[Thu Aug  2 23:40:49 2012] Detection parameters:
  Position = (293.8, 378.3) = 16 32 50.70 5 39 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.5 +/- 15.7
  Background counts = 78.2
  Rate = 0.006 +/- 0.001

[Thu Aug  2 23:40:50 2012] Off-axis axis estimate = 5.80'
[Thu Aug  2 23:44:00 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 23:44:00 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Thu Aug  2 23:44:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.894
[Thu Aug  2 23:44:00 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.33"
[Fri Aug  3 01:29:52 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src14.ximg exists
[Fri Aug  3 01:29:52 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Aug  3 01:29:52 2012] Fit fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_src14 appears to have run properly
[Fri Aug  3 01:29:53 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Aug  3 01:29:53 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Aug  3 01:29:53 2012] Fit fullrun_pn_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Aug  3 04:43:20 2012] Spatial fit model total counts = 808.679000, observed total counts = 808.000000
[Fri Aug  3 04:43:20 2012] Offset between fit and detection position for source 16 = 4.937502 pixels
[Fri Aug  3 04:43:20 2012] 794.224000 total counts/ 586.491000 bgd. counts: snr = 8.577778
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 4.937502 pixels
  Position = (298.2, 376.1) = 16 32 49.42 5 38 55.3
  Extent = 18.7 (18.6-37.3)", rotation angle = 0
  Source counts = 207.7 +/- 28.2
  Background counts = 586.5
  Rate = 0.01 +/- 0.002
[Fri Aug  3 04:43:20 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 04:43:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 04:43:20 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 04:43:20 2012] Source does appear to be extended
[Fri Aug  3 04:43:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 04:43:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 04:43:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 04:43:45 2012] Initial guess for spatial extent in simple fitting = 18.66"
[Fri Aug  3 04:43:45 2012] source mask rpix=4.3, npix_max = 91, mask sum = 100, frac = 1.090
[Fri Aug  3 04:43:45 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 18.66"
[Fri Aug  3 06:53:35 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src12.ximg exists
[Fri Aug  3 06:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src12.csv
[Fri Aug  3 06:53:35 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Aug  3 06:53:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src12.csv
[Fri Aug  3 06:53:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 06:53:36 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Aug  3 06:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Aug  3 06:53:36 2012] fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Aug  3 06:53:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Aug  3 06:53:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 08:26:23 2012] Warning, spatial fit 12 centroid is now closest to src. 20
[Fri Aug  3 08:26:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 08:26:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 08:26:23 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 08:26:23 2012] Source does appear to be extended
[Fri Aug  3 08:26:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 08:26:37 2012] XMMSAS src. selection expression = ellipse(25894.866000, 32669.916000, 1119.348032, 1119.348032, 0.000000, X, Y)
[Fri Aug  3 08:26:37 2012] Writing source region out to fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src16_src.reg
[Fri Aug  3 08:26:37 2012] Extracting stamp from image fullrun_pn_xmm0112230301_pi300-10000_cl_sm2.00.img.gz, (234, 312) - (363, 440)
[Fri Aug  3 08:26:37 2012] XMMSAS bgd. selection expression = annulus(25894.866000, 32669.916000, 1865.580054, 3731.160107, X, Y) && !ellipse(26638.488200, 27403.181800, 3107.544089, 3107.544089, 0.000000, X, Y) && !ellipse(25964.890000, 29067.234000, 1276.536037, 1276.536037, 0.000000, X, Y) && !ellipse(25458.597443, 28874.651062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.188232, 29036.477753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27835.538971, 29136.864410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23730.290192, 28731.568878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25461.111755, 29607.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.799927, 29170.307159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24894.791351, 28871.313690, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug  3 08:26:37 2012] Writing fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src16.gif
[Fri Aug  3 08:45:50 2012] Mean detx,y = (-507.30, -5174.13) 
[Fri Aug  3 08:45:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 08:46:28 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 08:46:29 2012] Setting source spectrum file to fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Aug  3 08:46:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Aug  3 14:22:08 2012] Updating aperture counts using extracted products
[Fri Aug  3 14:22:08 2012] Error reading totcts from fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Aug  3 14:22:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 14:22:08 2012] Using photon index=1.80, rate=0.0113, arf fullrun_pn_xmm0112230301_pi300-10000_pass1_cl_src16.arf
[Fri Aug  3 14:22:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 14:22:08 2012] Updating source flux to 3.5e-14