[Thu Aug  2 23:41:19 2012] Detection parameters:
  Position = (331.2, 324.0) = 16 32 39.80 5 35 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.0 +/- 25.2
  Background counts = 63.7
  Rate = 0.01 +/- 0.001

[Thu Aug  2 23:41:19 2012] Off-axis axis estimate = 3.01'
[Fri Aug  3 01:29:54 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:29:54 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Fri Aug  3 01:29:54 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.926
[Fri Aug  3 01:29:54 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.93"
[Fri Aug  3 02:54:09 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug  3 02:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src2.csv
[Fri Aug  3 02:54:09 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug  3 02:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src2.csv
[Fri Aug  3 02:54:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug  3 02:54:10 2012] Fit fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug  3 04:43:27 2012] Source 3 is offset by 7.511905 and 2.723100 pixels which is larger than
2 X fitted extent = 5.227908 x 5.227908, not incorporating fit results
[Fri Aug  3 04:43:27 2012] Source 3 is offset by -2.560762 and -0.068119 pixels which is larger than
2 X fitted extent = 0.921876 x 0.921876, not incorporating fit results
[Fri Aug  3 04:43:28 2012] Spatial fit model total counts = 1046.130000, observed total counts = 1045.000000
[Fri Aug  3 04:43:28 2012] Offset between fit and detection position for source 3 = 1.144438 pixels
[Fri Aug  3 04:43:28 2012] Warning, changing simple spatial fit ID from 2 to 30
[Fri Aug  3 04:43:28 2012] 1007.708900 total counts/ 956.528000 bgd. counts: snr = 1.654852
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.144438 pixels
  Position = (332.4, 324.0) = 16 32 39.47 5 35 8.8
  Extent = 6.5 (3.3-15.5)", rotation angle = 0
  Source counts = 51.2 +/- 31.7
  Background counts = 956.5
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability