[Sun Jun  3 05:26:01 2012] Detection parameters:
  Position = (190.0, 232.2) = 14 26 43.31 37 46 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.3 +/- 20.5
  Background counts = 11.1
  Rate = 0.02 +/- 0.001

[Sun Jun  3 05:26:01 2012] Off-axis axis estimate = 9.21'
[Sun Jun  3 06:54:11 2012] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 06:54:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 06:54:11 2012] Initial guess for spatial extent in simple fitting = 11.03"
[Sun Jun  3 06:54:11 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.976
[Sun Jun  3 06:54:11 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.03"
[Sun Jun  3 07:48:01 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun  3 07:48:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src4.csv
[Sun Jun  3 07:48:01 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun  3 07:48:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src4.csv
[Sun Jun  3 07:48:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 07:48:02 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun  3 07:48:02 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun  3 07:48:02 2012] Fit fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Jun  3 08:42:06 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.901791 pixels away
[Sun Jun  3 08:42:06 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:42:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:42:06 2012] Assessing source extent using major
[Sun Jun  3 08:42:06 2012] Source does appear to be extended
[Sun Jun  3 08:42:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 09:18:51 2012] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 09:18:51 2012] Initial guess for spatial extent in simple fitting = 11.03"
[Sun Jun  3 09:18:51 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.976
[Sun Jun  3 09:18:51 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.03"
[Sun Jun  3 09:49:08 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun  3 09:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src4.csv
[Sun Jun  3 09:49:08 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun  3 09:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src4.csv
[Sun Jun  3 09:49:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:49:08 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun  3 09:49:08 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun  3 09:49:08 2012] Fit fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Jun  3 10:55:02 2012] Spatial fit model total counts = 330.999000, observed total counts = 331.000000
[Sun Jun  3 10:55:02 2012] Offset between fit and detection position for source 4 = 0.295565 pixels
[Sun Jun  3 10:55:02 2012] 331.553000 total counts/ 131.809000 bgd. counts: snr = 17.398075
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.295565 pixels
  Position = (190.0, 232.5) = 14 26 43.31 37 46 43.6
  Extent = 6.6 (5.9-7.4)", rotation angle = 0
  Source counts = 199.7 +/- 18.2
  Background counts = 131.8
  Rate = 0.008 +/- 0.0007
[Sun Jun  3 10:55:02 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 10:55:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 10:55:02 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 10:55:02 2012] Source does appear to be extended
[Sun Jun  3 10:55:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 12:22:21 2012] XMMSAS src. selection expression = ellipse(16484.225500, 20179.727000, 394.398611, 394.398611, 0.000000, X, Y)
[Sun Jun  3 12:22:21 2012] Writing source region out to fullrun_mos1_xmm0112230201_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun  3 12:22:21 2012] Extracting stamp from image fullrun_mos1_xmm0112230201_pi300-10000_cl_sm2.00.img.gz, (167, 210) - (213, 255)
[Sun Jun  3 12:22:21 2012] XMMSAS bgd. selection expression = annulus(16484.225500, 20179.727000, 657.331019, 1314.662038, X, Y)
[Sun Jun  3 12:22:21 2012] Writing fullrun_mos1_xmm0112230201_pi300-10000_pass1_cl_src4.gif
[Sun Jun  3 12:31:47 2012] Mean detx,y = (-3849.64, 9402.55) 
[Sun Jun  3 12:31:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 12:31:55 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 12:31:55 2012] Setting source spectrum file to fullrun_mos1_xmm0112230201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun  3 12:31:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112230201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun  4 00:36:01 2012] Updating aperture counts using extracted products
[Mon Jun  4 00:36:01 2012] Error reading totcts from fullrun_mos1_xmm0112230201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun  4 00:36:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 00:36:02 2012] Using photon index=1.80, rate=0.00783, arf fullrun_mos1_xmm0112230201_pi300-10000_pass1_cl_src4.arf
[Mon Jun  4 00:36:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 00:36:02 2012] Updating source flux to 1.3e-13