[Thu Aug  2 23:40:49 2012] Detection parameters:
  Position = (282.0, 300.3) = 16 32 54.15 5 33 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.8 +/- 23.3
  Background counts = 122.9
  Rate = 0.01 +/- 0.002

[Thu Aug  2 23:40:50 2012] Off-axis axis estimate = 1.20'
[Thu Aug  2 23:44:00 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 23:44:00 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Thu Aug  2 23:44:00 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.670
[Thu Aug  2 23:44:00 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.03"
[Fri Aug  3 01:29:52 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src28.ximg exists
[Fri Aug  3 01:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src28.csv
[Fri Aug  3 01:29:52 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Aug  3 01:29:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src28.csv
[Fri Aug  3 01:29:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 01:29:53 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Aug  3 01:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Aug  3 01:29:53 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Aug  3 01:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri Aug  3 01:29:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 04:43:20 2012] Spatial fit model total counts = 3149.880000, observed total counts = 2494.000000
[Fri Aug  3 04:43:20 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug  3 04:43:20 2012] Spatial fit model total counts = 2088.230000, observed total counts = 1452.000000
[Fri Aug  3 04:43:20 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug  3 04:43:20 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 04:43:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 04:43:20 2012] Assessing source extent using major
[Fri Aug  3 04:43:20 2012] Source does appear to be extended
[Fri Aug  3 04:43:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 04:43:20 2012] Source is confused with source 28
[Fri Aug  3 04:43:45 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 04:43:45 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Aug  3 04:43:45 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.670
[Fri Aug  3 04:43:45 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.03"
[Fri Aug  3 06:53:36 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src24.ximg exists
[Fri Aug  3 06:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src24.csv
[Fri Aug  3 06:53:36 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Aug  3 06:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src24.csv
[Fri Aug  3 06:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 06:53:37 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Aug  3 06:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Aug  3 06:53:37 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Aug  3 06:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Aug  3 06:53:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 08:26:23 2012] Source 30 is offset by 2.220813 and 0.813306 pixels which is larger than
2 X fitted extent = 0.818529 x 0.818529, not incorporating fit results
[Fri Aug  3 08:26:23 2012] Warning, spatial fit 24 centroid is now closest to src. 28
[Fri Aug  3 08:26:23 2012] Spatial fit model total counts = 2140.460000, observed total counts = 1452.000000
[Fri Aug  3 08:26:23 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug  3 08:26:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 08:26:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 08:26:23 2012] Assessing source extent using major
[Fri Aug  3 08:26:23 2012] Source does appear to be extended
[Fri Aug  3 08:26:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 08:26:38 2012] XMMSAS src. selection expression = ellipse(24482.969757, 26074.561584, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug  3 08:26:38 2012] Writing source region out to fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src30_src.reg
[Fri Aug  3 08:26:38 2012] Extracting stamp from image fullrun_pn_xmm0112230301_pi300-10000_cl_sm2.00.img.gz, (244, 263) - (319, 338)
[Fri Aug  3 08:26:38 2012] XMMSAS bgd. selection expression = annulus(24482.969757, 26074.561584, 1087.500000, 2175.000000, X, Y) && !ellipse(26638.488200, 27403.181800, 3107.544089, 3107.544089, 0.000000, X, Y) && !ellipse(25964.890000, 29067.234000, 1276.536037, 1276.536037, 0.000000, X, Y) && !ellipse(25458.597443, 28874.651062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.188232, 29036.477753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.290192, 28731.568878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24894.791351, 28871.313690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23707.902985, 27887.604095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24069.398499, 27839.208221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.881800, 27259.978000, 1237.048036, 1237.048036, 7.064000, X, Y) && !ellipse(24354.535370, 26486.980560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.913849, 25380.428070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25670.912170, 24405.761505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26989.040080, 23794.833600, 1182.456034, 1182.456034, 0.000000, X, Y) && !ellipse(27117.387800, 23224.226200, 1227.160035, 690.696820, 244.495000, X, Y)
[Fri Aug  3 08:26:38 2012] Writing fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src30.gif
[Fri Aug  3 08:52:33 2012] Mean detx,y = (-2486.26, 1135.35) 
[Fri Aug  3 08:52:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 08:52:51 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 08:52:51 2012] Setting source spectrum file to fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Aug  3 08:52:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Aug  3 10:46:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug  3 10:46:51 2012] rmf not generated due to insufficient counts
[Fri Aug  3 14:22:08 2012] Updating aperture counts using extracted products
[Fri Aug  3 14:22:08 2012] Error reading totcts from fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Aug  3 14:22:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 14:22:09 2012] Using photon index=1.80, rate=0.0143, arf fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src30.arf
[Fri Aug  3 14:22:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 14:22:09 2012] Updating source flux to 6.2e-14
[Fri Aug  3 14:23:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting