[Thu Aug  2 23:41:19 2012] Detection parameters:
  Position = (257.0, 254.9) = 16 33 1.42 5 30 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.1 +/- 13.0
  Background counts = 20.6
  Rate = 0.006 +/- 0.0009

[Thu Aug  2 23:41:19 2012] Off-axis axis estimate = 4.36'
[Fri Aug  3 01:29:54 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:29:54 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri Aug  3 01:29:54 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.814
[Fri Aug  3 01:29:54 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.61"
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug  3 02:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src13.csv
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug  3 02:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src13.csv
[Fri Aug  3 02:54:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug  3 02:54:10 2012] Fit fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug  3 04:43:27 2012] Spatial fit model total counts = 246.753000, observed total counts = 247.000000
[Fri Aug  3 04:43:27 2012] Offset between fit and detection position for source 37 = 0.394185 pixels
[Fri Aug  3 04:43:27 2012] 244.354300 total counts/ 162.736000 bgd. counts: snr = 6.398022
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.394185 pixels
  Position = (257.4, 254.7) = 16 33 1.32 5 30 7.4
  Extent = 8.0 (4.7-12.3)", rotation angle = 0
  Source counts = 81.6 +/- 15.6
  Background counts = 162.7
  Rate = 0.004 +/- 0.0007
[Fri Aug  3 04:43:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 04:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 04:43:28 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 04:43:28 2012] Source does appear to be extended
[Fri Aug  3 04:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 06:53:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 06:53:37 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Fri Aug  3 06:53:37 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.134
[Fri Aug  3 06:53:37 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.04"
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src12.ximg exists
[Fri Aug  3 07:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src12.csv
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Aug  3 07:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src12.csv
[Fri Aug  3 07:21:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:21:41 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Aug  3 07:21:41 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Aug  3 07:21:41 2012] Fit fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Aug  3 08:26:27 2012] Warning, spatial fit 12 centroid is now closest to src. 30
[Fri Aug  3 08:26:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 08:26:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 08:26:27 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 08:26:27 2012] Source does appear to be extended
[Fri Aug  3 08:26:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 08:26:27 2012] Deleting source due to low Poisson probability 0.9