[Sun Jun  3 05:26:01 2012] Detection parameters:
  Position = (332.8, 273.9) = 14 25 50.90 37 49 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.6 +/- 19.2
  Background counts = 50.6
  Rate = 0.007 +/- 0.0008

[Sun Jun  3 05:26:01 2012] Off-axis axis estimate = 3.07'
[Sun Jun  3 06:54:11 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 06:54:11 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Sun Jun  3 06:54:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.737
[Sun Jun  3 06:54:11 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.96"
[Sun Jun  3 07:48:01 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun  3 07:48:01 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun  3 07:48:01 2012] Fit fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_src9 appears to have run properly
[Sun Jun  3 07:48:02 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun  3 07:48:02 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun  3 07:48:02 2012] Fit fullrun_mos1_xmm0112230201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Jun  3 08:42:06 2012] Source 24 is offset by 7.165951 and 6.162910 pixels which is larger than
2 X fitted extent = 4.148791 x 4.148791, not incorporating fit results
[Sun Jun  3 08:42:06 2012] Spatial fit model total counts = 973.953000, observed total counts = 949.000000
[Sun Jun  3 08:42:06 2012] Offset between fit and detection position for source 24 = 7.964013 pixels
[Sun Jun  3 08:42:06 2012] Warning, changing simple spatial fit ID from 9 to 18
[Sun Jun  3 08:42:06 2012] 944.786100 total counts/ 849.813000 bgd. counts: snr = 3.257909
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 7.964013 pixels
  Position = (327.8, 280.0) = 14 25 52.75 37 50 10.6
  Extent = 15.7 (15.6-31.3)", rotation angle = 0
  Source counts = 95.0 +/- 30.7
  Background counts = 849.8
  Rate = 0.004 +/- 0.001
[Sun Jun  3 08:42:06 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 08:42:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 08:42:06 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 08:42:06 2012] Source does appear to be extended
[Sun Jun  3 08:42:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 09:18:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 09:18:51 2012] Initial guess for spatial extent in simple fitting = 15.67"
[Sun Jun  3 09:18:51 2012] source mask rpix=3.6, npix_max = 67, mask sum = 58, frac = 0.862
[Sun Jun  3 09:18:51 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 15.67"
[Sun Jun  3 09:49:08 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jun  3 09:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src8.csv
[Sun Jun  3 09:49:08 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jun  3 09:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src8.csv
[Sun Jun  3 09:49:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 09:49:08 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jun  3 09:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jun  3 09:49:08 2012] fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jun  3 09:49:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Jun  3 09:49:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112230201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 10:55:02 2012] Warning, spatial fit 8 centroid is now closest to src. 25
[Sun Jun  3 10:55:02 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 10:55:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 10:55:02 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 10:55:02 2012] Source does appear to be extended
[Sun Jun  3 10:55:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 10:55:02 2012] Deleting source due to low Poisson probability 0.9