[Fri Jun 22 03:59:15 2012] Detection parameters:
  Position = (293.2, 314.0) = 11 55 20.13 23 27 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.6 +/- 12.0
  Background counts = 28.7
  Rate = 0.002 +/- 0.0005

[Fri Jun 22 03:59:16 2012] Off-axis axis estimate = 1.19'
[Fri Jun 22 04:41:46 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 04:41:46 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Fri Jun 22 04:41:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Fri Jun 22 04:41:46 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.02"
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src48.ximg exists
[Fri Jun 22 06:31:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src48.csv
[Fri Jun 22 06:31:29 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri Jun 22 06:31:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src48.csv
[Fri Jun 22 06:31:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:31:30 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri Jun 22 06:31:30 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri Jun 22 06:31:30 2012] Fit fullrun_mos1_xmm0112230501_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Fri Jun 22 09:01:32 2012] Source 31 is offset by -6.309067 and -3.059349 pixels which is larger than
2 X fitted extent = 0.811333 x 0.811333, not incorporating fit results
[Fri Jun 22 09:01:32 2012] Spatial fit model total counts = 828.787000, observed total counts = 827.000000
[Fri Jun 22 09:01:32 2012] Offset between fit and detection position for source 31 = 3.586536 pixels
[Fri Jun 22 09:01:32 2012] Warning, changing simple spatial fit ID from 48 to 35
[Fri Jun 22 09:01:32 2012] 805.230700 total counts/ 752.109000 bgd. counts: snr = 1.937009
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.586536 pixels
  Position = (291.8, 317.3) = 11 55 20.58 23 27 32.6
  Extent = 13.7 (13.7-27.4)", rotation angle = 0
  Source counts = 53.1 +/- 28.4
  Background counts = 752.1
  Rate = 0.002 +/- 0.001
[Fri Jun 22 09:01:32 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 09:01:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 09:01:32 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 09:01:32 2012] Source does appear to be extended
[Fri Jun 22 09:01:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 09:15:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 09:15:38 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Fri Jun 22 09:15:38 2012] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.920
[Fri Jun 22 09:15:38 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 13.70"
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src41.ximg exists
[Fri Jun 22 10:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src41.csv
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri Jun 22 10:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src41.csv
[Fri Jun 22 10:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri Jun 22 10:56:35 2012] fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Jun 22 10:56:36 2012] Fit fullrun_mos1_xmm0112230501_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Fri Jun 22 13:06:12 2012] Warning, spatial fit 41 centroid is now closest to src. 37
[Fri Jun 22 13:06:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 13:06:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 13:06:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 13:06:12 2012] Source does appear to be extended
[Fri Jun 22 13:06:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 13:06:12 2012] Source is confused with source 37
[Fri Jun 22 13:06:25 2012] Warning, spatial fit 37 centroid is now closest to src. 51
[Fri Jun 22 13:10:40 2012] XMMSAS src. selection expression = ellipse(25337.942000, 27556.396000, 821.844024, 821.844024, 0.000000, X, Y)
[Fri Jun 22 13:10:40 2012] Writing source region out to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src31_src.reg
[Fri Jun 22 13:10:40 2012] Extracting stamp from image fullrun_mos1_xmm0112230501_pi300-10000_cl_sm2.00.img.gz, (245, 270) - (339, 365)
[Fri Jun 22 13:10:40 2012] XMMSAS bgd. selection expression = annulus(25337.942000, 27556.396000, 1369.740039, 2739.480079, X, Y) && !ellipse(25971.365580, 28284.456800, 339.513610, 339.513610, 0.000000, X, Y) && !ellipse(26810.406000, 26177.984000, 794.338423, 794.338423, 0.000000, X, Y) && !ellipse(24777.566000, 26645.750000, 2191.584063, 2191.584063, 0.000000, X, Y) && !ellipse(27731.158000, 25643.990000, 1181.016034, 1181.016034, 0.000000, X, Y)
[Fri Jun 22 13:10:40 2012] Writing fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src31.gif
[Fri Jun 22 13:29:27 2012] Mean detx,y = (-3012.62, -1640.20) 
[Fri Jun 22 13:29:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 13:29:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 13:29:46 2012] Setting source spectrum file to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jun 22 13:29:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Jun 22 15:16:38 2012] Not generating rmf since there are only 53 counts
[Fri Jun 22 15:16:38 2012] rmf not generated due to insufficient counts
[Fri Jun 22 20:23:40 2012] Updating aperture counts using extracted products
[Fri Jun 22 20:23:41 2012] Error reading totcts from fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jun 22 20:23:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 20:23:42 2012] Using photon index=1.80, rate=0.00205, arf fullrun_mos1_xmm0112230501_pi300-10000_pass1_cl_src31.arf
[Fri Jun 22 20:23:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 20:23:43 2012] Updating source flux to 2.1e-14
[Fri Jun 22 20:23:48 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Fri Jun 22 20:23:48 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Fri Jun 22 20:23:48 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting