[Sun Jun  3 05:26:01 2012] Detection parameters:
  Position = (393.6, 448.0) = 14 25 28.47 38 2 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.7 +/- 12.8
  Background counts = 6.5
  Rate = 0.004 +/- 0.0005

[Sun Jun  3 05:26:01 2012] Off-axis axis estimate = 12.85'
[Sun Jun  3 06:54:11 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 06:54:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 06:54:11 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Sun Jun  3 06:54:11 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.880
[Sun Jun  3 06:54:11 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.85"
[Sun Jun  3 07:48:01 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun  3 07:48:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src17.csv
[Sun Jun  3 07:48:01 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun  3 07:48:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src17.csv
[Sun Jun  3 07:48:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 07:48:02 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun  3 07:48:02 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun  3 07:48:02 2012] Fit fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Jun  3 08:42:06 2012] Spatial fit model total counts = 191.950000, observed total counts = 177.000000
[Sun Jun  3 08:42:06 2012] Offset between fit and detection position for source 37 = 0.473151 pixels
[Sun Jun  3 08:42:06 2012] 192.870600 total counts/ 124.911000 bgd. counts: snr = 6.080657
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.473151 pixels
  Position = (393.2, 448.1) = 14 25 28.64 38 2 21.6
  Extent = 6.7 (4.5-8.5)", rotation angle = 0
  Source counts = 68.0 +/- 13.9
  Background counts = 124.9
  Rate = 0.003 +/- 0.0005
[Sun Jun  3 08:42:06 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:42:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:42:06 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 08:42:06 2012] Source does appear to be extended
[Sun Jun  3 08:42:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 08:42:06 2012] Deleting source due to low Poisson probability 0.9