fit fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Jun 22 13:06:12 2012] Warning, spatial fit 29 centroid is now closest to src. 15
[Fri Jun 22 13:06:12 2012] Source 50 is offset by 0.363857 and -8.260296 pixels which is larger than
2 X fitted extent = 1.039559 x 0.997600, not incorporating fit results
[Fri Jun 22 13:06:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:12 2012] Assessing source extent using major
[Fri Jun 22 13:06:12 2012] Source does appear to be extended
[Fri Jun 22 13:06:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 13:10:40 2012] XMMSAS src. selection expression = ellipse(24473.897522, 20841.184219, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 13:10:40 2012] Writing source region out to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src50_src.reg
[Fri Jun 22 13:10:40 2012] Extracting stamp from image fullrun_mos1_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (244, 203) - (319, 278)
[Fri Jun 22 13:10:40 2012] XMMSAS bgd. selection expression = annulus(24473.897522, 20841.184219, 1087.500000, 2175.000000, X, Y) && !ellipse(25893.157820, 23463.575400, 1187.840034, 1187.840034, 0.000000, X, Y) && !ellipse(25790.331400, 21854.346000, 899.152026, 899.152026, 0.000000, X, Y) && !ellipse(21883.466415, 17973.800369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26648.135529, 22219.343552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.246000, 21219.958000, 1380.248040, 1380.248040, 0.000000, X, Y) && !ellipse(25901.273132, 21098.691528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.937531, 20757.627792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23960.061737, 20880.576889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.481689, 19359.745575, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 13:10:40 2012] Writing fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src50.gif
[Fri Jun 22 13:25:54 2012] Mean detx,y = (2311.13, 2285.13) 
[Fri Jun 22 13:25:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 13:26:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 13:26:16 2012] Setting source spectrum file to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jun 22 13:26:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Jun 22 15:15:27 2012] Not generating rmf since there are only 90 counts
[Fri Jun 22 15:15:27 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:23:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:40 2012] Error reading totcts from fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jun 22 20:23:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:42 2012] Using photon index=1.80, rate=0.00364, arf fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src50.arf
[Fri Jun 22 20:23:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:42 2012] Updating source flux to 3.7e-14
[Fri Jun 22 20:23:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting