[Thu Aug  2 23:41:19 2012] Detection parameters:
  Position = (306.9, 315.8) = 16 32 46.89 5 34 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24836.9 +/- 190.5
  Background counts = 68.4
  Rate = 1 +/- 0.009

[Thu Aug  2 23:41:19 2012] Off-axis axis estimate = 1.40'
[Fri Aug  3 01:29:54 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 01:29:54 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Fri Aug  3 01:29:54 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Fri Aug  3 01:29:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.13"
[Fri Aug  3 02:54:09 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 02:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 02:54:09 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 02:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 02:54:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 02:54:10 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 02:54:10 2012] Fit fullrun_mos1_xmm0112230301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 04:43:27 2012] Spatial fit model total counts = 39444.000000, observed total counts = 39444.000000
[Fri Aug  3 04:43:27 2012] Offset between fit and detection position for source 1 = 0.306708 pixels
[Fri Aug  3 04:43:27 2012] 39274.700000 total counts/ 16970.500000 bgd. counts: snr = 171.214023
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.306708 pixels
  Position = (306.8, 315.5) = 16 32 46.90 5 34 32.0
  Extent = 10.5 (10.3-10.7)", rotation angle = 0
  Source counts = 22304.2 +/- 198.2
  Background counts = 16970.5
  Rate = 1 +/- 0.009
[Fri Aug  3 04:43:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 04:43:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 04:43:28 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 04:43:28 2012] Source does appear to be extended
[Fri Aug  3 04:43:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 06:53:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 06:53:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 06:53:37 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Fri Aug  3 06:53:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.887
[Fri Aug  3 06:53:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.47"
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 07:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 07:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 07:21:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 07:21:40 2012] fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 07:21:40 2012] Fit fullrun_mos1_xmm0112230301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 08:26:27 2012] Spatial fit model total counts = 46147.300000, observed total counts = 46096.000000
[Fri Aug  3 08:26:27 2012] Offset between fit and detection position for source 1 = 0.059165 pixels
[Fri Aug  3 08:26:27 2012] 46096.200000 total counts/ 20224.100000 bgd. counts: snr = 181.926967
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.059165 pixels
  Position = (306.8, 315.5) = 16 32 46.91 5 34 31.8
  Extent = 11.7 (11.5-11.9)", rotation angle = 0
  Source counts = 25872.1 +/- 214.7
  Background counts = 20224.1
  Rate = 1 +/- 0.01
[Fri Aug  3 08:26:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 08:26:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 08:26:27 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 08:26:27 2012] Source does appear to be extended
[Fri Aug  3 08:26:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 11:30:16 2012] Counts = 25872.100000, rescaling region sizes by 3.000000
[Fri Aug  3 11:30:16 2012] XMMSAS src. selection expression = ellipse(26642.792580, 27400.030400, 2099.970060, 2099.970060, 0.000000, X, Y)
[Fri Aug  3 11:30:16 2012] Writing source region out to fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug  3 11:30:16 2012] Extracting stamp from image fullrun_mos1_xmm0112230301_pi300-10000_cl_sm2.00.img.gz, (186, 195) - (427, 436)
[Fri Aug  3 11:30:16 2012] XMMSAS bgd. selection expression = annulus(26642.792580, 27400.030400, 10499.850302, 20999.700604, X, Y) && !ellipse(26401.023987, 29455.810425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33646.038400, 16920.738200, 339.688010, 339.688010, 0.000000, X, Y) && !ellipse(27049.557373, 29612.491669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25725.889862, 29515.899048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29520.132000, 26472.300000, 1239.728036, 1239.728036, 0.000000, X, Y) && !ellipse(25848.703552, 25202.700409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29680.228000, 27796.234000, 2644.992076, 2644.992076, 0.000000, X, Y) && !ellipse(23940.778259, 27533.234680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24500.916000, 26817.479400, 1162.384033, 1162.384033, 0.000000, X, Y) && !ellipse(28502.450470, 25974.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19734.959625, 37952.687408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28533.438000, 30226.448000, 1312.576038, 1312.576038, 0.000000, X, Y) && !ellipse(30601.832000, 26758.706000, 1322.496038, 1322.496038, 0.000000, X, Y)
[Fri Aug  3 11:30:16 2012] Writing fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1.gif
[Fri Aug  3 11:30:25 2012] Mean detx,y = (27.01, -527.22) 
[Fri Aug  3 11:30:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 11:42:46 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 11:42:46 2012] Setting source spectrum file to fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 11:42:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug  3 14:22:09 2012] Updating aperture counts using extracted products
[Fri Aug  3 14:22:09 2012] Error reading totcts from fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 14:22:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 14:22:09 2012] Using photon index=1.80, rate=1.2, arf fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 14:22:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 14:22:09 2012] Updating source flux to 1e-11
[Fri Aug  3 14:23:12 2012] Reading fit data from xmm0112230301/analysis//spectral/fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug  3 14:23:12 2012] Spectral fit parameter nH value = 1.21844e+21
[Fri Aug  3 14:23:12 2012] Spectral fit parameter PhoIndex value = 1.84964
[Fri Aug  3 14:23:12 2012] Failed to get F(0.3-8.0) from xmm0112230301/analysis//spectral/fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 14:23:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 14:23:12 2012] Using Nh = 1.2e+21, photon index=1.85, rate=1.2, arf fullrun_mos1_xmm0112230301_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 14:23:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 14:23:12 2012] Updating source flux to 1.1e-11