[Sun Jun 3 05:26:29 2012] Detection parameters: Position = (323.9, 284.1) = 14 25 54.19 37 50 24.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 259.1 +/- 25.4 Background counts = 61.6 Rate = 0.01 +/- 0.001 [Sun Jun 3 05:26:30 2012] Off-axis axis estimate = 2.12' [Sun Jun 3 07:48:02 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting [Sun Jun 3 07:48:02 2012] Initial guess for spatial extent in simple fitting = 7.49" [Sun Jun 3 07:48:02 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.507 [Sun Jun 3 07:48:02 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.49" [Sun Jun 3 08:41:49 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src5.ximg exists [Sun Jun 3 08:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src5.csv [Sun Jun 3 08:41:49 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src5_1.ximg exists [Sun Jun 3 08:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src5.csv [Sun Jun 3 08:41:49 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 3 08:41:49 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Sun Jun 3 08:41:49 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Sun Jun 3 08:41:49 2012] Fit fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Sun Jun 3 08:42:11 2012] Spatial fit model total counts = 3269.620000, observed total counts = 3223.000000 [Sun Jun 3 08:42:11 2012] Offset between fit and detection position for source 6 = 9.042954 pixels [Sun Jun 3 08:42:11 2012] 3120.710000 total counts/ 1959.040000 bgd. counts: snr = 26.245879 Spatial fit parameters: Offset between fit and detection position for source 6 = 9.042954 pixels Position = (317.1, 278.1) = 14 25 56.67 37 50 2.4 Extent = 15.0 (15.0-29.9)", rotation angle = 0 Source counts = 1161.7 +/- 55.9 Background counts = 1959.0 Rate = 0.05 +/- 0.002 [Sun Jun 3 08:42:11 2012] Source 6 is offset by -5.718644 and -0.411094 pixels which is larger than 2 X fitted extent = 3.985991 x 3.985991, not incorporating fit results [Sun Jun 3 08:42:11 2012] Vigneting correction estimate = 1.000000 [Sun Jun 3 08:42:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 3 08:42:11 2012] Assessing source extent using major axis lower bound [Sun Jun 3 08:42:11 2012] Source does appear to be extended [Sun Jun 3 08:42:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 3 09:49:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Jun 3 09:49:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jun 3 09:49:08 2012] Initial guess for spatial extent in simple fitting = 14.97" [Sun Jun 3 09:49:08 2012] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.030 [Sun Jun 3 09:49:08 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.97" [Sun Jun 3 10:54:53 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src5.ximg exists [Sun Jun 3 10:54:53 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src5_1.ximg exists [Sun Jun 3 10:54:53 2012] Fit fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src5 appears to have run properly [Sun Jun 3 10:54:54 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Sun Jun 3 10:54:54 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Sun Jun 3 10:54:54 2012] Fit fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Sun Jun 3 10:55:07 2012] Warning, spatial fit 5 centroid is now closest to src. 27 [Sun Jun 3 10:55:07 2012] Source 6 is offset by -5.719954 and 4.508713 pixels which is larger than 2 X fitted extent = 5.667908 x 5.667908, not incorporating fit results [Sun Jun 3 10:55:07 2012] Vigneting correction estimate = 1.000000 [Sun Jun 3 10:55:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 3 10:55:07 2012] Assessing source extent using major axis lower bound [Sun Jun 3 10:55:07 2012] Source does appear to be extended [Sun Jun 3 10:55:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 3 10:55:07 2012] Source is confused with source 27 [Sun Jun 3 20:54:07 2012] Counts = 1161.670000, rescaling region sizes by 2.000000 [Sun Jun 3 20:54:07 2012] XMMSAS src. selection expression = ellipse(27540.578000, 24147.578000, 1796.760052, 1796.760052, 0.000000, X, Y) [Sun Jun 3 20:54:07 2012] Writing source region out to fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6_src.reg [Sun Jun 3 20:54:07 2012] Extracting stamp from image fullrun_mos2_xmm0112230201_pi300-10000_cl_sm2.00.img.gz, (214, 175) - (420, 381) [Sun Jun 3 20:54:07 2012] XMMSAS bgd. selection expression = annulus(27540.578000, 24147.578000, 5989.200172, 11978.400345, X, Y) && !ellipse(26220.551025, 23631.122192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.531860, 23238.329193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16494.224228, 20148.232193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38651.499084, 24647.812561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24338.673200, 19197.007000, 348.106410, 348.106410, 0.000000, X, Y) && !ellipse(24629.726501, 35626.109131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29145.256958, 23647.434692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28223.417511, 21889.760162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.339386, 24210.476135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24896.641907, 30998.868317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28202.666000, 24799.140000, 2395.680069, 2395.680069, 0.000000, X, Y) && !ellipse(21338.516342, 11799.755417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.914000, 24573.616000, 1197.384034, 1197.384034, 0.000000, X, Y) && !ellipse(26777.671753, 20743.621185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27869.855225, 25863.401794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24932.673309, 21172.227875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24395.838000, 20828.374000, 1351.504039, 1351.504039, 0.000000, X, Y) [Sun Jun 3 20:54:07 2012] Writing fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6.gif [Sun Jun 3 21:02:05 2012] Mean detx,y = (569.76, 614.43) [Sun Jun 3 21:02:06 2012] Setting backscal keywords in source and bgd. spectrum [Sun Jun 3 21:07:11 2012] Binned source spectrum to 10 counts/bin [Sun Jun 3 21:07:11 2012] Setting source spectrum file to fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Sun Jun 3 21:07:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6_bgd.pi.gz [Mon Jun 4 00:36:02 2012] Updating aperture counts using extracted products [Mon Jun 4 00:36:03 2012] Error reading totcts from fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Mon Jun 4 00:36:04 2012] Calculating source flux in energy range 0.30-8.00 [Mon Jun 4 00:36:04 2012] Using photon index=1.80, rate=0.0455, arf fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6.arf [Mon Jun 4 00:36:04 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 4 00:36:04 2012] Updating source flux to 4e-13 [Mon Jun 4 00:37:45 2012] Flag b found in src. 6 procflags, skipping spectral fitting [Mon Jun 4 00:37:45 2012] Flag c found in src. 6 procflags, skipping spectral fitting [Mon Jun 4 00:39:26 2012] Reading fit data from xmm0112230201/analysis//spectral/fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6_pl.csv [Mon Jun 4 00:39:26 2012] Spectral fit parameter nH value = 4.01618e+20 [Mon Jun 4 00:39:26 2012] Spectral fit parameter PhoIndex value = 1.63348 [Mon Jun 4 00:39:26 2012] Failed to get F(0.3-8.0) from xmm0112230201/analysis//spectral/fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected [Mon Jun 4 00:39:26 2012] Calculating source flux in energy range 0.30-8.00 [Mon Jun 4 00:39:26 2012] Using Nh = 4e+20, photon index=1.63, rate=0.0455, arf fullrun_mos2_xmm0112230201_pi300-10000_pass1_cl_src6.arf [Mon Jun 4 00:39:26 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 4 00:39:26 2012] Updating source flux to 4.5e-13