[Sun Jun  3 05:26:30 2012] Detection parameters:
  Position = (284.4, 291.6) = 14 26 8.70 37 51 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.1 +/- 15.0
  Background counts = 63.3
  Rate = 0.003 +/- 0.0006

[Sun Jun  3 05:26:30 2012] Off-axis axis estimate = 1.13'
[Sun Jun  3 07:48:02 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 07:48:02 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Sun Jun  3 07:48:02 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Sun Jun  3 07:48:02 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.00"
[Sun Jun  3 08:41:49 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src30.ximg exists
[Sun Jun  3 08:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src30.csv
[Sun Jun  3 08:41:49 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Jun  3 08:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src30.csv
[Sun Jun  3 08:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 08:41:49 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Jun  3 08:41:49 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Jun  3 08:41:49 2012] Fit fullrun_mos2_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun Jun  3 08:42:11 2012] Source 23 is offset by -6.063334 and 6.057932 pixels which is larger than
2 X fitted extent = 5.554621 x 5.554621, not incorporating fit results
[Sun Jun  3 08:42:11 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:42:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:42:11 2012] Assessing source extent using major
[Sun Jun  3 08:42:11 2012] Source does appear to be extended
[Sun Jun  3 08:42:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 08:42:11 2012] Source is confused with source 22
[Sun Jun  3 09:49:08 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 09:49:08 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Sun Jun  3 09:49:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Sun Jun  3 09:49:08 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.00"
[Sun Jun  3 10:54:53 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src27.ximg exists
[Sun Jun  3 10:54:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src27.csv
[Sun Jun  3 10:54:53 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Jun  3 10:54:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src27.csv
[Sun Jun  3 10:54:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 10:54:54 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Jun  3 10:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Jun  3 10:54:54 2012] fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Jun  3 10:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Jun  3 10:54:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 10:55:07 2012] Warning, spatial fit 27 centroid is now closest to src. 22
[Sun Jun  3 10:55:07 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 10:55:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 10:55:07 2012] Assessing source extent using major
[Sun Jun  3 10:55:07 2012] Source does appear to be extended
[Sun Jun  3 10:55:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 10:55:07 2012] Deleting source due to low Poisson probability 0.9