[Thu Aug  2 23:41:19 2012] Detection parameters:
  Position = (387.4, 195.1) = 16 32 23.44 5 25 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.1 +/- 19.2
  Background counts = 13.6
  Rate = 0.01 +/- 0.0009

[Thu Aug  2 23:41:19 2012] Off-axis axis estimate = 9.89'
[Fri Aug  3 01:29:54 2012] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:29:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 01:29:54 2012] Initial guess for spatial extent in simple fitting = 11.37"
[Fri Aug  3 01:29:54 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.928
[Fri Aug  3 01:29:54 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.37"
[Fri Aug  3 02:54:09 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src4.ximg exists
[Fri Aug  3 02:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src4.csv
[Fri Aug  3 02:54:09 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Aug  3 02:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src4.csv
[Fri Aug  3 02:54:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Aug  3 02:54:10 2012] Fit fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Aug  3 04:43:27 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.860173 pixels away
[Fri Aug  3 04:43:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 04:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 04:43:28 2012] Assessing source extent using major
[Fri Aug  3 04:43:28 2012] Source does appear to be extended
[Fri Aug  3 04:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 06:53:37 2012] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 06:53:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 06:53:37 2012] Initial guess for spatial extent in simple fitting = 11.37"
[Fri Aug  3 06:53:37 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.928
[Fri Aug  3 06:53:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.37"
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug  3 07:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src3.csv
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug  3 07:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src3.csv
[Fri Aug  3 07:21:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug  3 07:21:40 2012] Fit fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug  3 08:26:27 2012] Spatial fit model total counts = 340.996000, observed total counts = 341.000000
[Fri Aug  3 08:26:27 2012] Offset between fit and detection position for source 5 = 0.088713 pixels
[Fri Aug  3 08:26:27 2012] 344.357000 total counts/ 213.254000 bgd. counts: snr = 8.977678
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.088713 pixels
  Position = (387.3, 195.0) = 16 32 23.47 5 25 47.8
  Extent = 4.2 (3.4-5.3)", rotation angle = 0
  Source counts = 131.1 +/- 18.6
  Background counts = 213.3
  Rate = 0.006 +/- 0.0009
[Fri Aug  3 08:26:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 08:26:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 08:26:27 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 08:26:27 2012] Source does appear to be extended
[Fri Aug  3 08:26:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 11:30:16 2012] XMMSAS src. selection expression = ellipse(33646.038400, 16920.738200, 254.766007, 254.766007, 0.000000, X, Y)
[Fri Aug  3 11:30:16 2012] Writing source region out to fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src5_src.reg
[Fri Aug  3 11:30:16 2012] Extracting stamp from image fullrun_mos1_xmm0112230301_pi300-10000_cl_sm2.00.img.gz, (373, 180) - (402, 210)
[Fri Aug  3 11:30:16 2012] XMMSAS bgd. selection expression = annulus(33646.038400, 16920.738200, 424.610012, 849.220024, X, Y)
[Fri Aug  3 11:30:16 2012] Writing fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src5.gif
[Fri Aug  3 11:43:11 2012] Mean detx,y = (-11023.70, 5561.23) 
[Fri Aug  3 11:43:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 11:43:21 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 11:43:22 2012] Setting source spectrum file to fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Aug  3 11:43:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Aug  3 14:22:09 2012] Updating aperture counts using extracted products
[Fri Aug  3 14:22:09 2012] Error reading totcts from fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Aug  3 14:22:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 14:22:09 2012] Using photon index=1.80, rate=0.00607, arf fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src5.arf
[Fri Aug  3 14:22:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 14:22:09 2012] Updating source flux to 1.5e-13