[Sun Jun  3 05:25:34 2012] Detection parameters:
  Position = (267.9, 220.0) = 14 26 14.73 37 45 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.8 +/- 14.8
  Background counts = 69.0
  Rate = 0.004 +/- 0.0009

[Sun Jun  3 05:25:34 2012] Off-axis axis estimate = 6.10'
[Sun Jun  3 05:28:08 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 05:28:08 2012] Initial guess for spatial extent in simple fitting = 9.48"
[Sun Jun  3 05:28:08 2012] source mask rpix=2.2, npix_max = 28, mask sum = 35, frac = 1.219
[Sun Jun  3 05:28:08 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 9.48"
[Sun Jun  3 06:54:10 2012] fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_src46.ximg exists
[Sun Jun  3 06:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_src46.csv
[Sun Jun  3 06:54:10 2012] fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun Jun  3 06:54:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_src46.csv
[Sun Jun  3 06:54:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 06:54:11 2012] fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun Jun  3 06:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sun Jun  3 06:54:11 2012] fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun Jun  3 06:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sun Jun  3 06:54:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 08:42:00 2012] Spatial fit model total counts = 733.194000, observed total counts = 629.000000
[Sun Jun  3 08:42:00 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  3 08:42:00 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:42:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:42:00 2012] Assessing source extent using major
[Sun Jun  3 08:42:00 2012] Source does appear to be extended
[Sun Jun  3 08:42:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 08:42:00 2012] Deleting source due to low Poisson probability 0.8