[Fri Jun 22 03:59:15 2012] Detection parameters:
  Position = (324.0, 263.2) = 11 55 10.40 23 23 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.7 +/- 14.0
  Background counts = 41.7
  Rate = 0.003 +/- 0.0006

[Fri Jun 22 03:59:16 2012] Off-axis axis estimate = 3.16'
[Fri Jun 22 04:41:46 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 04:41:46 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Fri Jun 22 04:41:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.913
[Fri Jun 22 04:41:46 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 8.01"
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src39.ximg exists
[Fri Jun 22 06:31:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src39.csv
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri Jun 22 06:31:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src39.csv
[Fri Jun 22 06:31:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:31:30 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri Jun 22 06:31:30 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Jun 22 06:31:30 2012] Fit fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Jun 22 09:01:32 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 10.478790 pixels away
[Fri Jun 22 09:01:32 2012] Source 43 is offset by 2.155558 and -6.807093 pixels which is larger than
2 X fitted extent = 0.927720 x 0.927720, not incorporating fit results
[Fri Jun 22 09:01:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:32 2012] Assessing source extent using major
[Fri Jun 22 09:01:32 2012] Source does appear to be extended
[Fri Jun 22 09:01:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 09:01:32 2012] Source is confused with source 42
[Fri Jun 22 09:15:38 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 09:15:38 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Fri Jun 22 09:15:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.913
[Fri Jun 22 09:15:38 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 8.01"
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src34.ximg exists
[Fri Jun 22 10:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src34.csv
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src34_1.ximg exists
[Fri Jun 22 10:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src34.csv
[Fri Jun 22 10:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Fri Jun 22 10:56:35 2012] Fit fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Jun 22 13:06:12 2012] Warning, spatial fit 34 centroid is now closest to src. 42
[Fri Jun 22 13:06:12 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 10.505160 pixels away
[Fri Jun 22 13:06:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:12 2012] Assessing source extent using major
[Fri Jun 22 13:06:12 2012] Source does appear to be extended
[Fri Jun 22 13:06:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 13:10:40 2012] XMMSAS src. selection expression = ellipse(28140.819550, 22850.086914, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 13:10:40 2012] Writing source region out to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src43_src.reg
[Fri Jun 22 13:10:40 2012] Extracting stamp from image fullrun_mos1_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (287, 226) - (362, 301)
[Fri Jun 22 13:10:40 2012] XMMSAS bgd. selection expression = annulus(28140.819550, 22850.086914, 1087.500000, 2175.000000, X, Y) && !ellipse(25893.157820, 23463.575400, 1187.840034, 1187.840034, 0.000000, X, Y) && !ellipse(25790.331400, 21854.346000, 899.152026, 899.152026, 0.000000, X, Y) && !ellipse(26648.135529, 22219.343552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.246000, 21219.958000, 1380.248040, 1380.248040, 0.000000, X, Y) && !ellipse(25901.273132, 21098.691528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.937531, 20757.627792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24777.566000, 26645.750000, 2191.584063, 2191.584063, 0.000000, X, Y) && !ellipse(28587.793732, 23020.104370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27731.158000, 25643.990000, 1181.016034, 1181.016034, 0.000000, X, Y)
[Fri Jun 22 13:10:40 2012] Writing fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src43.gif
[Fri Jun 22 13:27:03 2012] Mean detx,y = (2317.36, -1742.10) 
[Fri Jun 22 13:27:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 13:27:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 13:27:28 2012] Setting source spectrum file to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jun 22 13:27:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Jun 22 15:16:05 2012] Not generating rmf since there are only 68 counts
[Fri Jun 22 15:16:05 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:23:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:40 2012] Error reading totcts from fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jun 22 20:23:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:42 2012] Using photon index=1.80, rate=0.00285, arf fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src43.arf
[Fri Jun 22 20:23:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:42 2012] Updating source flux to 2.9e-14
[Fri Jun 22 20:23:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting